[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 1142560021 cycles [ 0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000017] tsc: Detected 2749.998 MHz processor [ 0.000935] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000974] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000977] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001037] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002905] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.034702] ACPI: Early table checksum verification disabled [ 0.034716] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.034738] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.034743] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.034751] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.034753] ACPI: FACS 0x000000007FFE0000 000040 [ 0.034755] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.034756] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.034758] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.034759] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.034760] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.034762] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.034762] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.034763] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.034763] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.034764] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.034764] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.034830] Zone ranges: [ 0.034831] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.034837] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.034838] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.034839] Movable zone start for each node [ 0.034843] Early memory node ranges [ 0.034844] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.034845] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.034846] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.034847] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.081372] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.081397] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.519435] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.519503] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.520051] ACPI: PM-Timer IO Port: 0x608 [ 0.520067] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.520111] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.520113] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.520116] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.520117] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.520118] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.520120] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.520123] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.520124] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.520129] TSC deadline timer available [ 0.520135] CPU topo: Max. logical packages: 1 [ 0.520136] CPU topo: Max. logical dies: 1 [ 0.520137] CPU topo: Max. dies per package: 1 [ 0.520141] CPU topo: Max. threads per core: 1 [ 0.520142] CPU topo: Num. cores per package: 4 [ 0.520143] CPU topo: Num. threads per package: 4 [ 0.520143] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.520163] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.520189] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.520191] Booting paravirtualized kernel on KVM [ 0.520193] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.520200] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.537854] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.537886] Kernel command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.537962] random: crng init done [ 0.610160] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.648392] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.648445] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.662739] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.662747] software IO TLB: area num 4. [ 0.662749] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.678167] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.678194] ftrace: allocating 54089 entries in 212 pages [ 0.689629] ftrace: allocated 212 pages with 4 groups [ 0.689680] Dynamic Preempt: full [ 0.698404] rcu: Preemptible hierarchical RCU implementation. [ 0.698406] rcu: RCU event tracing is enabled. [ 0.698407] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.698409] All grace periods are expedited (rcu_expedited). [ 0.698410] Trampoline variant of Tasks RCU enabled. [ 0.698410] Rude variant of Tasks RCU enabled. [ 0.698411] Tracing variant of Tasks RCU enabled. [ 0.698411] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.698412] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.698418] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.698420] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.698421] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.714783] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.714990] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.715066] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.721690] Console: colour VGA+ 80x25 [ 0.721741] printk: legacy console [ttyS0] enabled [ 0.877371] ACPI: Core revision 20240827 [ 0.878326] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.880282] APIC: Switch to symmetric I/O mode setup [ 0.881607] x2apic enabled [ 0.882560] APIC: Switched APIC routing to: physical x2apic [ 0.885122] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.886449] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.889241] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 0.890469] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.891242] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.892244] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.893243] Spectre V2 : Mitigation: Retpolines [ 0.894168] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.894243] Speculative Store Bypass: Vulnerable [ 0.895260] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.896242] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.897242] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.898242] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.899241] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.923776] Freeing SMP alternatives memory: 56K [ 0.924248] pid_max: default: 32768 minimum: 301 [ 0.925265] LSM: initializing lsm=capability,landlock [ 0.926284] landlock: Up and running. [ 0.927276] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.928248] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.930315] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.931415] Performance Events: AMD PMU driver. [ 0.932248] ... version: 0 [ 0.933107] ... bit width: 48 [ 0.933246] ... generic registers: 4 [ 0.934081] ... value mask: 0000ffffffffffff [ 0.934245] ... max period: 00007fffffffffff [ 0.935244] ... fixed-purpose events: 0 [ 0.936035] ... event mask: 000000000000000f [ 0.936325] signal: max sigframe size: 1776 [ 0.937286] rcu: Hierarchical SRCU implementation. [ 0.938246] rcu: Max phase no-delay instances is 400. [ 0.939286] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.940427] smp: Bringing up secondary CPUs ... [ 0.941343] smpboot: x86: Booting SMP configuration: [ 0.942250] .... node #0, CPUs: #1 #2 #3 [ 0.981269] smp: Brought up 1 node, 4 CPUs [ 0.983135] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 0.983601] Memory: 5081832K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 0.984358] devtmpfs: initialized [ 0.985264] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.986249] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.987272] pinctrl core: initialized pinctrl subsystem [ 0.989423] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.990420] thermal_sys: Registered thermal governor 'step_wise' [ 0.990433] thermal_sys: Registered thermal governor 'user_space' [ 0.991260] cpuidle: using governor menu [ 0.993068] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.993246] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.994252] PCI: Using configuration type 1 for base access [ 0.995295] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.023124] raid6: sse2x4 gen() 14497 MB/s [ 1.039442] raid6: sse2x2 gen() 19381 MB/s [ 1.056259] raid6: sse2x1 gen() 4979 MB/s [ 1.057246] raid6: using algorithm sse2x2 gen() 19381 MB/s [ 1.076079] raid6: .... xor() 14269 MB/s, rmw enabled [ 1.076244] raid6: using ssse3x2 recovery algorithm [ 1.077171] ACPI: Added _OSI(Module Device) [ 1.078244] ACPI: Added _OSI(Processor Device) [ 1.079025] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.080246] ACPI: Added _OSI(Processor Aggregator Device) [ 1.081904] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.085346] ACPI: Interpreter enabled [ 1.086258] ACPI: PM: (supports S0 S3 S5) [ 1.087142] ACPI: Using IOAPIC for interrupt routing [ 1.088272] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.090245] PCI: Using E820 reservations for host bridge windows [ 1.091319] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.093760] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.095249] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.097281] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.098288] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.100298] PCI host bridge to bus 0000:00 [ 1.101186] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.102246] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.104251] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.106246] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.107245] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.109245] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.111246] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.112317] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.114885] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.119246] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.123246] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.130246] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.134191] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.136878] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.139160] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.141245] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.148245] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.150789] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.153843] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.157921] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.160260] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.164259] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.165327] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.168886] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.172245] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.174230] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.179801] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.182929] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.186654] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.189048] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.193618] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.195966] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.198616] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.202142] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.203644] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.206143] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.208685] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.210453] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.216687] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.217711] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.220303] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.225825] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.227097] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.228308] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.229297] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.230290] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.231293] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.233302] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.234290] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.236298] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.237267] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.238257] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.239254] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.241250] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.242249] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.243249] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.244263] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.245252] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.246485] iommu: Default domain type: Translated [ 1.247246] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.248316] SCSI subsystem initialized [ 1.249281] ACPI: bus type USB registered [ 1.250260] usbcore: registered new interface driver usbfs [ 1.251251] usbcore: registered new interface driver hub [ 1.252235] usbcore: registered new device driver usb [ 1.254259] pps_core: LinuxPPS API ver. 1 registered [ 1.255153] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.256249] PTP clock support registered [ 1.257289] Bluetooth: Core ver 2.22 [ 1.257973] NET: Registered PF_BLUETOOTH protocol family [ 1.259244] Bluetooth: HCI device and connection manager initialized [ 1.260252] Bluetooth: HCI socket layer initialized [ 1.261176] Bluetooth: L2CAP socket layer initialized [ 1.262252] Bluetooth: SCO socket layer initialized [ 1.263272] PCI: Using ACPI for IRQ routing [ 1.321424] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.322240] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.322240] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.325249] vgaarb: loaded [ 1.325797] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.326244] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.330325] clocksource: Switched to clocksource kvm-clock [ 1.331638] pnp: PnP ACPI init [ 1.332314] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.333775] pnp: PnP ACPI: found 5 devices [ 1.389426] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.391372] NET: Registered PF_INET protocol family [ 1.392307] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.394710] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.396222] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.397607] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.399088] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.416725] TCP: Hash tables configured (established 65536 bind 65536) [ 1.441429] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.442773] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.444143] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.445516] RPC: Registered named UNIX socket transport module. [ 1.446573] RPC: Registered udp transport module. [ 1.447432] RPC: Registered tcp transport module. [ 1.448391] RPC: Registered tcp-with-tls transport module. [ 1.449626] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.451114] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.452644] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.453765] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.454988] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.456249] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.457442] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.458913] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.460448] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.461836] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.465519] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.466975] PCI: CLS 0 bytes, default 64 [ 1.467759] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.469007] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.470457] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 1.481379] Initialise system trusted keyrings [ 1.482478] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.483843] NFS: Registering the id_resolver key type [ 1.484903] Key type id_resolver registered [ 1.485734] Key type id_legacy registered [ 1.509153] Key type cifs.idmap registered [ 1.517961] xor: automatically using best checksumming function avx [ 1.519350] Key type asymmetric registered [ 1.520074] Asymmetric key parser 'x509' registered [ 1.520967] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.522260] io scheduler mq-deadline registered [ 1.523062] io scheduler kyber registered [ 1.523774] io scheduler bfq registered [ 1.524741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.530353] ACPI: button: Power Button [PWRF] [ 1.532029] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.534390] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.536653] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.542688] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.544854] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.546128] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.547944] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.550583] Linux agpgart interface v0.103 [ 1.551621] ACPI: bus type drm_connector registered [ 1.552795] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.553779] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.558322] Console: switching to colour dummy device 80x25 [ 1.559465] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.559466] [drm] features: -context_init [ 1.562082] [drm] number of scanouts: 1 [ 1.562767] [drm] number of cap sets: 0 [ 1.563739] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.621374] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.640206] Console: switching to colour frame buffer device 160x50 [ 1.651178] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.685632] brd: module loaded [ 1.708841] loop: module loaded [ 1.709583] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.711662] virtio_blk virtio3: [vda] 1040544 512-byte logical blocks (533 MB/508 MiB) [ 1.716510] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.717977] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.719100] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.720954] scsi host0: ahci [ 1.721607] scsi host1: ahci [ 1.722290] scsi host2: ahci [ 1.723127] scsi host3: ahci [ 1.723930] scsi host4: ahci [ 1.724571] scsi host5: ahci [ 1.725120] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.726573] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.728053] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.730281] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.731819] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.733332] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.736179] e100: Intel(R) PRO/100 Network Driver [ 1.737075] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.738081] e1000: Intel(R) PRO/1000 Network Driver [ 1.739023] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.740068] e1000e: Intel(R) PRO/1000 Network Driver [ 1.740949] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.742005] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.742959] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.745331] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.746833] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.772253] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.779281] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.780815] hub 1-0:1.0: USB hub found [ 1.781699] hub 1-0:1.0: 6 ports detected [ 1.782831] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.784215] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.785943] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.787239] hub 2-0:1.0: USB hub found [ 1.787970] hub 2-0:1.0: 2 ports detected [ 1.789351] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.790405] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.791975] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.793736] hub 3-0:1.0: USB hub found [ 1.794716] hub 3-0:1.0: 2 ports detected [ 1.796485] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.797843] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.799943] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.801499] hub 4-0:1.0: USB hub found [ 1.802481] hub 4-0:1.0: 2 ports detected [ 1.803728] usbcore: registered new interface driver usb-storage [ 1.805230] usbcore: registered new interface driver usbserial_generic [ 1.807071] usbserial: USB Serial support registered for generic [ 1.808550] usbcore: registered new interface driver ftdi_sio [ 1.809929] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.811727] usbcore: registered new interface driver pl2303 [ 1.813087] usbserial: USB Serial support registered for pl2303 [ 1.814523] i8042: PNP: No PS/2 controller found. [ 1.815801] mousedev: PS/2 mouse device common for all mice [ 1.817298] rtc_cmos 00:03: RTC can wake from S4 [ 1.818998] rtc_cmos 00:03: registered as rtc0 [ 1.820103] rtc_cmos 00:03: setting system clock to 2025-07-06T17:24:39 UTC (1751822679) [ 1.822053] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.824062] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.825269] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.851103] hpet: Lost 1 RTC interrupts [ 1.852270] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.854583] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.856390] sdhci: Secure Digital Host Controller Interface driver [ 1.857823] sdhci: Copyright(c) Pierre Ossman [ 1.858910] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.860329] usbcore: registered new interface driver usbhid [ 1.861656] usbhid: USB HID core driver [ 1.862596] u32 classifier [ 1.863232] input device check on [ 1.864099] Actions configured [ 1.864985] NET: Registered PF_INET6 protocol family [ 1.866536] Segment Routing with IPv6 [ 1.867469] In-situ OAM (IOAM) with IPv6 [ 1.868401] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.869902] NET: Registered PF_PACKET protocol family [ 1.871094] Bridge firewalling registered [ 1.872067] l2tp_core: L2TP core driver, V2.0 [ 1.873088] Key type dns_resolver registered [ 1.874167] NET: Registered PF_VSOCK protocol family [ 1.875781] IPI shorthand broadcast: enabled [ 1.877919] sched_clock: Marking stable (1708005578, 169243947)->(1938663209, -61413684) [ 1.879909] registered taskstats version 1 [ 1.880907] Loading compiled-in X.509 certificates [ 1.883008] Key type .fscrypt registered [ 1.883935] Key type fscrypt-provisioning registered [ 1.895032] Btrfs loaded, zoned=no, fsverity=no [ 1.896620] Key type encrypted registered [ 1.897490] printk: legacy console [netcon0] enabled [ 1.898444] netconsole: network logging started [ 2.019293] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.042952] ata6: SATA link down (SStatus 0 SControl 300) [ 2.044429] ata1: SATA link down (SStatus 0 SControl 300) [ 2.045727] ata5: SATA link down (SStatus 0 SControl 300) [ 2.046919] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.048516] ata2: SATA link down (SStatus 0 SControl 300) [ 2.049791] ata4: SATA link down (SStatus 0 SControl 300) [ 2.051160] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 2.052191] ata3.00: applying bridge limits [ 2.053038] ata3.00: configured for UDMA/100 [ 2.054067] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 2.082507] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 2.083968] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.105276] IP-Config: Complete: [ 2.106020] device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15 [ 2.108156] host=192.168.7.16, domain=, nis-domain=(none) [ 2.109387] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.109389] nameserver0=8.8.8.8 [ 2.111799] clk: Disabling unused clocks [ 2.112958] md: Waiting for all devices to be available before autodetect [ 2.114097] md: If you don't use raid, use raid=noautodetect [ 2.115058] md: Autodetecting RAID arrays. [ 2.115745] md: autorun ... [ 2.116238] md: ... autorun DONE. [ 2.121632] EXT4-fs (vda): mounted filesystem c0c0bb92-11ad-4fda-bb2b-abeb85ab6f68 r/w with ordered data mode. Quota mode: disabled. [ 2.123637] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.124709] devtmpfs: mounted [ 2.126010] Freeing unused kernel image (initmem) memory: 3528K [ 2.127012] Write protecting the kernel read-only data: 26624k [ 2.128199] Freeing unused kernel image (rodata/data gap) memory: 284K [ 2.129286] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 2.153337] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 2.156054] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 2.157815] udevd[138]: starting version 3.2.14 [ 2.161317] udevd[139]: starting eudev-3.2.14 [ 2.269330] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.400604] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 2.453588] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.513616] EXT4-fs (vda): re-mounted c0c0bb92-11ad-4fda-bb2b-abeb85ab6f68. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-352a526545d368f29fc02f14649025374e5fb2b8 qemux86-64 /dev/ttyS0 qemux86-64 login: