[    0.000000] Linux version 6.12.31-rt6-yocto-preempt-rt (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_RT Thu Jun  5 02:14:29 UTC 2025
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 390963540 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000878] last_pfn = 0xffd8 max_arch_pfn = 0x400000000
[    0.000909] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000911] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002771] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002935] ACPI: Early table checksum verification disabled
[    0.002937] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS )
[    0.002942] ACPI: RSDT 0x000000000FFE248C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002945] ACPI: FACP 0x000000000FFE226C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002948] ACPI: DSDT 0x000000000FFE0040 00222C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002950] ACPI: FACS 0x000000000FFE0000 000040
[    0.002951] ACPI: APIC 0x000000000FFE2360 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002953] ACPI: HPET 0x000000000FFE23F0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002954] ACPI: MCFG 0x000000000FFE2428 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002956] ACPI: WAET 0x000000000FFE2464 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002957] ACPI: Reserving FACP table memory at [mem 0xffe226c-0xffe235f]
[    0.002958] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe226b]
[    0.002958] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f]
[    0.002959] ACPI: Reserving APIC table memory at [mem 0xffe2360-0xffe23ef]
[    0.002959] ACPI: Reserving HPET table memory at [mem 0xffe23f0-0xffe2427]
[    0.002960] ACPI: Reserving MCFG table memory at [mem 0xffe2428-0xffe2463]
[    0.002960] ACPI: Reserving WAET table memory at [mem 0xffe2464-0xffe248b]
[    0.002989] Zone ranges:
[    0.002989]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002990]   DMA32    [mem 0x0000000001000000-0x000000000ffd7fff]
[    0.002991]   Normal   empty
[    0.002991] Movable zone start for each node
[    0.002992] Early memory node ranges
[    0.002992]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002993]   node   0: [mem 0x0000000000100000-0x000000000ffd7fff]
[    0.002994] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff]
[    0.003091] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003111] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003506] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004935] ACPI: PM-Timer IO Port: 0x608
[    0.004945] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004967] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004969] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004970] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004971] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004972] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004972] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004974] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004975] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004977] TSC deadline timer available
[    0.004980] CPU topo: Max. logical packages:   1
[    0.004981] CPU topo: Max. logical dies:       1
[    0.004981] CPU topo: Max. dies per package:   1
[    0.004984] CPU topo: Max. threads per core:   1
[    0.004985] CPU topo: Num. cores per package:     4
[    0.004985] CPU topo: Num. threads per package:   4
[    0.004985] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004995] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.005006] [mem 0x10000000-0xafffffff] available for PCI devices
[    0.005007] Booting paravirtualized kernel on KVM
[    0.005008] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.005011] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.005175] percpu: Embedded 57 pages/cpu s194288 r8192 d30992 u524288
[    0.005195] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.005238] random: crng init done
[    0.005246] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.005251] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.005274] Built 1 zonelists, mobility grouping on.  Total pages: 65398
[    0.005275] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005578] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.005594] ftrace: allocating 49316 entries in 193 pages
[    0.012843] ftrace: allocated 193 pages with 3 groups
[    0.012868] Dynamic Preempt: full
[    0.012984] rcu: Preemptible hierarchical RCU implementation.
[    0.012984] rcu: 	RCU event tracing is enabled.
[    0.012984] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.012985] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.012986] rcu: 	RCU_SOFTIRQ processing moved to rcuc kthreads.
[    0.012986] 	No expedited grace period (rcu_normal_after_boot).
[    0.012986] 	Trampoline variant of Tasks RCU enabled.
[    0.012987] 	Rude variant of Tasks RCU enabled.
[    0.012987] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.012987] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.012991] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.012992] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.017642] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.017819] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.022090] Console: colour VGA+ 80x25
[    0.022125] printk: console [ttyS0] enabled
[    0.137595] ACPI: Core revision 20240827
[    0.138356] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.139903] APIC: Switch to symmetric I/O mode setup
[    0.140873] x2apic enabled
[    0.141572] APIC: Switched APIC routing to: physical x2apic
[    0.143396] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.144416] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.146172] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.147296] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.148172] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.149174] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.150173] Spectre V2 : Mitigation: Retpolines
[    0.150906] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.151172] Speculative Store Bypass: Vulnerable
[    0.151938] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.152172] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.153172] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.154173] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.155172] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.171707] Freeing SMP alternatives memory: 48K
[    0.172175] pid_max: default: 32768 minimum: 301
[    0.173185] LSM: initializing lsm=capability
[    0.173907] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.174172] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.175337] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.176273] Performance Events: AMD PMU driver.
[    0.177051] ... version:                0
[    0.177175] ... bit width:              48
[    0.178174] ... generic registers:      4
[    0.178834] ... value mask:             0000ffffffffffff
[    0.179174] ... max period:             00007fffffffffff
[    0.180041] ... fixed-purpose events:   0
[    0.180174] ... event mask:             000000000000000f
[    0.181119] signal: max sigframe size: 1776
[    0.181209] rcu: Hierarchical SRCU implementation.
[    0.181212] rcu: 	Max phase no-delay instances is 400.
[    0.181247] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.184380] smp: Bringing up secondary CPUs ...
[    0.185239] smpboot: x86: Booting SMP configuration:
[    0.186091] .... node  #0, CPUs:      #1 #2 #3
[    0.221245] smp: Brought up 1 node, 4 CPUs
[    0.222980] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.224205] Memory: 215552K/261592K available (18432K kernel code, 2288K rwdata, 6292K rodata, 3308K init, 2416K bss, 40932K reserved, 0K cma-reserved)
[    0.225297] devtmpfs: initialized
[    0.225495] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.225495] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.225495] pinctrl core: initialized pinctrl subsystem
[    0.225495] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.226241] thermal_sys: Registered thermal governor 'step_wise'
[    0.226242] thermal_sys: Registered thermal governor 'user_space'
[    0.226484] cpuidle: using governor menu
[    0.227195] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.227201] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.227213] PCI: Using configuration type 1 for base access
[    0.227779] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.245021] raid6: sse2x4   gen() 10204 MB/s
[    0.261984] raid6: sse2x2   gen() 11501 MB/s
[    0.278976] raid6: sse2x1   gen()  5895 MB/s
[    0.279001] raid6: using algorithm sse2x2 gen() 11501 MB/s
[    0.295984] raid6: .... xor() 8132 MB/s, rmw enabled
[    0.296001] raid6: using ssse3x2 recovery algorithm
[    0.296080] ACPI: Added _OSI(Module Device)
[    0.296081] ACPI: Added _OSI(Processor Device)
[    0.296082] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.296083] ACPI: Added _OSI(Processor Aggregator Device)
[    0.297194] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.298802] ACPI: Interpreter enabled
[    0.298802] ACPI: PM: (supports S0 S3 S5)
[    0.298802] ACPI: Using IOAPIC for interrupt routing
[    0.298802] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.298802] PCI: Using E820 reservations for host bridge windows
[    0.299233] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.300979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.300984] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.301007] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.301038] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.301073] PCI host bridge to bus 0000:00
[    0.301074] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.301076] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.301076] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.301077] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window]
[    0.301078] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.301078] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.301079] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.301204] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.302434] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.303939] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.304924] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.309663] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.310781] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.312288] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.313175] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.314175] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.319175] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.322106] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.323176] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.325176] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.326175] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.329176] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.329296] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.330729] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.331788] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.332797] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.335882] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.339424] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.341368] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.342287] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.344093] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.345051] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.346906] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.349223] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.349776] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.351977] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.353091] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.353584] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.356175] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.356823] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.357967] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.360707] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.361796] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.361905] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.362016] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.362127] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.362212] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.362323] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.362472] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.362572] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.362613] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.362617] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.362620] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.362624] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.362627] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.362631] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.362634] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.362637] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.362927] iommu: Default domain type: Translated
[    0.362928] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.362977] SCSI subsystem initialized
[    0.362991] ACPI: bus type USB registered
[    0.362991] usbcore: registered new interface driver usbfs
[    0.362991] usbcore: registered new interface driver hub
[    0.362991] usbcore: registered new device driver usb
[    0.362991] pps_core: LinuxPPS API ver. 1 registered
[    0.362991] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.362991] PTP clock support registered
[    0.364289] Bluetooth: Core ver 2.22
[    0.364293] NET: Registered PF_BLUETOOTH protocol family
[    0.364294] Bluetooth: HCI device and connection manager initialized
[    0.364295] Bluetooth: HCI socket layer initialized
[    0.364296] Bluetooth: L2CAP socket layer initialized
[    0.364298] Bluetooth: SCO socket layer initialized
[    0.364312] PCI: Using ACPI for IRQ routing
[    0.502832] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.502832] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.502832] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.502832] vgaarb: loaded
[    0.502832] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.502832] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.506226] clocksource: Switched to clocksource kvm-clock
[    0.506594] pnp: PnP ACPI init
[    0.506695] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.506918] pnp: PnP ACPI: found 5 devices
[    0.513464] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.513484] NET: Registered PF_INET protocol family
[    0.513507] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.513620] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes, linear)
[    0.513623] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.513624] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.513628] TCP bind hash table entries: 2048 (order: 5, 163840 bytes, linear)
[    0.513750] TCP: Hash tables configured (established 2048 bind 2048)
[    0.513760] UDP hash table entries: 256 (order: 2, 24576 bytes, linear)
[    0.513763] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear)
[    0.513780] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.513928] RPC: Registered named UNIX socket transport module.
[    0.513928] RPC: Registered udp transport module.
[    0.513929] RPC: Registered tcp transport module.
[    0.513929] RPC: Registered tcp-with-tls transport module.
[    0.513929] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.513935] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.513936] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.513937] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.513937] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window]
[    0.513938] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.513939] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.514238] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.514967] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.515613] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.516244] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.517005] PCI: CLS 0 bytes, default 64
[    0.517127] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.528599] Initialise system trusted keyrings
[    0.528672] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.528792] NFS: Registering the id_resolver key type
[    0.528795] Key type id_resolver registered
[    0.528795] Key type id_legacy registered
[    0.535886] xor: automatically using best checksumming function   avx       
[    0.535888] Key type asymmetric registered
[    0.535889] Asymmetric key parser 'x509' registered
[    0.535902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.535902] io scheduler mq-deadline registered
[    0.535904] io scheduler kyber registered
[    0.535910] io scheduler bfq registered
[    0.536461] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.536531] ACPI: button: Power Button [PWRF]
[    0.537297] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.542758] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.548296] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.555677] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.560884] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.561455] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.566324] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.574457] Linux agpgart interface v0.103
[    0.574579] ACPI: bus type drm_connector registered
[    0.574908] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.574913] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.589343] Console: switching to colour dummy device 80x25
[    0.590291] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.590293] [drm] features: -context_init
[    0.593519] [drm] number of scanouts: 1
[    0.593547] [drm] number of cap sets: 0
[    0.593889] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
[    0.595069] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.606565] Console: switching to colour frame buffer device 160x50
[    0.613320] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.624610] brd: module loaded
[    0.625889] loop: module loaded
[    0.626422] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.632427] virtio_blk virtio3: [vda] 721608 512-byte logical blocks (369 MB/352 MiB)
[    0.638100] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.638105] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.638108] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.641998] scsi host0: ahci
[    0.642211] scsi host1: ahci
[    0.642583] scsi host2: ahci
[    0.642766] scsi host3: ahci
[    0.642943] scsi host4: ahci
[    0.643114] scsi host5: ahci
[    0.643177] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.643190] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.643225] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.643265] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.643306] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.643369] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.649194] e100: Intel(R) PRO/100 Network Driver
[    0.649197] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.649214] e1000: Intel(R) PRO/1000 Network Driver
[    0.649215] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.649230] e1000e: Intel(R) PRO/1000 Network Driver
[    0.649230] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.649245] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.649246] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.653495] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.653505] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.654277] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.660443] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.660780] hub 1-0:1.0: USB hub found
[    0.660788] hub 1-0:1.0: 6 ports detected
[    0.661295] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.661305] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.661715] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.662270] hub 2-0:1.0: USB hub found
[    0.662277] hub 2-0:1.0: 2 ports detected
[    0.664174] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.664182] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.665007] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.665381] hub 3-0:1.0: USB hub found
[    0.665387] hub 3-0:1.0: 2 ports detected
[    0.667109] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.667116] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.667629] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.667974] hub 4-0:1.0: USB hub found
[    0.667996] hub 4-0:1.0: 2 ports detected
[    0.668318] usbcore: registered new interface driver usb-storage
[    0.668343] usbcore: registered new interface driver usbserial_generic
[    0.668459] usbserial: USB Serial support registered for generic
[    0.668470] usbcore: registered new interface driver ftdi_sio
[    0.668475] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.668503] usbcore: registered new interface driver pl2303
[    0.668508] usbserial: USB Serial support registered for pl2303
[    0.668536] i8042: PNP: No PS/2 controller found.
[    0.668629] mousedev: PS/2 mouse device common for all mice
[    0.668979] rtc_cmos 00:03: RTC can wake from S4
[    0.671921] rtc_cmos 00:03: registered as rtc0
[    0.672550] rtc_cmos 00:03: setting system clock to 2025-07-07T08:31:33 UTC (1751877093)
[    0.672749] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.672915] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.672987] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.673019] sdhci: Secure Digital Host Controller Interface driver
[    0.673020] sdhci: Copyright(c) Pierre Ossman
[    0.673056] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.673108] usbcore: registered new interface driver usbhid
[    0.673109] usbhid: USB HID core driver
[    0.673125] u32 classifier
[    0.673125]     input device check on
[    0.673125]     Actions configured
[    0.673201] NET: Registered PF_INET6 protocol family
[    0.673453] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.673574] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.673630] Segment Routing with IPv6
[    0.673638] In-situ OAM (IOAM) with IPv6
[    0.673656] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.673794] NET: Registered PF_PACKET protocol family
[    0.673822] Key type dns_resolver registered
[    0.673885] NET: Registered PF_VSOCK protocol family
[    0.675619] IPI shorthand broadcast: enabled
[    0.677718] sched_clock: Marking stable (553003358, 124347293)->(704145143, -26794492)
[    0.677813] registered taskstats version 1
[    0.677816] Loading compiled-in X.509 certificates
[    0.679871] Key type .fscrypt registered
[    0.679872] Key type fscrypt-provisioning registered
[    0.680176] Btrfs loaded, zoned=no, fsverity=no
[    0.680894] Key type encrypted registered
[    0.681008] printk: legacy console [netcon0] enabled
[    0.681056] netconsole: network logging started
[    0.915368] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.948007] ata1: SATA link down (SStatus 0 SControl 300)
[    0.956003] ata4: SATA link down (SStatus 0 SControl 300)
[    0.956714] ata6: SATA link down (SStatus 0 SControl 300)
[    0.957283] ata5: SATA link down (SStatus 0 SControl 300)
[    0.958225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.958659] ata2: SATA link down (SStatus 0 SControl 300)
[    0.958797] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.958803] ata3.00: applying bridge limits
[    0.959026] ata3.00: configured for UDMA/100
[    0.960032] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.989701] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.989723] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.014427] IP-Config: Complete:
[    1.014449]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.014453]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.014454]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.014455]      nameserver0=8.8.8.8
[    1.014515] clk: Disabling unused clocks
[    1.029699] md: Waiting for all devices to be available before autodetect
[    1.029714] md: If you don't use raid, use raid=noautodetect
[    1.029715] md: Autodetecting RAID arrays.
[    1.029716] md: autorun ...
[    1.029717] md: ... autorun DONE.
[    1.039235] EXT4-fs (vda): mounted filesystem a3f6c477-0e46-4a09-95eb-3b266a66c568 r/w with ordered data mode. Quota mode: disabled.
[    1.039270] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.039575] devtmpfs: mounted
[    1.041491] Freeing unused kernel image (initmem) memory: 3308K
[    1.041496] Write protecting the kernel read-only data: 26624k
[    1.042000] Freeing unused kernel image (rodata/data gap) memory: 1900K
[    1.042008] Run /sbin/init as init process
[    1.047237] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.047393] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.154087] udevd[178]: starting version 3.2.14
[    1.161181] udevd[179]: starting eudev-3.2.14
[    1.162381] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.295285] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.393584] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.495441] EXT4-fs (vda): re-mounted a3f6c477-0e46-4a09-95eb-3b266a66c568.
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting OpenBSD Secure Shell server: sshd
  generating ssh ECDSA host key...
done.
Starting rpcbind daemon...done.
Starting NFS common utilities ... statd done
Starting atd: OK
starting nfsd: rpc.nfsd: Unable to request RDMA services: Protocol not supported
[    4.661506] NFSD: Unable to initialize client recovery tracking! (-110)
[    4.661542] NFSD: Is nfsdcld running? If not, enable CONFIG_NFSD_LEGACY_CLIENT_TRACKING.
[    4.661544] NFSD: starting 90-second grace period (net f0000000)
done
starting mountd: done
Starting system log daemon...0
Starting crond: OK

Poky (Yocto Project Reference Distro) 5.2.99+snapshot-625e5277d0695452164b5ce3b2d913cebca8dcba qemux86-64 ttyS0

qemux86-64 login: 