[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 1327584316 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2750.000 MHz processor [ 0.000886] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000917] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000919] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000965] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002792] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.005061] ACPI: Early table checksum verification disabled [ 0.005063] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.005069] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005073] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005077] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005079] ACPI: FACS 0x000000007FFE0000 000040 [ 0.005080] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005082] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005083] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005085] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005086] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.005087] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.005087] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.005088] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.005088] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.005089] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.005089] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.005119] Zone ranges: [ 0.005120] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005121] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.005122] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005122] Movable zone start for each node [ 0.005123] Early memory node ranges [ 0.005123] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.005124] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.005125] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.005126] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.006797] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006819] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.641047] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.641097] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.641467] ACPI: PM-Timer IO Port: 0x608 [ 0.641478] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.641505] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.641508] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.641509] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.641510] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.641511] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.641511] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.641514] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.641515] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.641518] TSC deadline timer available [ 0.641522] CPU topo: Max. logical packages: 1 [ 0.641523] CPU topo: Max. logical dies: 1 [ 0.641523] CPU topo: Max. dies per package: 1 [ 0.641526] CPU topo: Max. threads per core: 1 [ 0.641527] CPU topo: Num. cores per package: 4 [ 0.641527] CPU topo: Num. threads per package: 4 [ 0.641528] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.641542] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.641563] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.641564] Booting paravirtualized kernel on KVM [ 0.641566] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.641571] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.642822] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.642846] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.642900] random: crng init done [ 0.687303] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.689724] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.689758] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.691012] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.691016] software IO TLB: area num 4. [ 0.691017] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.697729] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.697749] ftrace: allocating 54089 entries in 212 pages [ 0.707546] ftrace: allocated 212 pages with 4 groups [ 0.707578] Dynamic Preempt: full [ 0.708943] rcu: Preemptible hierarchical RCU implementation. [ 0.708943] rcu: RCU event tracing is enabled. [ 0.708943] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.708945] All grace periods are expedited (rcu_expedited). [ 0.708945] Trampoline variant of Tasks RCU enabled. [ 0.708945] Rude variant of Tasks RCU enabled. [ 0.708946] Tracing variant of Tasks RCU enabled. [ 0.708946] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.708947] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.708951] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.708953] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.708954] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.715196] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.715441] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.715523] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.721761] Console: colour VGA+ 80x25 [ 0.721803] printk: legacy console [ttyS0] enabled [ 0.856443] ACPI: Core revision 20240827 [ 0.857304] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.859115] APIC: Switch to symmetric I/O mode setup [ 0.860243] x2apic enabled [ 0.861022] APIC: Switched APIC routing to: physical x2apic [ 0.863108] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.866503] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 0.868570] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000) [ 0.869713] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.870570] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.871575] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.872573] Spectre V2 : Mitigation: Retpolines [ 0.873365] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.873571] Speculative Store Bypass: Vulnerable [ 0.874582] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.875571] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.876570] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.877571] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.878570] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.898152] Freeing SMP alternatives memory: 56K [ 0.898573] pid_max: default: 32768 minimum: 301 [ 0.899586] LSM: initializing lsm=capability,landlock [ 0.900596] landlock: Up and running. [ 0.901226] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.901574] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.902756] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.903697] Performance Events: AMD PMU driver. [ 0.904485] ... version: 0 [ 0.904573] ... bit width: 48 [ 0.905262] ... generic registers: 4 [ 0.905572] ... value mask: 0000ffffffffffff [ 0.906489] ... max period: 00007fffffffffff [ 0.906572] ... fixed-purpose events: 0 [ 0.907275] ... event mask: 000000000000000f [ 0.907665] signal: max sigframe size: 1776 [ 0.908388] rcu: Hierarchical SRCU implementation. [ 0.908573] rcu: Max phase no-delay instances is 400. [ 0.909467] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.909703] smp: Bringing up secondary CPUs ... [ 0.910535] smpboot: x86: Booting SMP configuration: [ 0.910575] .... node #0, CPUs: #1 #2 #3 [ 0.945652] smp: Brought up 1 node, 4 CPUs [ 0.946574] smpboot: Total of 4 processors activated (22000.00 BogoMIPS) [ 0.947959] Memory: 5081832K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 0.948633] devtmpfs: initialized [ 0.949281] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.949575] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.950594] pinctrl core: initialized pinctrl subsystem [ 0.952737] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.953656] thermal_sys: Registered thermal governor 'step_wise' [ 0.953657] thermal_sys: Registered thermal governor 'user_space' [ 0.954584] cpuidle: using governor menu [ 0.956357] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.956574] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.957581] PCI: Using configuration type 1 for base access [ 0.958596] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.978573] raid6: sse2x4 gen() 24002 MB/s [ 0.995572] raid6: sse2x2 gen() 25526 MB/s [ 1.012573] raid6: sse2x1 gen() 8271 MB/s [ 1.013301] raid6: using algorithm sse2x2 gen() 25526 MB/s [ 1.030572] raid6: .... xor() 19082 MB/s, rmw enabled [ 1.031465] raid6: using ssse3x2 recovery algorithm [ 1.031635] ACPI: Added _OSI(Module Device) [ 1.032371] ACPI: Added _OSI(Processor Device) [ 1.032573] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.033389] ACPI: Added _OSI(Processor Aggregator Device) [ 1.033992] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.035638] ACPI: Interpreter enabled [ 1.036299] ACPI: PM: (supports S0 S3 S5) [ 1.036574] ACPI: Using IOAPIC for interrupt routing [ 1.037457] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.037572] PCI: Using E820 reservations for host bridge windows [ 1.038613] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.040405] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.040578] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.041595] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.042600] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.043608] PCI host bridge to bus 0000:00 [ 1.044311] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.044573] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.045572] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.046572] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.047572] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.048572] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.049572] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.050556] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.051005] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.052573] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.054284] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.057574] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.060559] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.061093] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.062537] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.063491] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.067573] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.070060] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.072034] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.074098] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.075514] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.077026] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.077614] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.079086] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.081330] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.082573] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.086577] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.090159] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.092052] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.093290] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.094976] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.097198] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.098822] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.100225] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.100893] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.103415] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.103937] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.104751] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.107793] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.109048] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.111113] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.112837] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.114332] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.114622] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.115625] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.116620] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.117617] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.118622] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.119617] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.120615] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.121592] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.122577] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.123576] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.124576] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.125578] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.126576] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.127575] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.128576] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.129761] iommu: Default domain type: Translated [ 1.130573] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.131619] SCSI subsystem initialized [ 1.132277] ACPI: bus type USB registered [ 1.132584] usbcore: registered new interface driver usbfs [ 1.133577] usbcore: registered new interface driver hub [ 1.134484] usbcore: registered new device driver usb [ 1.134581] pps_core: LinuxPPS API ver. 1 registered [ 1.135420] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.135574] PTP clock support registered [ 1.136247] Bluetooth: Core ver 2.22 [ 1.136577] NET: Registered PF_BLUETOOTH protocol family [ 1.137467] Bluetooth: HCI device and connection manager initialized [ 1.137573] Bluetooth: HCI socket layer initialized [ 1.138390] Bluetooth: L2CAP socket layer initialized [ 1.138574] Bluetooth: SCO socket layer initialized [ 1.139407] PCI: Using ACPI for IRQ routing [ 1.186958] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.187569] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.187569] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.187579] vgaarb: loaded [ 1.188223] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.188575] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.195628] clocksource: Switched to clocksource kvm-clock [ 1.218844] pnp: PnP ACPI init [ 1.219672] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.221279] pnp: PnP ACPI: found 5 devices [ 1.229088] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.231165] NET: Registered PF_INET protocol family [ 1.233614] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.235967] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.237442] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.238753] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.240135] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.242771] TCP: Hash tables configured (established 65536 bind 65536) [ 1.244851] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.246015] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.247271] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.248471] RPC: Registered named UNIX socket transport module. [ 1.249482] RPC: Registered udp transport module. [ 1.250283] RPC: Registered tcp transport module. [ 1.251082] RPC: Registered tcp-with-tls transport module. [ 1.252014] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.253101] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.254206] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.255260] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.256420] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.257579] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.258771] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.260156] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.261465] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.262693] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.263985] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.265342] PCI: CLS 0 bytes, default 64 [ 1.266065] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.267180] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.268536] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns [ 1.274277] Initialise system trusted keyrings [ 1.277757] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.279284] NFS: Registering the id_resolver key type [ 1.280163] Key type id_resolver registered [ 1.280872] Key type id_legacy registered [ 1.282065] Key type cifs.idmap registered [ 1.289874] xor: automatically using best checksumming function avx [ 1.291087] Key type asymmetric registered [ 1.291959] Asymmetric key parser 'x509' registered [ 1.293001] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.294538] io scheduler mq-deadline registered [ 1.295472] io scheduler kyber registered [ 1.296276] io scheduler bfq registered [ 1.297277] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.302156] ACPI: button: Power Button [PWRF] [ 1.303623] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.306834] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.308926] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.315417] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.317613] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.319087] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.320888] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.323621] Linux agpgart interface v0.103 [ 1.324564] ACPI: bus type drm_connector registered [ 1.325714] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.326903] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.330572] Console: switching to colour dummy device 80x25 [ 1.357331] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.357334] [drm] features: -context_init [ 1.359727] [drm] number of scanouts: 1 [ 1.360393] [drm] number of cap sets: 0 [ 1.361370] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.364160] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.382335] Console: switching to colour frame buffer device 160x50 [ 1.400804] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.432841] brd: module loaded [ 1.434112] loop: module loaded [ 1.434781] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.436599] virtio_blk virtio3: [vda] 788192 512-byte logical blocks (404 MB/385 MiB) [ 1.439822] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.441228] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.442338] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.444042] scsi host0: ahci [ 1.444800] scsi host1: ahci [ 1.445495] scsi host2: ahci [ 1.446219] scsi host3: ahci [ 1.446917] scsi host4: ahci [ 1.447605] scsi host5: ahci [ 1.448139] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.449543] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.450979] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.452390] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.453807] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.455219] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.457784] e100: Intel(R) PRO/100 Network Driver [ 1.458630] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.459626] e1000: Intel(R) PRO/1000 Network Driver [ 1.460484] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.461483] e1000e: Intel(R) PRO/1000 Network Driver [ 1.462338] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.463412] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.464354] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.466069] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.467903] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.469554] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.473485] hub 1-0:1.0: USB hub found [ 1.474695] hub 1-0:1.0: 2 ports detected [ 1.476407] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.478026] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.479776] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.486167] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.487525] hub 2-0:1.0: USB hub found [ 1.488281] hub 2-0:1.0: 6 ports detected [ 1.510261] hub 1-0:1.0: USB hub found [ 1.510976] hub 1-0:1.0: 2 ports detected [ 1.511820] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.514250] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.517577] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.520402] hub 3-0:1.0: USB hub found [ 1.522060] hub 3-0:1.0: 2 ports detected [ 1.524896] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.529210] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.530648] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.531850] hub 4-0:1.0: USB hub found [ 1.532530] hub 4-0:1.0: 2 ports detected [ 1.533390] usbcore: registered new interface driver usb-storage [ 1.534448] usbcore: registered new interface driver usbserial_generic [ 1.535593] usbserial: USB Serial support registered for generic [ 1.536645] usbcore: registered new interface driver ftdi_sio [ 1.537937] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.539303] usbcore: registered new interface driver pl2303 [ 1.540262] usbserial: USB Serial support registered for pl2303 [ 1.541299] i8042: PNP: No PS/2 controller found. [ 1.542226] mousedev: PS/2 mouse device common for all mice [ 1.543364] rtc_cmos 00:03: RTC can wake from S4 [ 1.544628] rtc_cmos 00:03: registered as rtc0 [ 1.545470] rtc_cmos 00:03: setting system clock to 2025-07-05T06:45:17 UTC (1751697917) [ 1.546931] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.548596] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.549990] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.550456] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.554137] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.556991] sdhci: Secure Digital Host Controller Interface driver [ 1.562781] sdhci: Copyright(c) Pierre Ossman [ 1.564219] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.566076] usbcore: registered new interface driver usbhid [ 1.567845] usbhid: USB HID core driver [ 1.569051] u32 classifier [ 1.569978] input device check on [ 1.571134] Actions configured [ 1.572273] NET: Registered PF_INET6 protocol family [ 1.575954] Segment Routing with IPv6 [ 1.577306] In-situ OAM (IOAM) with IPv6 [ 1.578721] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.580800] NET: Registered PF_PACKET protocol family [ 1.582410] Bridge firewalling registered [ 1.583717] l2tp_core: L2TP core driver, V2.0 [ 1.585143] Key type dns_resolver registered [ 1.586594] NET: Registered PF_VSOCK protocol family [ 1.588845] IPI shorthand broadcast: enabled [ 1.591695] sched_clock: Marking stable (1442006140, 149118370)->(1683496940, -92372430) [ 1.594493] registered taskstats version 1 [ 1.596005] Loading compiled-in X.509 certificates [ 1.598722] Key type .fscrypt registered [ 1.600207] Key type fscrypt-provisioning registered [ 1.612825] Btrfs loaded, zoned=no, fsverity=no [ 1.614638] Key type encrypted registered [ 1.615537] printk: legacy console [netcon0] enabled [ 1.616541] netconsole: network logging started [ 1.728182] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.766297] ata2: SATA link down (SStatus 0 SControl 300) [ 1.768466] ata6: SATA link down (SStatus 0 SControl 300) [ 1.771687] ata1: SATA link down (SStatus 0 SControl 300) [ 1.774408] ata4: SATA link down (SStatus 0 SControl 300) [ 1.776554] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.781262] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.783731] ata3.00: applying bridge limits [ 1.785790] ata5: SATA link down (SStatus 0 SControl 300) [ 1.788474] ata3.00: configured for UDMA/100 [ 1.790832] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.810473] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.813774] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.834170] IP-Config: Complete: [ 1.835795] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.840325] host=192.168.7.2, domain=, nis-domain=(none) [ 1.842944] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.842947] nameserver0=8.8.8.8 [ 1.848331] clk: Disabling unused clocks [ 1.851047] md: Waiting for all devices to be available before autodetect [ 1.853896] md: If you don't use raid, use raid=noautodetect [ 1.856517] md: Autodetecting RAID arrays. [ 1.858454] md: autorun ... [ 1.859599] md: ... autorun DONE. [ 1.868569] EXT4-fs (vda): mounted filesystem ff869a63-98df-4284-8682-924a1c7a6189 r/w with ordered data mode. Quota mode: disabled. [ 1.871603] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.873835] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.878427] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.881277] devtmpfs: mounted [ 1.888986] Freeing unused kernel image (initmem) memory: 3528K [ 1.891801] Write protecting the kernel read-only data: 26624k [ 1.895027] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.898146] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 1.962087] udevd[137]: starting version 3.2.14 [ 1.968971] udevd[138]: starting eudev-3.2.14 [ 1.997213] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 2.133577] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.188935] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.253435] EXT4-fs (vda): re-mounted ff869a63-98df-4284-8682-924a1c7a6189. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-8e8e2f593ff4a353c5cc4d148a9a4afadfe54e89 qemux86-64 /dev/ttyS0 qemux86-64 login: