[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.20::192.168.7.19:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 3071383039 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2749.998 MHz processor [ 0.000979] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.001011] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001014] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001064] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002926] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.003155] ACPI: Early table checksum verification disabled [ 0.003157] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.003163] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003167] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003171] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003172] ACPI: FACS 0x000000007FFE0000 000040 [ 0.003174] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003175] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003177] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003178] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003179] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.003180] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.003181] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.003181] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.003182] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.003182] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.003183] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.003215] Zone ranges: [ 0.003216] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.003217] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.003218] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.003219] Movable zone start for each node [ 0.003219] Early memory node ranges [ 0.003220] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.003221] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.003221] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.003222] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.003530] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.003552] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.730189] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.730240] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.730626] ACPI: PM-Timer IO Port: 0x608 [ 0.730638] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.730669] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.730672] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.730673] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.730674] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.730675] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.730676] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.730678] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.730679] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.730683] TSC deadline timer available [ 0.730687] CPU topo: Max. logical packages: 1 [ 0.730688] CPU topo: Max. logical dies: 1 [ 0.730688] CPU topo: Max. dies per package: 1 [ 0.730692] CPU topo: Max. threads per core: 1 [ 0.730692] CPU topo: Num. cores per package: 4 [ 0.730692] CPU topo: Num. threads per package: 4 [ 0.730693] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.730708] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.730728] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.730729] Booting paravirtualized kernel on KVM [ 0.730731] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.730736] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.732187] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.732212] Kernel command line: root=/dev/vda rw ip=192.168.7.20::192.168.7.19:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.732266] random: crng init done [ 0.743170] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.745270] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.745303] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.746568] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.746572] software IO TLB: area num 4. [ 0.746573] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.752190] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.752210] ftrace: allocating 54089 entries in 212 pages [ 0.762316] ftrace: allocated 212 pages with 4 groups [ 0.762348] Dynamic Preempt: full [ 0.764916] rcu: Preemptible hierarchical RCU implementation. [ 0.764917] rcu: RCU event tracing is enabled. [ 0.764918] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.764919] All grace periods are expedited (rcu_expedited). [ 0.764919] Trampoline variant of Tasks RCU enabled. [ 0.764920] Rude variant of Tasks RCU enabled. [ 0.764920] Tracing variant of Tasks RCU enabled. [ 0.764920] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.764921] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.764926] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.764927] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.764929] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.772212] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.772413] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.772483] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.777491] Console: colour VGA+ 80x25 [ 0.777530] printk: legacy console [ttyS0] enabled [ 0.899580] ACPI: Core revision 20240827 [ 0.900328] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.901900] APIC: Switch to symmetric I/O mode setup [ 0.902878] x2apic enabled [ 0.903636] APIC: Switched APIC routing to: physical x2apic [ 0.905629] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.906621] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.908285] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 0.909428] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.910286] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.911288] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.912287] Spectre V2 : Mitigation: Retpolines [ 0.913286] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.914286] Speculative Store Bypass: Vulnerable [ 0.915298] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.916286] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.917286] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.918286] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.919286] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.939200] Freeing SMP alternatives memory: 56K [ 0.939289] pid_max: default: 32768 minimum: 301 [ 0.940302] LSM: initializing lsm=capability,landlock [ 0.941314] landlock: Up and running. [ 0.941906] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.942290] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.943501] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.944404] Performance Events: AMD PMU driver. [ 0.945129] ... version: 0 [ 0.945288] ... bit width: 48 [ 0.946288] ... generic registers: 4 [ 0.946909] ... value mask: 0000ffffffffffff [ 0.947288] ... max period: 00007fffffffffff [ 0.948137] ... fixed-purpose events: 0 [ 0.948289] ... event mask: 000000000000000f [ 0.949170] signal: max sigframe size: 1776 [ 0.949311] rcu: Hierarchical SRCU implementation. [ 0.950085] rcu: Max phase no-delay instances is 400. [ 0.950312] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.951423] smp: Bringing up secondary CPUs ... [ 0.952225] smpboot: x86: Booting SMP configuration: [ 0.952291] .... node #0, CPUs: #1 #2 #3 [ 0.990307] smp: Brought up 1 node, 4 CPUs [ 0.992129] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 0.992577] Memory: 5081580K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 0.993395] devtmpfs: initialized [ 0.994377] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.995295] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.997330] pinctrl core: initialized pinctrl subsystem [ 0.998502] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.999386] thermal_sys: Registered thermal governor 'step_wise' [ 0.999387] thermal_sys: Registered thermal governor 'user_space' [ 1.000305] cpuidle: using governor menu [ 1.001423] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 1.002290] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 1.003080] PCI: Using configuration type 1 for base access [ 1.003330] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.025165] raid6: sse2x4 gen() 13813 MB/s [ 1.043215] raid6: sse2x2 gen() 12911 MB/s [ 1.060197] raid6: sse2x1 gen() 6654 MB/s [ 1.060292] raid6: using algorithm sse2x4 gen() 13813 MB/s [ 1.079076] raid6: .... xor() 3734 MB/s, rmw enabled [ 1.080292] raid6: using ssse3x2 recovery algorithm [ 1.081337] ACPI: Added _OSI(Module Device) [ 1.082204] ACPI: Added _OSI(Processor Device) [ 1.082291] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.084292] ACPI: Added _OSI(Processor Aggregator Device) [ 1.085932] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.089379] ACPI: Interpreter enabled [ 1.090303] ACPI: PM: (supports S0 S3 S5) [ 1.091176] ACPI: Using IOAPIC for interrupt routing [ 1.091317] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.092292] PCI: Using E820 reservations for host bridge windows [ 1.093364] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.096798] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.097296] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.098331] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.099343] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.100353] PCI host bridge to bus 0000:00 [ 1.101254] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.101292] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.102293] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.103292] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.104293] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.105292] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.106293] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.107353] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.108922] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.111091] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.112290] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.116048] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.117290] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.118867] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.120092] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.121088] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.125258] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.126562] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.128290] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.130784] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.132696] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.134757] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.135339] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.136827] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.138289] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.139806] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.142760] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.144883] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.147412] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.148800] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.150514] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.151924] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.153525] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.155078] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.155580] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.157791] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.158668] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.159471] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.163289] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.164720] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.166067] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.167405] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.168880] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.169337] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.170333] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.171323] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.172323] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.173315] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.174305] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.175294] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.176266] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.176293] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.177238] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.177292] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.178235] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.178294] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.179165] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.179297] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.180503] iommu: Default domain type: Translated [ 1.181289] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.182332] SCSI subsystem initialized [ 1.182993] ACPI: bus type USB registered [ 1.183304] usbcore: registered new interface driver usbfs [ 1.184265] usbcore: registered new interface driver hub [ 1.184293] usbcore: registered new device driver usb [ 1.185310] pps_core: LinuxPPS API ver. 1 registered [ 1.186290] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.187295] PTP clock support registered [ 1.188309] Bluetooth: Core ver 2.22 [ 1.188883] NET: Registered PF_BLUETOOTH protocol family [ 1.189291] Bluetooth: HCI device and connection manager initialized [ 1.190290] Bluetooth: HCI socket layer initialized [ 1.191249] Bluetooth: L2CAP socket layer initialized [ 1.191291] Bluetooth: SCO socket layer initialized [ 1.192074] PCI: Using ACPI for IRQ routing [ 1.246002] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.246285] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.246285] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.246291] vgaarb: loaded [ 1.246763] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.247288] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.250382] clocksource: Switched to clocksource kvm-clock [ 1.252822] pnp: PnP ACPI init [ 1.253422] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.254695] pnp: PnP ACPI: found 5 devices [ 1.261850] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.263292] NET: Registered PF_INET protocol family [ 1.264103] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.266329] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.267956] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.269172] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.277595] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.286879] TCP: Hash tables configured (established 65536 bind 65536) [ 1.288573] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.289648] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.290831] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.292005] RPC: Registered named UNIX socket transport module. [ 1.292954] RPC: Registered udp transport module. [ 1.293693] RPC: Registered tcp transport module. [ 1.294454] RPC: Registered tcp-with-tls transport module. [ 1.295321] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.296878] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.297833] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.298809] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.299878] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.300956] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.302027] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.303320] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.304568] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.305954] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.307137] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.308427] PCI: CLS 0 bytes, default 64 [ 1.309100] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.310150] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.311433] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 1.322970] Initialise system trusted keyrings [ 1.323754] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.324910] NFS: Registering the id_resolver key type [ 1.325698] Key type id_resolver registered [ 1.327041] Key type id_legacy registered [ 1.327950] Key type cifs.idmap registered [ 1.335739] xor: automatically using best checksumming function avx [ 1.336852] Key type asymmetric registered [ 1.337506] Asymmetric key parser 'x509' registered [ 1.338295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.339449] io scheduler mq-deadline registered [ 1.340152] io scheduler kyber registered [ 1.340787] io scheduler bfq registered [ 1.341595] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.345896] ACPI: button: Power Button [PWRF] [ 1.347008] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.348730] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.350370] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.354415] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.356695] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.357819] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.359108] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.361077] Linux agpgart interface v0.103 [ 1.361793] ACPI: bus type drm_connector registered [ 1.362650] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.363526] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.366642] Console: switching to colour dummy device 80x25 [ 1.367661] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.367663] [drm] features: -context_init [ 1.369772] [drm] number of scanouts: 1 [ 1.370399] [drm] number of cap sets: 0 [ 1.371293] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.384203] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.413414] Console: switching to colour frame buffer device 160x50 [ 1.428254] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.432383] brd: module loaded [ 1.434811] loop: module loaded [ 1.435448] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.437262] virtio_blk virtio3: [vda] 1040552 512-byte logical blocks (533 MB/508 MiB) [ 1.440006] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.441293] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.442299] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.458496] scsi host0: ahci [ 1.459678] scsi host1: ahci [ 1.460739] scsi host2: ahci [ 1.461852] scsi host3: ahci [ 1.462950] scsi host4: ahci [ 1.464002] scsi host5: ahci [ 1.464963] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.467577] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.470169] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.472750] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.475351] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.477946] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.482769] e100: Intel(R) PRO/100 Network Driver [ 1.484361] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.486148] e1000: Intel(R) PRO/1000 Network Driver [ 1.487738] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.489563] e1000e: Intel(R) PRO/1000 Network Driver [ 1.491136] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.493005] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.494705] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.498033] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.499052] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.533507] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.539903] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.541256] hub 1-0:1.0: USB hub found [ 1.542140] hub 1-0:1.0: 6 ports detected [ 1.544119] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.546070] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.549183] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.551744] hub 2-0:1.0: USB hub found [ 1.553209] hub 2-0:1.0: 2 ports detected [ 1.556445] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.558887] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.561945] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.564546] hub 3-0:1.0: USB hub found [ 1.566132] hub 3-0:1.0: 2 ports detected [ 1.568905] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.571228] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.574387] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.577374] hub 4-0:1.0: USB hub found [ 1.578281] hub 4-0:1.0: 2 ports detected [ 1.579086] usbcore: registered new interface driver usb-storage [ 1.580130] usbcore: registered new interface driver usbserial_generic [ 1.581270] usbserial: USB Serial support registered for generic [ 1.582303] usbcore: registered new interface driver ftdi_sio [ 1.583218] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.584377] usbcore: registered new interface driver pl2303 [ 1.585252] usbserial: USB Serial support registered for pl2303 [ 1.586226] i8042: PNP: No PS/2 controller found. [ 1.587032] mousedev: PS/2 mouse device common for all mice [ 1.588034] rtc_cmos 00:03: RTC can wake from S4 [ 1.589163] rtc_cmos 00:03: registered as rtc0 [ 1.590007] rtc_cmos 00:03: setting system clock to 2025-07-02T12:16:53 UTC (1751458613) [ 1.591432] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.592952] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.595535] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.597066] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.598172] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.599140] sdhci: Secure Digital Host Controller Interface driver [ 1.601315] sdhci: Copyright(c) Pierre Ossman [ 1.602032] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.602995] usbcore: registered new interface driver usbhid [ 1.603877] usbhid: USB HID core driver [ 1.604492] u32 classifier [ 1.604956] input device check on [ 1.605531] Actions configured [ 1.606138] NET: Registered PF_INET6 protocol family [ 1.607196] Segment Routing with IPv6 [ 1.607796] In-situ OAM (IOAM) with IPv6 [ 1.608510] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.609554] NET: Registered PF_PACKET protocol family [ 1.610391] Bridge firewalling registered [ 1.611046] l2tp_core: L2TP core driver, V2.0 [ 1.611734] Key type dns_resolver registered [ 1.612520] NET: Registered PF_VSOCK protocol family [ 1.613608] IPI shorthand broadcast: enabled [ 1.615113] sched_clock: Marking stable (1483003993, 131867229)->(1754574267, -139703045) [ 1.616515] registered taskstats version 1 [ 1.617237] Loading compiled-in X.509 certificates [ 1.618660] Key type .fscrypt registered [ 1.619320] Key type fscrypt-provisioning registered [ 1.622219] Btrfs loaded, zoned=no, fsverity=no [ 1.623503] Key type encrypted registered [ 1.624326] printk: legacy console [netcon0] enabled [ 1.625132] netconsole: network logging started [ 1.783885] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.790430] ata4: SATA link down (SStatus 0 SControl 300) [ 1.791456] ata5: SATA link down (SStatus 0 SControl 300) [ 1.792814] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.794390] ata6: SATA link down (SStatus 0 SControl 300) [ 1.795644] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.796914] ata3.00: applying bridge limits [ 1.797977] ata1: SATA link down (SStatus 0 SControl 300) [ 1.799149] ata2: SATA link down (SStatus 0 SControl 300) [ 1.801470] ata3.00: configured for UDMA/100 [ 1.809261] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.838173] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.840881] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.870927] IP-Config: Complete: [ 1.872294] device=eth0, hwaddr=52:54:00:12:34:14, ipaddr=192.168.7.20, mask=255.255.255.0, gw=192.168.7.19 [ 1.876237] host=192.168.7.20, domain=, nis-domain=(none) [ 1.878534] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.878537] nameserver0=8.8.8.8 [ 1.884065] clk: Disabling unused clocks [ 1.886243] md: Waiting for all devices to be available before autodetect [ 1.888431] md: If you don't use raid, use raid=noautodetect [ 1.890265] md: Autodetecting RAID arrays. [ 1.891579] md: autorun ... [ 1.892503] md: ... autorun DONE. [ 1.900971] EXT4-fs (vda): mounted filesystem d00f515b-c16f-40ff-951e-f9f4a4259629 r/w with ordered data mode. Quota mode: disabled. [ 1.904817] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.906919] devtmpfs: mounted [ 1.909134] Freeing unused kernel image (initmem) memory: 3528K [ 1.911072] Write protecting the kernel read-only data: 26624k [ 1.913910] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.916405] Run /sbin/init as init process [ 1.920260] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.924819] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 INIT: version 3.14 booting Starting udev [ 1.983858] udevd[140]: starting version 3.2.14 [ 1.988669] udevd[141]: starting eudev-3.2.14 [ 2.040906] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.172446] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 2.226449] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.286633] EXT4-fs (vda): re-mounted d00f515b-c16f-40ff-951e-f9f4a4259629. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-2c5e1c38a00b09d7b59bdaee59ebae91081dca8f qemux86-64 /dev/ttyS0 qemux86-64 login: