[    0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun  5 02:14:18 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 389662441 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000891] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000921] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000924] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002798] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002947] ACPI: Early table checksum verification disabled
[    0.002948] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS )
[    0.002953] ACPI: RSDT 0x000000001FFE248C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002957] ACPI: FACP 0x000000001FFE226C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002960] ACPI: DSDT 0x000000001FFE0040 00222C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002962] ACPI: FACS 0x000000001FFE0000 000040
[    0.002963] ACPI: APIC 0x000000001FFE2360 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002964] ACPI: HPET 0x000000001FFE23F0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002966] ACPI: MCFG 0x000000001FFE2428 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002967] ACPI: WAET 0x000000001FFE2464 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002968] ACPI: Reserving FACP table memory at [mem 0x1ffe226c-0x1ffe235f]
[    0.002969] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe226b]
[    0.002970] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002970] ACPI: Reserving APIC table memory at [mem 0x1ffe2360-0x1ffe23ef]
[    0.002971] ACPI: Reserving HPET table memory at [mem 0x1ffe23f0-0x1ffe2427]
[    0.002971] ACPI: Reserving MCFG table memory at [mem 0x1ffe2428-0x1ffe2463]
[    0.002972] ACPI: Reserving WAET table memory at [mem 0x1ffe2464-0x1ffe248b]
[    0.002998] Zone ranges:
[    0.002998]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002999]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.003000]   Normal   empty
[    0.003001] Movable zone start for each node
[    0.003001] Early memory node ranges
[    0.003001]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.003002]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.003003] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003111] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003131] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.004060] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004410] ACPI: PM-Timer IO Port: 0x608
[    0.004417] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004439] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004441] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004442] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004443] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004444] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004444] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004446] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004447] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004448] TSC deadline timer available
[    0.004452] CPU topo: Max. logical packages:   1
[    0.004452] CPU topo: Max. logical dies:       1
[    0.004452] CPU topo: Max. dies per package:   1
[    0.004455] CPU topo: Max. threads per core:   1
[    0.004456] CPU topo: Num. cores per package:     4
[    0.004456] CPU topo: Num. threads per package:   4
[    0.004456] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004465] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004475] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004476] Booting paravirtualized kernel on KVM
[    0.004477] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004480] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004648] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288
[    0.004669] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004713] random: crng init done
[    0.004727] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004736] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004759] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.004922] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005349] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005361] ftrace: allocating 54089 entries in 212 pages
[    0.013922] ftrace: allocated 212 pages with 4 groups
[    0.013945] Dynamic Preempt: full
[    0.014062] rcu: Preemptible hierarchical RCU implementation.
[    0.014063] rcu: 	RCU event tracing is enabled.
[    0.014063] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014064] 	All grace periods are expedited (rcu_expedited).
[    0.014065] 	Trampoline variant of Tasks RCU enabled.
[    0.014065] 	Rude variant of Tasks RCU enabled.
[    0.014065] 	Tracing variant of Tasks RCU enabled.
[    0.014066] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014066] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014069] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014070] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014071] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.018695] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.018872] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.018926] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.023511] Console: colour VGA+ 80x25
[    0.023547] printk: legacy console [ttyS0] enabled
[    0.144796] ACPI: Core revision 20240827
[    0.145556] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.147254] APIC: Switch to symmetric I/O mode setup
[    0.148275] x2apic enabled
[    0.148985] APIC: Switched APIC routing to: physical x2apic
[    0.151828] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.152916] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.154762] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.156873] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.157761] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.157765] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.158764] Spectre V2 : Mitigation: Retpolines
[    0.159762] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.160763] Speculative Store Bypass: Vulnerable
[    0.161774] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.162762] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.163762] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.164762] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.165762] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.184517] Freeing SMP alternatives memory: 56K
[    0.184764] pid_max: default: 32768 minimum: 301
[    0.185773] LSM: initializing lsm=capability,landlock
[    0.186785] landlock: Up and running.
[    0.187413] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.187763] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.188931] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.189870] Performance Events: AMD PMU driver.
[    0.190657] ... version:                0
[    0.190765] ... bit width:              48
[    0.191470] ... generic registers:      4
[    0.191764] ... value mask:             0000ffffffffffff
[    0.192691] ... max period:             00007fffffffffff
[    0.192765] ... fixed-purpose events:   0
[    0.193474] ... event mask:             000000000000000f
[    0.193835] signal: max sigframe size: 1776
[    0.194546] rcu: Hierarchical SRCU implementation.
[    0.194765] rcu: 	Max phase no-delay instances is 400.
[    0.195678] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.195892] smp: Bringing up secondary CPUs ...
[    0.196723] smpboot: x86: Booting SMP configuration:
[    0.196767] .... node  #0, CPUs:      #1 #2 #3
[    0.231807] smp: Brought up 1 node, 4 CPUs
[    0.233466] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.234243] Memory: 471748K/523736K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 47760K reserved, 0K cma-reserved)
[    0.235015] devtmpfs: initialized
[    0.235854] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.236767] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.237804] pinctrl core: initialized pinctrl subsystem
[    0.239705] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.239844] thermal_sys: Registered thermal governor 'step_wise'
[    0.239845] thermal_sys: Registered thermal governor 'user_space'
[    0.240775] cpuidle: using governor menu
[    0.242591] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.242768] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.243771] PCI: Using configuration type 1 for base access
[    0.244782] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.262765] raid6: sse2x4   gen() 24202 MB/s
[    0.279765] raid6: sse2x2   gen() 25961 MB/s
[    0.297764] raid6: sse2x1   gen()  9171 MB/s
[    0.298511] raid6: using algorithm sse2x2 gen() 25961 MB/s
[    0.315765] raid6: .... xor() 19664 MB/s, rmw enabled
[    0.316648] raid6: using ssse3x2 recovery algorithm
[    0.316836] ACPI: Added _OSI(Module Device)
[    0.317572] ACPI: Added _OSI(Processor Device)
[    0.317765] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.318593] ACPI: Added _OSI(Processor Aggregator Device)
[    0.319161] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.320830] ACPI: Interpreter enabled
[    0.321484] ACPI: PM: (supports S0 S3 S5)
[    0.321767] ACPI: Using IOAPIC for interrupt routing
[    0.322674] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.322765] PCI: Using E820 reservations for host bridge windows
[    0.323807] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.325611] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.325768] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.326786] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.327794] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.328800] PCI host bridge to bus 0000:00
[    0.329501] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.329766] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.330764] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.331765] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.332765] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.333765] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.334764] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.335752] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.336198] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.337765] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.339497] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.342422] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.343765] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.345280] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.348765] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.350304] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.353277] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.356832] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.358765] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.361766] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.363765] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.366766] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.367809] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.369334] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.370766] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.372765] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.376765] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.380930] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.383341] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.384515] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.386967] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.388461] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.390251] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.391488] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.392095] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.395572] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.396144] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.396960] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.400765] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.402377] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.403586] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.405194] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.406542] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.406813] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.407825] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.408810] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.409810] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.410808] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.411807] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.412808] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.413784] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.414768] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.415768] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.416768] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.417769] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.418768] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.419770] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.420767] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.421957] iommu: Default domain type: Translated
[    0.422765] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.423803] SCSI subsystem initialized
[    0.424468] ACPI: bus type USB registered
[    0.424776] usbcore: registered new interface driver usbfs
[    0.425708] usbcore: registered new interface driver hub
[    0.425768] usbcore: registered new device driver usb
[    0.426603] pps_core: LinuxPPS API ver. 1 registered
[    0.426765] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.427767] PTP clock support registered
[    0.428800] Bluetooth: Core ver 2.22
[    0.429446] NET: Registered PF_BLUETOOTH protocol family
[    0.429765] Bluetooth: HCI device and connection manager initialized
[    0.430765] Bluetooth: HCI socket layer initialized
[    0.431572] Bluetooth: L2CAP socket layer initialized
[    0.431766] Bluetooth: SCO socket layer initialized
[    0.432613] PCI: Using ACPI for IRQ routing
[    0.483166] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.483761] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.483761] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.483768] vgaarb: loaded
[    0.484316] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.484764] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.488813] clocksource: Switched to clocksource kvm-clock
[    0.489814] pnp: PnP ACPI init
[    0.491339] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.492681] pnp: PnP ACPI: found 5 devices
[    0.501427] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.502963] NET: Registered PF_INET protocol family
[    0.503822] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.505180] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.506610] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.507912] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.509237] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.510457] TCP: Hash tables configured (established 4096 bind 4096)
[    0.511544] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.512711] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.513907] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.515176] RPC: Registered named UNIX socket transport module.
[    0.516193] RPC: Registered udp transport module.
[    0.516978] RPC: Registered tcp transport module.
[    0.517778] RPC: Registered tcp-with-tls transport module.
[    0.518725] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.519822] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.521755] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.522803] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.523956] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.525975] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.527318] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.528865] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.530208] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.531420] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.532639] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.533980] PCI: CLS 0 bytes, default 64
[    0.534738] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.537651] Initialise system trusted keyrings
[    0.538584] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.539836] NFS: Registering the id_resolver key type
[    0.540704] Key type id_resolver registered
[    0.541449] Key type id_legacy registered
[    0.542526] Key type cifs.idmap registered
[    0.550362] xor: automatically using best checksumming function   avx       
[    0.552228] Key type asymmetric registered
[    0.552912] Asymmetric key parser 'x509' registered
[    0.553760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.555021] io scheduler mq-deadline registered
[    0.555808] io scheduler kyber registered
[    0.556515] io scheduler bfq registered
[    0.557486] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.561917] ACPI: button: Power Button [PWRF]
[    0.563257] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.564989] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.566697] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.572868] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.574689] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.575924] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.577371] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.579706] Linux agpgart interface v0.103
[    0.581405] ACPI: bus type drm_connector registered
[    0.582329] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.583271] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.586475] Console: switching to colour dummy device 80x25
[    0.587691] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.587692] [drm] features: -context_init
[    0.590181] [drm] number of scanouts: 1
[    0.590898] [drm] number of cap sets: 0
[    0.592189] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.594178] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.626154] Console: switching to colour frame buffer device 160x50
[    0.644139] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.650612] brd: module loaded
[    0.653183] loop: module loaded
[    0.654848] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.659605] virtio_blk virtio3: [vda] 1195162 512-byte logical blocks (612 MB/584 MiB)
[    0.666868] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.670512] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.673369] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.677369] scsi host0: ahci
[    0.679055] scsi host1: ahci
[    0.680627] scsi host2: ahci
[    0.682218] scsi host3: ahci
[    0.683832] scsi host4: ahci
[    0.685396] scsi host5: ahci
[    0.686736] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.690335] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.693950] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.697593] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.701210] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.704792] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.711017] e100: Intel(R) PRO/100 Network Driver
[    0.713236] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.715666] e1000: Intel(R) PRO/1000 Network Driver
[    0.717841] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.720376] e1000e: Intel(R) PRO/1000 Network Driver
[    0.722589] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.725223] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.727581] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.732418] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.734789] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.738452] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.746959] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.749780] hub 1-0:1.0: USB hub found
[    0.751500] hub 1-0:1.0: 6 ports detected
[    0.753570] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.755915] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.759374] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.762157] hub 2-0:1.0: USB hub found
[    0.763901] hub 2-0:1.0: 2 ports detected
[    0.767146] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.769562] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.773189] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.776024] hub 3-0:1.0: USB hub found
[    0.777761] hub 3-0:1.0: 2 ports detected
[    0.780964] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.783636] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.787090] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.789878] hub 4-0:1.0: USB hub found
[    0.791568] hub 4-0:1.0: 2 ports detected
[    0.793557] usbcore: registered new interface driver usb-storage
[    0.796448] usbcore: registered new interface driver usbserial_generic
[    0.799362] usbserial: USB Serial support registered for generic
[    0.801996] usbcore: registered new interface driver ftdi_sio
[    0.804543] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.807773] usbcore: registered new interface driver pl2303
[    0.810256] usbserial: USB Serial support registered for pl2303
[    0.812865] i8042: PNP: No PS/2 controller found.
[    0.814998] mousedev: PS/2 mouse device common for all mice
[    0.817670] rtc_cmos 00:03: RTC can wake from S4
[    0.820705] rtc_cmos 00:03: registered as rtc0
[    0.822845] rtc_cmos 00:03: setting system clock to 2025-07-07T23:07:28 UTC (1751929648)
[    0.826503] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.830180] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.830453] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.834248] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.836932] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.840471] sdhci: Secure Digital Host Controller Interface driver
[    0.846613] sdhci: Copyright(c) Pierre Ossman
[    0.848666] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.851475] usbcore: registered new interface driver usbhid
[    0.854070] usbhid: USB HID core driver
[    0.855872] u32 classifier
[    0.857170]     input device check on
[    0.858902]     Actions configured
[    0.860584] NET: Registered PF_INET6 protocol family
[    0.863448] Segment Routing with IPv6
[    0.865199] In-situ OAM (IOAM) with IPv6
[    0.867027] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.871939] NET: Registered PF_PACKET protocol family
[    0.874308] Bridge firewalling registered
[    0.876174] l2tp_core: L2TP core driver, V2.0
[    0.878212] Key type dns_resolver registered
[    0.880306] NET: Registered PF_VSOCK protocol family
[    0.883190] IPI shorthand broadcast: enabled
[    0.887409] sched_clock: Marking stable (755005944, 131884028)->(968034205, -81144233)
[    0.891203] registered taskstats version 1
[    0.893100] Loading compiled-in X.509 certificates
[    0.896959] Key type .fscrypt registered
[    0.898799] Key type fscrypt-provisioning registered
[    0.901473] Btrfs loaded, zoned=no, fsverity=no
[    0.904500] Key type encrypted registered
[    0.906550] printk: legacy console [netcon0] enabled
[    0.908859] netconsole: network logging started
[    0.991936] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.020135] ata1: SATA link down (SStatus 0 SControl 300)
[    1.022920] ata2: SATA link down (SStatus 0 SControl 300)
[    1.025635] ata6: SATA link down (SStatus 0 SControl 300)
[    1.028316] ata5: SATA link down (SStatus 0 SControl 300)
[    1.031117] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.034141] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.036707] ata3.00: applying bridge limits
[    1.038937] ata4: SATA link down (SStatus 0 SControl 300)
[    1.041470] ata3.00: configured for UDMA/100
[    1.043947] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.071239] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.074198] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.097909] IP-Config: Complete:
[    1.099483]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.104036]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.106669]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.106672]      nameserver0=8.8.8.8
[    1.112175] clk: Disabling unused clocks
[    1.114549] md: Waiting for all devices to be available before autodetect
[    1.117018] md: If you don't use raid, use raid=noautodetect
[    1.119108] md: Autodetecting RAID arrays.
[    1.120629] md: autorun ...
[    1.123742] md: ... autorun DONE.
[    1.129520] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.130511] EXT4-fs (vda): mounted filesystem b3395b45-f73b-4787-a1fe-6cffd8edd9a6 r/w with ordered data mode. Quota mode: disabled.
[    1.134186] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.138289] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.144809] devtmpfs: mounted
[    1.147144] Freeing unused kernel image (initmem) memory: 3528K
[    1.149289] Write protecting the kernel read-only data: 26624k
[    1.151664] Freeing unused kernel image (rodata/data gap) memory: 284K
[    1.153994] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.224728] udevd[150]: starting version 3.2.14
[    1.233286] udevd[151]: starting eudev-3.2.14
[    1.255275] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.392719] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.448656] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.515400] EXT4-fs (vda): re-mounted b3395b45-f73b-4787-a1fe-6cffd8edd9a6.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.122 [1;34m [seatd/server.c:145] New client connected (pid: 353, uid: 1000, gid: 1000)[0m
00:00:00.122 [1;34m [seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.122 [1;34m [seatd/seat.c:563] Opened client 2 on seat0[0m
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCRH87a16oBII00GUXb7I0QBx2JaAl5Rnd37mc6pxog+Z0VKRGJnvtU0j6lc+5bliOnvduCTx8OImA6MyKkXH5Uy4/EUhiXEpvCKre4L9nx1ou+hZVb2bh/V2UlHjvUUExo9mKCl31JjXJNiakK8I79ObHIs2suml7kVpmEzjKLAygYldrjNUeZa/UfQgZPk40YhKsp307bdlK3IhhQRzRY9ICBPi3W0yAdFJpJ5zfCQbRAiZ5EKJ11a5EDQE2dnRfWg23OHbdHrIi1DPG5/Hoh1+8SQWk2Fe85vcqNAHoUMUuclztq5G/rXCbiHTnaAv5b2fQXgdigyHTeAU3kQMjX root@qemux86-64
Fingerprint: SHA256:pflqHG8mQP7xrX66iHxunHsW45+Z/SQIUbzfhgMIR9c
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    1.996943] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.999680] Bluetooth: BNEP filters: protocol multicast
[    2.002227] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.2.99+snapshot-b9212df42d187e6e0760fb65446818875b889210 qemux86-64 /dev/ttyS0

qemux86-64 login: could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
00:01:13.711 [1;34m [seatd/server.c:145] New client connected (pid: 5911, uid: 0, gid: 0)[0m
00:01:13.715 [1;31m [seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:13.719 [1;31m [seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
