[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 1293786153 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000007] tsc: Detected 2749.998 MHz processor [ 0.000936] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.000981] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000984] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001045] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.002940] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.018819] ACPI: Early table checksum verification disabled [ 0.018831] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.018855] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018860] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018868] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018870] ACPI: FACS 0x000000007FFE0000 000040 [ 0.018872] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018874] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018875] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018877] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.018878] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.018879] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.018880] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.018880] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.018881] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.018881] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.018882] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.018950] Zone ranges: [ 0.018951] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.018957] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.018958] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.018959] Movable zone start for each node [ 0.018964] Early memory node ranges [ 0.018964] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.018966] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.018966] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.018968] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.019659] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019680] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.406508] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.406578] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.408414] ACPI: PM-Timer IO Port: 0x608 [ 0.408436] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.408476] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.408479] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.408481] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.408482] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.408484] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.408485] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.408488] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.408489] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.408494] TSC deadline timer available [ 0.408499] CPU topo: Max. logical packages: 1 [ 0.408500] CPU topo: Max. logical dies: 1 [ 0.408501] CPU topo: Max. dies per package: 1 [ 0.408505] CPU topo: Max. threads per core: 1 [ 0.408506] CPU topo: Num. cores per package: 4 [ 0.408506] CPU topo: Num. threads per package: 4 [ 0.408507] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.408525] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.408549] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.408551] Booting paravirtualized kernel on KVM [ 0.408553] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.408566] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.409010] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.409048] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.409143] random: crng init done [ 0.410578] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.411241] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.411279] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.411594] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.411597] software IO TLB: area num 4. [ 0.411599] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.416824] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.416849] ftrace: allocating 54089 entries in 212 pages [ 0.429031] ftrace: allocated 212 pages with 4 groups [ 0.429084] Dynamic Preempt: full [ 0.456995] rcu: Preemptible hierarchical RCU implementation. [ 0.456998] rcu: RCU event tracing is enabled. [ 0.456999] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.457003] All grace periods are expedited (rcu_expedited). [ 0.457003] Trampoline variant of Tasks RCU enabled. [ 0.457004] Rude variant of Tasks RCU enabled. [ 0.457004] Tracing variant of Tasks RCU enabled. [ 0.457005] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.457006] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.457014] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.457016] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.457017] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.464512] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.464742] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.464822] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.474896] Console: colour VGA+ 80x25 [ 0.474948] printk: legacy console [ttyS0] enabled [ 0.627925] ACPI: Core revision 20240827 [ 0.628867] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.630866] APIC: Switch to symmetric I/O mode setup [ 0.632193] x2apic enabled [ 0.633120] APIC: Switched APIC routing to: physical x2apic [ 0.635337] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.636448] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.638409] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 0.639581] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.640410] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.641412] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.642412] Spectre V2 : Mitigation: Retpolines [ 0.643410] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.644411] Speculative Store Bypass: Vulnerable [ 0.645426] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.646411] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.647409] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.648411] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.649409] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.671149] Freeing SMP alternatives memory: 56K [ 0.671413] pid_max: default: 32768 minimum: 301 [ 0.672428] LSM: initializing lsm=capability,landlock [ 0.673440] landlock: Up and running. [ 0.674440] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.675417] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.677558] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.678563] Performance Events: AMD PMU driver. [ 0.679415] ... version: 0 [ 0.680228] ... bit width: 48 [ 0.680412] ... generic registers: 4 [ 0.681248] ... value mask: 0000ffffffffffff [ 0.681413] ... max period: 00007fffffffffff [ 0.682413] ... fixed-purpose events: 0 [ 0.683227] ... event mask: 000000000000000f [ 0.683528] signal: max sigframe size: 1776 [ 0.684452] rcu: Hierarchical SRCU implementation. [ 0.685412] rcu: Max phase no-delay instances is 400. [ 0.686453] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.687553] smp: Bringing up secondary CPUs ... [ 0.688494] smpboot: x86: Booting SMP configuration: [ 0.689418] .... node #0, CPUs: #1 #2 #3 [ 0.728427] smp: Brought up 1 node, 4 CPUs [ 0.730347] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 0.730719] Memory: 5081828K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134060K reserved, 0K cma-reserved) [ 0.731505] devtmpfs: initialized [ 0.732502] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.733416] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.734450] pinctrl core: initialized pinctrl subsystem [ 0.736588] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.737527] thermal_sys: Registered thermal governor 'step_wise' [ 0.737538] thermal_sys: Registered thermal governor 'user_space' [ 0.738430] cpuidle: using governor menu [ 0.740589] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.741414] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.742421] PCI: Using configuration type 1 for base access [ 0.743461] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.782823] raid6: sse2x4 gen() 11978 MB/s [ 0.801391] raid6: sse2x2 gen() 11831 MB/s [ 0.817435] raid6: sse2x1 gen() 5383 MB/s [ 0.819413] raid6: using algorithm sse2x4 gen() 11978 MB/s [ 0.837279] raid6: .... xor() 2391 MB/s, rmw enabled [ 0.838414] raid6: using ssse3x2 recovery algorithm [ 0.839514] ACPI: Added _OSI(Module Device) [ 0.840413] ACPI: Added _OSI(Processor Device) [ 0.841412] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.842412] ACPI: Added _OSI(Processor Aggregator Device) [ 0.844156] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.847526] ACPI: Interpreter enabled [ 0.848426] ACPI: PM: (supports S0 S3 S5) [ 0.849344] ACPI: Using IOAPIC for interrupt routing [ 0.850436] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.852413] PCI: Using E820 reservations for host bridge windows [ 0.853485] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.867641] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.869418] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.871444] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.872444] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.873462] PCI host bridge to bus 0000:00 [ 0.874196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.875412] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.876412] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.878413] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 0.879413] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.881415] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 0.882414] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.883484] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.886080] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.891413] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 0.894413] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 0.901414] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 0.905414] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 0.907318] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.911414] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 0.914413] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 0.921413] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 0.925028] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.927923] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 0.931446] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 0.934439] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 0.938439] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 0.941500] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.944095] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.948414] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 0.951206] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 0.957413] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 0.961614] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 0.964994] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 0.967123] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 0.969884] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 0.972553] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 0.977004] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 0.979297] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 0.980765] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 0.984374] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.986875] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.987642] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.991878] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 0.993986] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 0.997598] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.000830] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.002532] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.006504] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.007481] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.008461] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.009469] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.010467] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.011461] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.013457] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.014432] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.015427] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.016422] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.017425] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.019419] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.020422] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.021420] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.022419] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.023713] iommu: Default domain type: Translated [ 1.024412] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.026498] SCSI subsystem initialized [ 1.027169] ACPI: bus type USB registered [ 1.027428] usbcore: registered new interface driver usbfs [ 1.028419] usbcore: registered new interface driver hub [ 1.029419] usbcore: registered new device driver usb [ 1.030425] pps_core: LinuxPPS API ver. 1 registered [ 1.031412] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.034414] PTP clock support registered [ 1.035626] Bluetooth: Core ver 2.22 [ 1.036419] NET: Registered PF_BLUETOOTH protocol family [ 1.037412] Bluetooth: HCI device and connection manager initialized [ 1.039414] Bluetooth: HCI socket layer initialized [ 1.040413] Bluetooth: L2CAP socket layer initialized [ 1.041414] Bluetooth: SCO socket layer initialized [ 1.056447] PCI: Using ACPI for IRQ routing [ 1.122436] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.123408] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.123408] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.127423] vgaarb: loaded [ 1.128086] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.128413] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.133463] clocksource: Switched to clocksource kvm-clock [ 1.150840] pnp: PnP ACPI init [ 1.151714] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.154334] pnp: PnP ACPI: found 5 devices [ 1.162793] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.164836] NET: Registered PF_INET protocol family [ 1.166008] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.168784] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.170735] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.172495] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.175267] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.177338] TCP: Hash tables configured (established 65536 bind 65536) [ 1.178834] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.180401] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.182003] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.184037] RPC: Registered named UNIX socket transport module. [ 1.185460] RPC: Registered udp transport module. [ 1.186521] RPC: Registered tcp transport module. [ 1.187589] RPC: Registered tcp-with-tls transport module. [ 1.188834] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.190319] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.191710] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.193123] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.194665] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.196205] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.197733] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.199534] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.201177] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.202710] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.204216] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.205843] PCI: CLS 0 bytes, default 64 [ 1.206804] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.208268] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.210055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 1.212965] Initialise system trusted keyrings [ 1.214510] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.215870] NFS: Registering the id_resolver key type [ 1.216800] Key type id_resolver registered [ 1.217553] Key type id_legacy registered [ 1.230591] Key type cifs.idmap registered [ 1.240511] xor: automatically using best checksumming function avx [ 1.241784] Key type asymmetric registered [ 1.242509] Asymmetric key parser 'x509' registered [ 1.243959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.245356] io scheduler mq-deadline registered [ 1.246162] io scheduler kyber registered [ 1.246870] io scheduler bfq registered [ 1.247816] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.252749] ACPI: button: Power Button [PWRF] [ 1.254220] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.256482] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.258728] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.264736] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.266900] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.268454] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.270168] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.272486] Linux agpgart interface v0.103 [ 1.274264] ACPI: bus type drm_connector registered [ 1.275429] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.276666] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.280950] Console: switching to colour dummy device 80x25 [ 1.282396] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.282398] [drm] features: -context_init [ 1.285369] [drm] number of scanouts: 1 [ 1.286245] [drm] number of cap sets: 0 [ 1.287422] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.290096] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.308252] Console: switching to colour frame buffer device 160x50 [ 1.328338] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.382529] brd: module loaded [ 1.396615] loop: module loaded [ 1.397546] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.399969] virtio_blk virtio3: [vda] 788192 512-byte logical blocks (404 MB/385 MiB) [ 1.403397] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.405284] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.406736] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.424865] scsi host0: ahci [ 1.425632] scsi host1: ahci [ 1.426422] scsi host2: ahci [ 1.427169] scsi host3: ahci [ 1.427922] scsi host4: ahci [ 1.428653] scsi host5: ahci [ 1.429330] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.431018] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.432822] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.434594] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.436362] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.438134] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.441595] e100: Intel(R) PRO/100 Network Driver [ 1.442888] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.444167] e1000: Intel(R) PRO/1000 Network Driver [ 1.445247] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.446586] e1000e: Intel(R) PRO/1000 Network Driver [ 1.447585] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.448680] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.449698] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.452327] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.453530] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.455258] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.476495] hub 1-0:1.0: USB hub found [ 1.477366] hub 1-0:1.0: 2 ports detected [ 1.478475] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.479940] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.481749] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.488697] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.490101] hub 2-0:1.0: USB hub found [ 1.490922] hub 2-0:1.0: 6 ports detected [ 1.512857] hub 1-0:1.0: USB hub found [ 1.513712] hub 1-0:1.0: 2 ports detected [ 1.514596] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.515441] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.516734] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.517937] hub 3-0:1.0: USB hub found [ 1.518645] hub 3-0:1.0: 2 ports detected [ 1.520131] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.521064] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.522618] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.524168] hub 4-0:1.0: USB hub found [ 1.525018] hub 4-0:1.0: 2 ports detected [ 1.526032] usbcore: registered new interface driver usb-storage [ 1.527369] usbcore: registered new interface driver usbserial_generic [ 1.528877] usbserial: USB Serial support registered for generic [ 1.530211] usbcore: registered new interface driver ftdi_sio [ 1.531458] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.533036] usbcore: registered new interface driver pl2303 [ 1.534269] usbserial: USB Serial support registered for pl2303 [ 1.535572] i8042: PNP: No PS/2 controller found. [ 1.536672] mousedev: PS/2 mouse device common for all mice [ 1.537991] rtc_cmos 00:03: RTC can wake from S4 [ 1.539592] rtc_cmos 00:03: registered as rtc0 [ 1.540642] rtc_cmos 00:03: setting system clock to 2025-07-06T17:24:39 UTC (1751822679) [ 1.542425] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.544356] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.544402] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.545749] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.547624] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.550777] sdhci: Secure Digital Host Controller Interface driver [ 1.552135] sdhci: Copyright(c) Pierre Ossman [ 1.553125] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.555904] usbcore: registered new interface driver usbhid [ 1.557143] usbhid: USB HID core driver [ 1.557990] u32 classifier [ 1.558578] input device check on [ 1.559408] Actions configured [ 1.560233] NET: Registered PF_INET6 protocol family [ 1.561590] Segment Routing with IPv6 [ 1.562423] In-situ OAM (IOAM) with IPv6 [ 1.563392] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.564782] NET: Registered PF_PACKET protocol family [ 1.565873] Bridge firewalling registered [ 1.566758] l2tp_core: L2TP core driver, V2.0 [ 1.567712] Key type dns_resolver registered [ 1.568722] NET: Registered PF_VSOCK protocol family [ 1.570148] IPI shorthand broadcast: enabled [ 1.572251] sched_clock: Marking stable (1403002027, 168658496)->(1610460751, -38800228) [ 1.574041] registered taskstats version 1 [ 1.574994] Loading compiled-in X.509 certificates [ 1.577006] Key type .fscrypt registered [ 1.577865] Key type fscrypt-provisioning registered [ 1.637128] Btrfs loaded, zoned=no, fsverity=no [ 1.638426] Key type encrypted registered [ 1.639254] printk: legacy console [netcon0] enabled [ 1.640170] netconsole: network logging started [ 1.748699] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.769987] ata2: SATA link down (SStatus 0 SControl 300) [ 1.771357] ata6: SATA link down (SStatus 0 SControl 300) [ 1.772806] ata1: SATA link down (SStatus 0 SControl 300) [ 1.774289] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.775567] ata5: SATA link down (SStatus 0 SControl 300) [ 1.776696] ata4: SATA link down (SStatus 0 SControl 300) [ 1.777934] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.778985] ata3.00: applying bridge limits [ 1.779838] ata3.00: configured for UDMA/100 [ 1.780889] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.808891] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.810248] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.831668] IP-Config: Complete: [ 1.832294] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.834089] host=192.168.7.2, domain=, nis-domain=(none) [ 1.835133] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.835134] nameserver0=8.8.8.8 [ 1.837178] clk: Disabling unused clocks [ 1.838208] md: Waiting for all devices to be available before autodetect [ 1.839192] md: If you don't use raid, use raid=noautodetect [ 1.839985] md: Autodetecting RAID arrays. [ 1.840665] md: autorun ... [ 1.841116] md: ... autorun DONE. [ 1.846626] EXT4-fs (vda): mounted filesystem 83735fe5-1048-4c81-acd5-9ba357886608 r/w with ordered data mode. Quota mode: disabled. [ 1.848910] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.850137] devtmpfs: mounted [ 1.851766] Freeing unused kernel image (initmem) memory: 3528K [ 1.852940] Write protecting the kernel read-only data: 26624k [ 1.854366] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.855606] Run /sbin/init as init process INIT: version 3.14 booting [ 1.883805] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.885839] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 1.957020] udevd[138]: starting version 3.2.14 [ 1.960563] udevd[139]: starting eudev-3.2.14 [ 1.999945] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 2.131123] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.184185] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.241925] EXT4-fs (vda): re-mounted 83735fe5-1048-4c81-acd5-9ba357886608. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-352a526545d368f29fc02f14649025374e5fb2b8 qemux86-64 /dev/ttyS0 qemux86-64 login: