[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 403127870 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2749.998 MHz processor [ 0.000922] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000961] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000964] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001024] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002915] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.003089] ACPI: Early table checksum verification disabled [ 0.003091] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.003096] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003100] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003104] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003105] ACPI: FACS 0x000000007FFE0000 000040 [ 0.003107] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003108] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003110] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003111] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003112] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.003113] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.003114] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.003114] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.003115] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.003115] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.003116] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.003146] Zone ranges: [ 0.003146] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.003148] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.003148] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.003149] Movable zone start for each node [ 0.003150] Early memory node ranges [ 0.003150] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.003151] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.003152] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.003153] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.003258] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.003279] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.014238] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.014287] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.014645] ACPI: PM-Timer IO Port: 0x608 [ 0.014655] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.014679] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.014681] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.014682] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.014683] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.014684] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.014685] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.014687] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.014688] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.014691] TSC deadline timer available [ 0.014695] CPU topo: Max. logical packages: 1 [ 0.014695] CPU topo: Max. logical dies: 1 [ 0.014696] CPU topo: Max. dies per package: 1 [ 0.014699] CPU topo: Max. threads per core: 1 [ 0.014699] CPU topo: Num. cores per package: 4 [ 0.014700] CPU topo: Num. threads per package: 4 [ 0.014700] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.014714] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.014728] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.014730] Booting paravirtualized kernel on KVM [ 0.014731] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.014736] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.014902] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.014925] Kernel command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.014978] random: crng init done [ 0.015594] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.015894] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.015922] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.016091] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.016094] software IO TLB: area num 4. [ 0.016095] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.020313] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.020337] ftrace: allocating 54089 entries in 212 pages [ 0.029995] ftrace: allocated 212 pages with 4 groups [ 0.030025] Dynamic Preempt: full [ 0.030154] rcu: Preemptible hierarchical RCU implementation. [ 0.030155] rcu: RCU event tracing is enabled. [ 0.030155] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.030156] All grace periods are expedited (rcu_expedited). [ 0.030157] Trampoline variant of Tasks RCU enabled. [ 0.030157] Rude variant of Tasks RCU enabled. [ 0.030157] Tracing variant of Tasks RCU enabled. [ 0.030158] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.030158] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.030162] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.030164] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.030165] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.034998] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.035190] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.035265] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.039651] Console: colour VGA+ 80x25 [ 0.039685] printk: legacy console [ttyS0] enabled [ 0.161280] ACPI: Core revision 20240827 [ 0.162039] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.163590] APIC: Switch to symmetric I/O mode setup [ 0.164529] x2apic enabled [ 0.165234] APIC: Switched APIC routing to: physical x2apic [ 0.167068] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.168084] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.169840] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 0.170966] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.171840] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.172842] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.173842] Spectre V2 : Mitigation: Retpolines [ 0.174581] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.174840] Speculative Store Bypass: Vulnerable [ 0.175604] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.175841] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.176840] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.177840] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.178840] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.197560] Freeing SMP alternatives memory: 56K [ 0.197842] pid_max: default: 32768 minimum: 301 [ 0.198852] LSM: initializing lsm=capability,landlock [ 0.199864] landlock: Up and running. [ 0.200475] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.200845] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.201996] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.202950] Performance Events: AMD PMU driver. [ 0.203710] ... version: 0 [ 0.203842] ... bit width: 48 [ 0.204540] ... generic registers: 4 [ 0.204843] ... value mask: 0000ffffffffffff [ 0.205842] ... max period: 00007fffffffffff [ 0.206717] ... fixed-purpose events: 0 [ 0.206842] ... event mask: 000000000000000f [ 0.207787] signal: max sigframe size: 1776 [ 0.207861] rcu: Hierarchical SRCU implementation. [ 0.208662] rcu: Max phase no-delay instances is 400. [ 0.208862] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.209963] smp: Bringing up secondary CPUs ... [ 0.210788] smpboot: x86: Booting SMP configuration: [ 0.210845] .... node #0, CPUs: #1 #2 #3 [ 0.244871] smp: Brought up 1 node, 4 CPUs [ 0.246526] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 0.247143] Memory: 5081580K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 0.247903] devtmpfs: initialized [ 0.248540] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.248846] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.249962] pinctrl core: initialized pinctrl subsystem [ 0.251075] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.251922] thermal_sys: Registered thermal governor 'step_wise' [ 0.251923] thermal_sys: Registered thermal governor 'user_space' [ 0.252851] cpuidle: using governor menu [ 0.254683] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.254848] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.255851] PCI: Using configuration type 1 for base access [ 0.256894] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.274844] raid6: sse2x4 gen() 14569 MB/s [ 0.291842] raid6: sse2x2 gen() 13792 MB/s [ 0.308845] raid6: sse2x1 gen() 7971 MB/s [ 0.309568] raid6: using algorithm sse2x4 gen() 14569 MB/s [ 0.326844] raid6: .... xor() 2945 MB/s, rmw enabled [ 0.327666] raid6: using ssse3x2 recovery algorithm [ 0.327904] ACPI: Added _OSI(Module Device) [ 0.328592] ACPI: Added _OSI(Processor Device) [ 0.328842] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.329612] ACPI: Added _OSI(Processor Aggregator Device) [ 0.330242] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.331405] ACPI: Interpreter enabled [ 0.331850] ACPI: PM: (supports S0 S3 S5) [ 0.332503] ACPI: Using IOAPIC for interrupt routing [ 0.332854] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.333842] PCI: Using E820 reservations for host bridge windows [ 0.334872] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.336611] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.336846] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.337864] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.338868] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.339878] PCI host bridge to bus 0000:00 [ 0.340550] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.340842] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.341842] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.342842] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.343843] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.344842] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 0.345842] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.346788] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.347263] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.348844] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 0.350482] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 0.353843] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 0.355696] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 0.356332] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.357791] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 0.358844] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 0.361653] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 0.363010] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.364844] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 0.367205] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 0.368687] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 0.370269] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 0.370891] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.372362] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.373843] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 0.375755] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 0.377843] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 0.380298] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.381955] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 0.383388] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.385367] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 0.386425] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.387954] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 0.389428] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.390244] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 0.392175] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.393204] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.394030] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.398058] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 0.399264] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 0.400556] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.401931] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 0.403491] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.403901] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.404895] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.405898] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.406901] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.407896] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.408895] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.409901] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.410874] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.411851] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.412827] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.412845] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.413833] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.413845] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.414823] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.414858] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.416048] iommu: Default domain type: Translated [ 0.416843] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.417880] SCSI subsystem initialized [ 0.418499] ACPI: bus type USB registered [ 0.418854] usbcore: registered new interface driver usbfs [ 0.419767] usbcore: registered new interface driver hub [ 0.419847] usbcore: registered new device driver usb [ 0.420681] pps_core: LinuxPPS API ver. 1 registered [ 0.420842] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.421844] PTP clock support registered [ 0.422509] Bluetooth: Core ver 2.22 [ 0.422847] NET: Registered PF_BLUETOOTH protocol family [ 0.423718] Bluetooth: HCI device and connection manager initialized [ 0.423844] Bluetooth: HCI socket layer initialized [ 0.424634] Bluetooth: L2CAP socket layer initialized [ 0.424844] Bluetooth: SCO socket layer initialized [ 0.425649] PCI: Using ACPI for IRQ routing [ 0.473213] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.473839] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.473839] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.473846] vgaarb: loaded [ 0.474330] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.474842] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.477890] clocksource: Switched to clocksource kvm-clock [ 0.478860] pnp: PnP ACPI init [ 0.479468] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.480783] pnp: PnP ACPI: found 5 devices [ 0.488208] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.489680] NET: Registered PF_INET protocol family [ 0.490636] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.492890] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.494371] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.495624] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.497083] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.498483] TCP: Hash tables configured (established 65536 bind 65536) [ 0.499559] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.500675] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.501875] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.503057] RPC: Registered named UNIX socket transport module. [ 0.504032] RPC: Registered udp transport module. [ 0.504789] RPC: Registered tcp transport module. [ 0.505553] RPC: Registered tcp-with-tls transport module. [ 0.506453] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.507502] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.508500] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.509506] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.510647] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.511750] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.512880] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 0.514227] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.515502] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.516722] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.518260] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.519568] PCI: CLS 0 bytes, default 64 [ 0.520282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.521352] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 0.522663] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.525461] Initialise system trusted keyrings [ 0.526355] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.527790] NFS: Registering the id_resolver key type [ 0.528615] Key type id_resolver registered [ 0.529313] Key type id_legacy registered [ 0.530558] Key type cifs.idmap registered [ 0.538264] xor: automatically using best checksumming function avx [ 0.539419] Key type asymmetric registered [ 0.540095] Asymmetric key parser 'x509' registered [ 0.540898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.542126] io scheduler mq-deadline registered [ 0.542857] io scheduler kyber registered [ 0.543524] io scheduler bfq registered [ 0.544416] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.546734] ACPI: button: Power Button [PWRF] [ 0.549725] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.554087] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.558575] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.564822] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.568679] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.571608] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.575083] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.580874] Linux agpgart interface v0.103 [ 0.582783] ACPI: bus type drm_connector registered [ 0.584959] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.587246] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.594486] Console: switching to colour dummy device 80x25 [ 0.597135] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.597138] [drm] features: -context_init [ 0.602522] [drm] number of scanouts: 1 [ 0.603830] [drm] number of cap sets: 0 [ 0.605407] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 0.609370] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.625846] Console: switching to colour frame buffer device 160x50 [ 0.653081] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.658437] brd: module loaded [ 0.659925] loop: module loaded [ 0.660594] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.662546] virtio_blk virtio3: [vda] 1040544 512-byte logical blocks (533 MB/508 MiB) [ 0.665684] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 0.667247] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.668698] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.670845] scsi host0: ahci [ 0.671691] scsi host1: ahci [ 0.672532] scsi host2: ahci [ 0.673416] scsi host3: ahci [ 0.674263] scsi host4: ahci [ 0.675107] scsi host5: ahci [ 0.675832] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 0.677697] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 0.679674] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 0.681600] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 0.683581] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 0.685569] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 0.689057] e100: Intel(R) PRO/100 Network Driver [ 0.692384] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.693656] e1000: Intel(R) PRO/1000 Network Driver [ 0.694763] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.696173] e1000e: Intel(R) PRO/1000 Network Driver [ 0.697356] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.698767] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.700075] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.702401] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.704569] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.706476] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.708224] hub 1-0:1.0: USB hub found [ 0.709181] hub 1-0:1.0: 2 ports detected [ 0.710387] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.711714] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.713272] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.719678] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.720816] hub 2-0:1.0: USB hub found [ 0.721461] hub 2-0:1.0: 6 ports detected [ 0.742734] hub 1-0:1.0: USB hub found [ 0.743378] hub 1-0:1.0: 2 ports detected [ 0.744160] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.746436] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.749756] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.752556] hub 3-0:1.0: USB hub found [ 0.754192] hub 3-0:1.0: 2 ports detected [ 0.757207] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.759496] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.762973] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.765868] hub 4-0:1.0: USB hub found [ 0.767491] hub 4-0:1.0: 2 ports detected [ 0.769425] usbcore: registered new interface driver usb-storage [ 0.772277] usbcore: registered new interface driver usbserial_generic [ 0.775037] usbserial: USB Serial support registered for generic [ 0.777567] usbcore: registered new interface driver ftdi_sio [ 0.780015] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.783105] usbcore: registered new interface driver pl2303 [ 0.785455] usbserial: USB Serial support registered for pl2303 [ 0.788052] i8042: PNP: No PS/2 controller found. [ 0.790193] mousedev: PS/2 mouse device common for all mice [ 0.792739] rtc_cmos 00:03: RTC can wake from S4 [ 0.795626] rtc_cmos 00:03: registered as rtc0 [ 0.797666] rtc_cmos 00:03: setting system clock to 2025-07-04T22:03:22 UTC (1751666602) [ 0.800604] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.803333] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.803499] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.804691] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.807707] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 0.811367] sdhci: Secure Digital Host Controller Interface driver [ 0.813503] sdhci: Copyright(c) Pierre Ossman [ 0.815007] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.816996] usbcore: registered new interface driver usbhid [ 0.818912] usbhid: USB HID core driver [ 0.820231] u32 classifier [ 0.821154] input device check on [ 0.822394] Actions configured [ 0.823714] NET: Registered PF_INET6 protocol family [ 0.825959] Segment Routing with IPv6 [ 0.826713] In-situ OAM (IOAM) with IPv6 [ 0.827461] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.828663] NET: Registered PF_PACKET protocol family [ 0.829622] Bridge firewalling registered [ 0.830415] l2tp_core: L2TP core driver, V2.0 [ 0.831231] Key type dns_resolver registered [ 0.832142] NET: Registered PF_VSOCK protocol family [ 0.833422] IPI shorthand broadcast: enabled [ 0.835040] sched_clock: Marking stable (704001835, 130643298)->(919304518, -84659385) [ 0.836602] registered taskstats version 1 [ 0.837398] Loading compiled-in X.509 certificates [ 0.839120] Key type .fscrypt registered [ 0.839869] Key type fscrypt-provisioning registered [ 0.840945] Btrfs loaded, zoned=no, fsverity=no [ 0.842231] Key type encrypted registered [ 0.843114] printk: legacy console [netcon0] enabled [ 0.844058] netconsole: network logging started [ 0.957714] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.996013] ata6: SATA link down (SStatus 0 SControl 300) [ 0.997125] ata1: SATA link down (SStatus 0 SControl 300) [ 0.998374] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.000865] ata2: SATA link down (SStatus 0 SControl 300) [ 1.003165] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.005640] ata3.00: applying bridge limits [ 1.007739] ata5: SATA link down (SStatus 0 SControl 300) [ 1.010286] ata4: SATA link down (SStatus 0 SControl 300) [ 1.011253] ata3.00: configured for UDMA/100 [ 1.013596] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.035948] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.037110] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.058664] IP-Config: Complete: [ 1.060093] device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15 [ 1.064700] host=192.168.7.16, domain=, nis-domain=(none) [ 1.067166] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.067168] nameserver0=8.8.8.8 [ 1.071871] clk: Disabling unused clocks [ 1.074441] md: Waiting for all devices to be available before autodetect [ 1.076825] md: If you don't use raid, use raid=noautodetect [ 1.078859] md: Autodetecting RAID arrays. [ 1.080189] md: autorun ... [ 1.081011] md: ... autorun DONE. [ 1.089627] EXT4-fs (vda): mounted filesystem 6de8275d-1601-4ebc-aeb6-1b06f5f25cf5 r/w with ordered data mode. Quota mode: disabled. [ 1.092514] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.093951] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.095919] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.098146] devtmpfs: mounted [ 1.101800] Freeing unused kernel image (initmem) memory: 3528K [ 1.103510] Write protecting the kernel read-only data: 26624k [ 1.105395] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.107256] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 1.133687] udevd[139]: starting version 3.2.14 [ 1.136944] udevd[140]: starting eudev-3.2.14 [ 1.211678] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.343419] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.398186] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.463256] EXT4-fs (vda): re-mounted 6de8275d-1601-4ebc-aeb6-1b06f5f25cf5. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-ac5fa62a3c3e674620615f39cdc61e54c46eed3e qemux86-64 /dev/ttyS0 qemux86-64 login: