[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 431879736 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000005] tsc: Detected 2749.998 MHz processor [ 0.001060] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.001121] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001124] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001212] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.003412] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.003781] ACPI: Early table checksum verification disabled [ 0.003785] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.003794] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003799] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003805] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003808] ACPI: FACS 0x000000007FFE0000 000040 [ 0.003809] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003811] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003813] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003815] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.003817] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.003818] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.003819] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.003820] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.003821] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.003821] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.003822] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.003878] Zone ranges: [ 0.003879] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.003881] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.003882] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.003884] Movable zone start for each node [ 0.003884] Early memory node ranges [ 0.003885] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.003886] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.003887] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.003889] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.004110] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.004142] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.023078] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.023149] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.024935] ACPI: PM-Timer IO Port: 0x608 [ 0.024951] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.024992] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.024995] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.024997] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.024998] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.024999] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.025000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.025003] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.025004] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.025009] TSC deadline timer available [ 0.025014] CPU topo: Max. logical packages: 1 [ 0.025015] CPU topo: Max. logical dies: 1 [ 0.025016] CPU topo: Max. dies per package: 1 [ 0.025020] CPU topo: Max. threads per core: 1 [ 0.025021] CPU topo: Num. cores per package: 4 [ 0.025021] CPU topo: Num. threads per package: 4 [ 0.025021] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.025040] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.025065] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.025067] Booting paravirtualized kernel on KVM [ 0.025069] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.025075] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.025394] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.025431] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.025504] random: crng init done [ 0.026650] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.027227] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.027263] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.027570] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.027573] software IO TLB: area num 4. [ 0.027575] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.033105] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.033131] ftrace: allocating 54089 entries in 212 pages [ 0.044387] ftrace: allocated 212 pages with 4 groups [ 0.044441] Dynamic Preempt: full [ 0.044705] rcu: Preemptible hierarchical RCU implementation. [ 0.044706] rcu: RCU event tracing is enabled. [ 0.044707] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.044708] All grace periods are expedited (rcu_expedited). [ 0.044709] Trampoline variant of Tasks RCU enabled. [ 0.044709] Rude variant of Tasks RCU enabled. [ 0.044710] Tracing variant of Tasks RCU enabled. [ 0.044711] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.044711] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.044718] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.044720] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.044721] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.052159] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.052391] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.052480] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.061414] Console: colour VGA+ 80x25 [ 0.061470] printk: legacy console [ttyS0] enabled [ 0.229904] ACPI: Core revision 20240827 [ 0.230908] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.232876] APIC: Switch to symmetric I/O mode setup [ 0.234156] x2apic enabled [ 0.235061] APIC: Switched APIC routing to: physical x2apic [ 0.237566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.239457] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.241621] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 0.242827] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.243622] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.244625] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.245625] Spectre V2 : Mitigation: Retpolines [ 0.246623] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.247623] Speculative Store Bypass: Vulnerable [ 0.248641] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.249622] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.250622] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.251624] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.252622] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.277532] Freeing SMP alternatives memory: 56K [ 0.277628] pid_max: default: 32768 minimum: 301 [ 0.278644] LSM: initializing lsm=capability,landlock [ 0.279658] landlock: Up and running. [ 0.280652] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.281627] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.282881] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.283787] Performance Events: AMD PMU driver. [ 0.284627] ... version: 0 [ 0.285420] ... bit width: 48 [ 0.285629] ... generic registers: 4 [ 0.286382] ... value mask: 0000ffffffffffff [ 0.286626] ... max period: 00007fffffffffff [ 0.287624] ... fixed-purpose events: 0 [ 0.288624] ... event mask: 000000000000000f [ 0.289703] signal: max sigframe size: 1776 [ 0.290576] rcu: Hierarchical SRCU implementation. [ 0.290625] rcu: Max phase no-delay instances is 400. [ 0.291663] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.292800] smp: Bringing up secondary CPUs ... [ 0.293710] smpboot: x86: Booting SMP configuration: [ 0.294629] .... node #0, CPUs: #1 #2 #3 [ 0.328642] smp: Brought up 1 node, 4 CPUs [ 0.330527] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 0.331380] Memory: 5081580K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 0.331730] devtmpfs: initialized [ 0.332760] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.333628] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.334911] pinctrl core: initialized pinctrl subsystem [ 0.335957] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.336755] thermal_sys: Registered thermal governor 'step_wise' [ 0.336757] thermal_sys: Registered thermal governor 'user_space' [ 0.337644] cpuidle: using governor menu [ 0.339611] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.339631] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.340638] PCI: Using configuration type 1 for base access [ 0.341702] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.359626] raid6: sse2x4 gen() 13860 MB/s [ 0.377626] raid6: sse2x2 gen() 12071 MB/s [ 0.395627] raid6: sse2x1 gen() 6282 MB/s [ 0.396627] raid6: using algorithm sse2x4 gen() 13860 MB/s [ 0.414628] raid6: .... xor() 3972 MB/s, rmw enabled [ 0.415627] raid6: using ssse3x2 recovery algorithm [ 0.416716] ACPI: Added _OSI(Module Device) [ 0.417626] ACPI: Added _OSI(Processor Device) [ 0.418568] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.418626] ACPI: Added _OSI(Processor Aggregator Device) [ 0.420304] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.421737] ACPI: Interpreter enabled [ 0.422638] ACPI: PM: (supports S0 S3 S5) [ 0.423629] ACPI: Using IOAPIC for interrupt routing [ 0.424666] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.425625] PCI: Using E820 reservations for host bridge windows [ 0.426710] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.429124] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.429630] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.430664] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.431676] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.432682] PCI host bridge to bus 0000:00 [ 0.433518] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.433626] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.434626] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.435626] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.436628] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.437626] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 0.438626] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.439692] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.441279] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.443628] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 0.446627] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 0.452629] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 0.454626] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 0.456386] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.457627] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 0.460625] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 0.464627] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 0.468428] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.470391] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 0.473380] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 0.474626] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 0.477627] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 0.478689] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.480385] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.481627] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 0.483627] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 0.488626] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 0.491451] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.493957] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 0.496394] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.498626] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 0.500707] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.504858] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 0.506769] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.508160] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 0.511282] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.512127] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.512894] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.517279] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 0.518584] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 0.519872] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.522843] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 0.524794] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.525719] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.526702] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.527693] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.528691] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.529692] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.530701] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.531703] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.532664] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.533635] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.534639] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.535638] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.536637] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.537637] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.538636] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.539636] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.540955] iommu: Default domain type: Translated [ 0.541626] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.542696] SCSI subsystem initialized [ 0.543640] ACPI: bus type USB registered [ 0.544526] usbcore: registered new interface driver usbfs [ 0.544636] usbcore: registered new interface driver hub [ 0.545637] usbcore: registered new device driver usb [ 0.546644] pps_core: LinuxPPS API ver. 1 registered [ 0.547625] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.548631] PTP clock support registered [ 0.549638] Bluetooth: Core ver 2.22 [ 0.550320] NET: Registered PF_BLUETOOTH protocol family [ 0.550623] Bluetooth: HCI device and connection manager initialized [ 0.551625] Bluetooth: HCI socket layer initialized [ 0.552628] Bluetooth: L2CAP socket layer initialized [ 0.553631] Bluetooth: SCO socket layer initialized [ 0.554667] PCI: Using ACPI for IRQ routing [ 0.628651] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.629620] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.629620] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.629631] vgaarb: loaded [ 0.630239] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.630626] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.636192] clocksource: Switched to clocksource kvm-clock [ 0.637179] pnp: PnP ACPI init [ 0.637967] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.639615] pnp: PnP ACPI: found 5 devices [ 0.647337] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.649055] NET: Registered PF_INET protocol family [ 0.650045] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.653045] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.654858] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.656437] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.658368] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.660164] TCP: Hash tables configured (established 65536 bind 65536) [ 0.661380] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.662614] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.664053] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.666103] RPC: Registered named UNIX socket transport module. [ 0.667398] RPC: Registered udp transport module. [ 0.668359] RPC: Registered tcp transport module. [ 0.669247] RPC: Registered tcp-with-tls transport module. [ 0.670260] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.671467] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.672657] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.673798] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.675060] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 0.676353] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.677621] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 0.679159] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.680650] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.682282] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.683863] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.685490] PCI: CLS 0 bytes, default 64 [ 0.686309] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.687682] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 0.689425] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.692196] Initialise system trusted keyrings [ 0.693313] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 0.695828] NFS: Registering the id_resolver key type [ 0.697004] Key type id_resolver registered [ 0.697991] Key type id_legacy registered [ 0.699173] Key type cifs.idmap registered [ 0.709815] xor: automatically using best checksumming function avx [ 0.711512] Key type asymmetric registered [ 0.712479] Asymmetric key parser 'x509' registered [ 0.713633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.715387] io scheduler mq-deadline registered [ 0.716398] io scheduler kyber registered [ 0.717346] io scheduler bfq registered [ 0.718577] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.721312] ACPI: button: Power Button [PWRF] [ 0.722944] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.726106] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.728267] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.732836] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.734945] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.736281] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.737874] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.743892] Linux agpgart interface v0.103 [ 0.744848] ACPI: bus type drm_connector registered [ 0.745888] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.747015] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.751136] Console: switching to colour dummy device 80x25 [ 0.752688] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.752690] [drm] features: -context_init [ 0.768406] [drm] number of scanouts: 1 [ 0.769269] [drm] number of cap sets: 0 [ 0.771604] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 0.774204] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.788799] Console: switching to colour frame buffer device 160x50 [ 0.792382] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.805889] brd: module loaded [ 0.807778] loop: module loaded [ 0.808655] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.811299] virtio_blk virtio3: [vda] 788192 512-byte logical blocks (404 MB/385 MiB) [ 0.815437] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 0.817270] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.818674] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.820908] scsi host0: ahci [ 0.821794] scsi host1: ahci [ 0.822649] scsi host2: ahci [ 0.823719] scsi host3: ahci [ 0.824608] scsi host4: ahci [ 0.825474] scsi host5: ahci [ 0.826160] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 0.827945] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 0.829829] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 0.831658] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 0.833486] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 0.835285] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 0.838833] e100: Intel(R) PRO/100 Network Driver [ 0.839953] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.841147] e1000: Intel(R) PRO/1000 Network Driver [ 0.842248] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.843485] e1000e: Intel(R) PRO/1000 Network Driver [ 0.844463] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.845748] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.846981] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.849666] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.851335] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.852871] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.854389] hub 1-0:1.0: USB hub found [ 0.855098] hub 1-0:1.0: 2 ports detected [ 0.856344] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.858147] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.860287] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.867267] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.868771] hub 2-0:1.0: USB hub found [ 0.869666] hub 2-0:1.0: 6 ports detected [ 0.891402] hub 1-0:1.0: USB hub found [ 0.892397] hub 1-0:1.0: 2 ports detected [ 0.893449] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.894716] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.896514] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.898058] hub 3-0:1.0: USB hub found [ 0.898950] hub 3-0:1.0: 2 ports detected [ 0.900663] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.901943] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.903727] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.905147] hub 4-0:1.0: USB hub found [ 0.905970] hub 4-0:1.0: 2 ports detected [ 0.906885] usbcore: registered new interface driver usb-storage [ 0.908033] usbcore: registered new interface driver usbserial_generic [ 0.909344] usbserial: USB Serial support registered for generic [ 0.910722] usbcore: registered new interface driver ftdi_sio [ 0.911976] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.913558] usbcore: registered new interface driver pl2303 [ 0.914602] usbserial: USB Serial support registered for pl2303 [ 0.915768] i8042: PNP: No PS/2 controller found. [ 0.916717] mousedev: PS/2 mouse device common for all mice [ 0.917844] rtc_cmos 00:03: RTC can wake from S4 [ 0.919323] rtc_cmos 00:03: registered as rtc0 [ 0.920246] rtc_cmos 00:03: setting system clock to 2025-07-04T16:02:39 UTC (1751644959) [ 0.921823] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.923661] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.923788] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.925524] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 0.926785] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.928064] sdhci: Secure Digital Host Controller Interface driver [ 0.930766] sdhci: Copyright(c) Pierre Ossman [ 0.931590] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.932691] usbcore: registered new interface driver usbhid [ 0.933691] usbhid: USB HID core driver [ 0.934423] u32 classifier [ 0.934930] input device check on [ 0.935594] Actions configured [ 0.936287] NET: Registered PF_INET6 protocol family [ 0.937444] Segment Routing with IPv6 [ 0.938128] In-situ OAM (IOAM) with IPv6 [ 0.938883] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.940056] NET: Registered PF_PACKET protocol family [ 0.941003] Bridge firewalling registered [ 0.941803] l2tp_core: L2TP core driver, V2.0 [ 0.942712] Key type dns_resolver registered [ 0.944788] NET: Registered PF_VSOCK protocol family [ 0.946090] IPI shorthand broadcast: enabled [ 0.947971] sched_clock: Marking stable (763001984, 184217218)->(1075946351, -128727149) [ 0.949569] registered taskstats version 1 [ 0.950333] Loading compiled-in X.509 certificates [ 0.951947] Key type .fscrypt registered [ 0.952693] Key type fscrypt-provisioning registered [ 0.953919] Btrfs loaded, zoned=no, fsverity=no [ 0.955603] Key type encrypted registered [ 0.956627] printk: legacy console [netcon0] enabled [ 0.957660] netconsole: network logging started [ 1.108282] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.146179] ata1: SATA link down (SStatus 0 SControl 300) [ 1.147566] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.148998] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.150131] ata3.00: applying bridge limits [ 1.151087] ata3.00: configured for UDMA/100 [ 1.152245] ata4: SATA link down (SStatus 0 SControl 300) [ 1.153396] ata6: SATA link down (SStatus 0 SControl 300) [ 1.154604] ata2: SATA link down (SStatus 0 SControl 300) [ 1.155730] ata5: SATA link down (SStatus 0 SControl 300) [ 1.157183] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.185454] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.186755] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.280256] IP-Config: Complete: [ 1.280910] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 1.282748] host=192.168.7.8, domain=, nis-domain=(none) [ 1.283800] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.283802] nameserver0=8.8.8.8 [ 1.286063] clk: Disabling unused clocks [ 1.287184] md: Waiting for all devices to be available before autodetect [ 1.288291] md: If you don't use raid, use raid=noautodetect [ 1.289192] md: Autodetecting RAID arrays. [ 1.289806] md: autorun ... [ 1.290249] md: ... autorun DONE. [ 1.295004] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.297554] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.298090] EXT4-fs (vda): mounted filesystem 5fd97ff7-d26f-45f4-bb37-2538a686f71c r/w with ordered data mode. Quota mode: disabled. [ 1.301698] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.302757] devtmpfs: mounted [ 1.304021] Freeing unused kernel image (initmem) memory: 3528K [ 1.304974] Write protecting the kernel read-only data: 26624k [ 1.306061] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.307236] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 1.413003] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.419705] udevd[137]: starting version 3.2.14 [ 1.423230] udevd[138]: starting eudev-3.2.14 [ 1.600898] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.653914] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.713530] EXT4-fs (vda): re-mounted 5fd97ff7-d26f-45f4-bb37-2538a686f71c. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-99ced83a27af69902a17289dcd511e43f4eeb490 qemux86-64 /dev/ttyS0 qemux86-64 login: