[ 0.000000] Linux version 6.12.31-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44.0.20250429) #1 SMP PREEMPT_DYNAMIC Thu Jun 5 02:14:18 UTC 2025 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff] usable [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] DMI: Memory slots populated: 1/1 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 2435799859 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2749.998 MHz processor [ 0.000981] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000 [ 0.001017] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001076] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000 [ 0.003076] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.030168] ACPI: Early table checksum verification disabled [ 0.030173] ACPI: RSDP 0x00000000000F5240 000014 (v00 BOCHS ) [ 0.030183] ACPI: RSDT 0x000000007FFE248C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.030188] ACPI: FACP 0x000000007FFE226C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.030194] ACPI: DSDT 0x000000007FFE0040 00222C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.030197] ACPI: FACS 0x000000007FFE0000 000040 [ 0.030198] ACPI: APIC 0x000000007FFE2360 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.030200] ACPI: HPET 0x000000007FFE23F0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.030201] ACPI: MCFG 0x000000007FFE2428 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.030203] ACPI: WAET 0x000000007FFE2464 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.030204] ACPI: Reserving FACP table memory at [mem 0x7ffe226c-0x7ffe235f] [ 0.030206] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe226b] [ 0.030206] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f] [ 0.030207] ACPI: Reserving APIC table memory at [mem 0x7ffe2360-0x7ffe23ef] [ 0.030207] ACPI: Reserving HPET table memory at [mem 0x7ffe23f0-0x7ffe2427] [ 0.030208] ACPI: Reserving MCFG table memory at [mem 0x7ffe2428-0x7ffe2463] [ 0.030208] ACPI: Reserving WAET table memory at [mem 0x7ffe2464-0x7ffe248b] [ 0.030268] Zone ranges: [ 0.030269] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.030270] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.030271] Normal [mem 0x0000000100000000-0x00000001bebfffff] [ 0.030272] Movable zone start for each node [ 0.030273] Early memory node ranges [ 0.030273] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.030274] node 0: [mem 0x0000000000100000-0x000000007ffd7fff] [ 0.030275] node 0: [mem 0x0000000100000000-0x00000001bebfffff] [ 0.030276] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff] [ 0.031581] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.031608] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.679781] On node 0, zone Normal: 40 pages in unavailable ranges [ 0.679831] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.680201] ACPI: PM-Timer IO Port: 0x608 [ 0.680212] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.680239] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.680241] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.680243] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.680244] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.680244] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.680245] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.680247] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.680248] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.680252] TSC deadline timer available [ 0.680256] CPU topo: Max. logical packages: 1 [ 0.680257] CPU topo: Max. logical dies: 1 [ 0.680257] CPU topo: Max. dies per package: 1 [ 0.680260] CPU topo: Max. threads per core: 1 [ 0.680261] CPU topo: Num. cores per package: 4 [ 0.680261] CPU topo: Num. threads per package: 4 [ 0.680261] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.680277] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.680292] [mem 0xc0000000-0xfed1bfff] available for PCI devices [ 0.680294] Booting paravirtualized kernel on KVM [ 0.680295] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.680301] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.690294] percpu: Embedded 58 pages/cpu s199768 r8192 d29608 u524288 [ 0.690318] Kernel command line: root=/dev/vda rw ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.690374] random: crng init done [ 0.694244] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.696385] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.696417] Built 1 zonelists, mobility grouping on. Total pages: 1305462 [ 0.697586] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.697590] software IO TLB: area num 4. [ 0.697591] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.703879] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.703899] ftrace: allocating 54089 entries in 212 pages [ 0.713962] ftrace: allocated 212 pages with 4 groups [ 0.713990] Dynamic Preempt: full [ 0.714910] rcu: Preemptible hierarchical RCU implementation. [ 0.714911] rcu: RCU event tracing is enabled. [ 0.714911] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.714912] All grace periods are expedited (rcu_expedited). [ 0.714912] Trampoline variant of Tasks RCU enabled. [ 0.714913] Rude variant of Tasks RCU enabled. [ 0.714913] Tracing variant of Tasks RCU enabled. [ 0.714914] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.714914] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.714919] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.714920] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.714921] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. [ 0.720604] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.720788] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.720854] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.725166] Console: colour VGA+ 80x25 [ 0.725201] printk: legacy console [ttyS0] enabled [ 0.858540] ACPI: Core revision 20240827 [ 0.859285] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.860896] APIC: Switch to symmetric I/O mode setup [ 0.861870] x2apic enabled [ 0.862593] APIC: Switched APIC routing to: physical x2apic [ 0.864452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.865499] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 0.867269] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998) [ 0.868397] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.869270] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.870271] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.871271] Spectre V2 : Mitigation: Retpolines [ 0.872270] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.873270] Speculative Store Bypass: Vulnerable [ 0.874283] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.875270] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.876270] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.877270] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.878270] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.897592] Freeing SMP alternatives memory: 56K [ 0.898272] pid_max: default: 32768 minimum: 301 [ 0.899053] LSM: initializing lsm=capability,landlock [ 0.899297] landlock: Up and running. [ 0.900289] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.901274] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.902446] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.903387] Performance Events: AMD PMU driver. [ 0.904152] ... version: 0 [ 0.904272] ... bit width: 48 [ 0.904987] ... generic registers: 4 [ 0.905272] ... value mask: 0000ffffffffffff [ 0.906146] ... max period: 00007fffffffffff [ 0.906271] ... fixed-purpose events: 0 [ 0.906974] ... event mask: 000000000000000f [ 0.907359] signal: max sigframe size: 1776 [ 0.908107] rcu: Hierarchical SRCU implementation. [ 0.908272] rcu: Max phase no-delay instances is 400. [ 0.909156] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.909398] smp: Bringing up secondary CPUs ... [ 0.910230] smpboot: x86: Booting SMP configuration: [ 0.910274] .... node #0, CPUs: #1 #2 #3 [ 0.950356] smp: Brought up 1 node, 4 CPUs [ 0.951273] smpboot: Total of 4 processors activated (21999.98 BogoMIPS) [ 0.952644] Memory: 5081832K/5221848K available (20480K kernel code, 2446K rwdata, 5860K rodata, 3528K init, 2024K bss, 134056K reserved, 0K cma-reserved) [ 0.953343] devtmpfs: initialized [ 0.953961] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.954275] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.955293] pinctrl core: initialized pinctrl subsystem [ 0.956451] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.957359] thermal_sys: Registered thermal governor 'step_wise' [ 0.957360] thermal_sys: Registered thermal governor 'user_space' [ 0.958280] cpuidle: using governor menu [ 0.960042] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] [ 0.960275] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.961280] PCI: Using configuration type 1 for base access [ 0.962290] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.982272] raid6: sse2x4 gen() 23682 MB/s [ 0.999271] raid6: sse2x2 gen() 26359 MB/s [ 1.016274] raid6: sse2x1 gen() 8260 MB/s [ 1.016994] raid6: using algorithm sse2x2 gen() 26359 MB/s [ 1.034274] raid6: .... xor() 16405 MB/s, rmw enabled [ 1.035274] raid6: using ssse3x2 recovery algorithm [ 1.036349] ACPI: Added _OSI(Module Device) [ 1.037274] ACPI: Added _OSI(Processor Device) [ 1.038274] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.039274] ACPI: Added _OSI(Processor Aggregator Device) [ 1.040960] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.044339] ACPI: Interpreter enabled [ 1.045281] ACPI: PM: (supports S0 S3 S5) [ 1.045974] ACPI: Using IOAPIC for interrupt routing [ 1.046289] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.047272] PCI: Using E820 reservations for host bridge windows [ 1.048313] ACPI: Enabled 2 GPEs in block 00 to 3F [ 1.050043] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.050276] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.051294] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 1.052298] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 1.053308] PCI host bridge to bus 0000:00 [ 1.054017] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.054273] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.055273] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.056272] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window] [ 1.057272] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 1.058272] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window] [ 1.059272] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.060237] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 1.060717] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.062273] pci 0000:00:01.0: BAR 0 [io 0xc0c0-0xc0df] [ 1.063984] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff] [ 1.068272] pci 0000:00:01.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref] [ 1.071124] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref] [ 1.071798] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.073272] pci 0000:00:02.0: BAR 0 [io 0xc0e0-0xc0ff] [ 1.074748] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] [ 1.078216] pci 0000:00:02.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref] [ 1.079622] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 1.081273] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref] [ 1.084273] pci 0000:00:03.0: BAR 2 [mem 0xc000008000-0xc00000bfff 64bit pref] [ 1.087052] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff] [ 1.088725] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref] [ 1.089314] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.090782] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.092273] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] [ 1.094273] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] [ 1.098273] pci 0000:00:04.0: BAR 4 [mem 0xc00000c000-0xc00000ffff 64bit pref] [ 1.101420] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint [ 1.103688] pci 0000:00:1d.0: BAR 4 [io 0xc100-0xc11f] [ 1.104917] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint [ 1.106858] pci 0000:00:1d.1: BAR 4 [io 0xc120-0xc13f] [ 1.108222] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint [ 1.111056] pci 0000:00:1d.2: BAR 4 [io 0xc140-0xc15f] [ 1.111935] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint [ 1.112602] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff] [ 1.114934] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 1.115644] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 1.116447] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 1.120272] pci 0000:00:1f.2: BAR 4 [io 0xc160-0xc17f] [ 1.121545] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff] [ 1.122988] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 1.124675] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] [ 1.126062] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 1.126319] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.127332] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 1.128313] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.129313] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 1.130313] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 1.131313] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 1.132313] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 1.133290] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 1.134275] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 1.135276] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 1.136276] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 1.137275] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 1.138276] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 1.139276] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 1.140275] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 1.141457] iommu: Default domain type: Translated [ 1.142272] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.143313] SCSI subsystem initialized [ 1.143986] ACPI: bus type USB registered [ 1.144282] usbcore: registered new interface driver usbfs [ 1.145275] usbcore: registered new interface driver hub [ 1.146180] usbcore: registered new device driver usb [ 1.146279] pps_core: LinuxPPS API ver. 1 registered [ 1.147097] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.147274] PTP clock support registered [ 1.147962] Bluetooth: Core ver 2.22 [ 1.148276] NET: Registered PF_BLUETOOTH protocol family [ 1.149146] Bluetooth: HCI device and connection manager initialized [ 1.149273] Bluetooth: HCI socket layer initialized [ 1.150083] Bluetooth: L2CAP socket layer initialized [ 1.150274] Bluetooth: SCO socket layer initialized [ 1.151116] PCI: Using ACPI for IRQ routing [ 1.198907] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 1.199269] pci 0000:00:03.0: vgaarb: bridge control possible [ 1.199269] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.199274] vgaarb: loaded [ 1.199756] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.200272] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 1.207331] clocksource: Switched to clocksource kvm-clock [ 1.208313] pnp: PnP ACPI init [ 1.208939] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 1.210295] pnp: PnP ACPI: found 5 devices [ 1.218378] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.219914] NET: Registered PF_INET protocol family [ 1.221676] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.223973] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.228037] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.229334] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.230858] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.233099] TCP: Hash tables configured (established 65536 bind 65536) [ 1.234222] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.235398] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.236633] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.237862] RPC: Registered named UNIX socket transport module. [ 1.238879] RPC: Registered udp transport module. [ 1.239694] RPC: Registered tcp transport module. [ 1.240493] RPC: Registered tcp-with-tls transport module. [ 1.241417] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.242511] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.243569] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.244619] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.245795] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window] [ 1.246956] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.248208] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window] [ 1.249596] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.250922] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.254464] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.255685] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.258332] PCI: CLS 0 bytes, default 64 [ 1.259065] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.260170] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB) [ 1.261528] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns [ 1.264302] Initialise system trusted keyrings [ 1.265244] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.266517] NFS: Registering the id_resolver key type [ 1.267389] Key type id_resolver registered [ 1.268091] Key type id_legacy registered [ 1.292895] Key type cifs.idmap registered [ 1.300778] xor: automatically using best checksumming function avx [ 1.302104] Key type asymmetric registered [ 1.302815] Asymmetric key parser 'x509' registered [ 1.303654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.304888] io scheduler mq-deadline registered [ 1.305659] io scheduler kyber registered [ 1.306326] io scheduler bfq registered [ 1.307237] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.309577] ACPI: button: Power Button [PWRF] [ 1.311769] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.315270] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.320352] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.328331] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.331515] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.333695] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.336288] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.340572] Linux agpgart interface v0.103 [ 1.341976] ACPI: bus type drm_connector registered [ 1.343652] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.345350] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.351668] Console: switching to colour dummy device 80x25 [ 1.353778] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.353782] [drm] features: -context_init [ 1.359803] [drm] number of scanouts: 1 [ 1.361677] [drm] number of cap sets: 0 [ 1.365163] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 1.375828] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.406116] Console: switching to colour frame buffer device 160x50 [ 1.444648] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.453051] brd: module loaded [ 1.457675] loop: module loaded [ 1.459335] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.465964] virtio_blk virtio3: [vda] 1040512 512-byte logical blocks (533 MB/508 MiB) [ 1.472940] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.476613] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.479457] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.483183] scsi host0: ahci [ 1.484776] scsi host1: ahci [ 1.486381] scsi host2: ahci [ 1.488019] scsi host3: ahci [ 1.489641] scsi host4: ahci [ 1.491277] scsi host5: ahci [ 1.492737] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0 [ 1.496675] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0 [ 1.500554] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0 [ 1.506999] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0 [ 1.510956] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0 [ 1.514847] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0 [ 1.521408] e100: Intel(R) PRO/100 Network Driver [ 1.523744] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.526346] e1000: Intel(R) PRO/1000 Network Driver [ 1.528659] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.531370] e1000e: Intel(R) PRO/1000 Network Driver [ 1.533794] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.536698] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.539331] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.544325] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.546847] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.552626] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.561573] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.565108] hub 1-0:1.0: USB hub found [ 1.566955] hub 1-0:1.0: 6 ports detected [ 1.569185] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.571671] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.575390] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.578298] hub 2-0:1.0: USB hub found [ 1.580164] hub 2-0:1.0: 2 ports detected [ 1.588965] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.591977] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.595636] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.598665] hub 3-0:1.0: USB hub found [ 1.600418] hub 3-0:1.0: 2 ports detected [ 1.603567] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.606375] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.610783] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.613751] hub 4-0:1.0: USB hub found [ 1.615545] hub 4-0:1.0: 2 ports detected [ 1.617677] usbcore: registered new interface driver usb-storage [ 1.620684] usbcore: registered new interface driver usbserial_generic [ 1.623700] usbserial: USB Serial support registered for generic [ 1.626544] usbcore: registered new interface driver ftdi_sio [ 1.629312] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.632735] usbcore: registered new interface driver pl2303 [ 1.635307] usbserial: USB Serial support registered for pl2303 [ 1.638113] i8042: PNP: No PS/2 controller found. [ 1.640530] mousedev: PS/2 mouse device common for all mice [ 1.643277] rtc_cmos 00:03: RTC can wake from S4 [ 1.646527] rtc_cmos 00:03: registered as rtc0 [ 1.648751] rtc_cmos 00:03: setting system clock to 2025-07-07T07:53:45 UTC (1751874825) [ 1.652580] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.656445] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.658335] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.658797] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.665050] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.668695] sdhci: Secure Digital Host Controller Interface driver [ 1.671722] sdhci: Copyright(c) Pierre Ossman [ 1.673810] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.676629] usbcore: registered new interface driver usbhid [ 1.679233] usbhid: USB HID core driver [ 1.681355] u32 classifier [ 1.682668] input device check on [ 1.684406] Actions configured [ 1.686094] NET: Registered PF_INET6 protocol family [ 1.688956] Segment Routing with IPv6 [ 1.690728] In-situ OAM (IOAM) with IPv6 [ 1.692625] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.696039] NET: Registered PF_PACKET protocol family [ 1.698626] Bridge firewalling registered [ 1.701030] l2tp_core: L2TP core driver, V2.0 [ 1.703560] Key type dns_resolver registered [ 1.706112] NET: Registered PF_VSOCK protocol family [ 1.709597] IPI shorthand broadcast: enabled [ 1.727554] sched_clock: Marking stable (1585008601, 142476157)->(1813024749, -85539991) [ 1.730776] registered taskstats version 1 [ 1.732360] Loading compiled-in X.509 certificates [ 1.751034] Key type .fscrypt registered [ 1.752327] Key type fscrypt-provisioning registered [ 1.754350] Btrfs loaded, zoned=no, fsverity=no [ 1.759840] Key type encrypted registered [ 1.761314] printk: legacy console [netcon0] enabled [ 1.762919] netconsole: network logging started [ 1.809518] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.830328] ata5: SATA link down (SStatus 0 SControl 300) [ 1.831459] ata1: SATA link down (SStatus 0 SControl 300) [ 1.833559] ata4: SATA link down (SStatus 0 SControl 300) [ 1.835101] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.838074] ata6: SATA link down (SStatus 0 SControl 300) [ 1.839523] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.841497] ata3.00: applying bridge limits [ 1.843057] ata2: SATA link down (SStatus 0 SControl 300) [ 1.844150] ata3.00: configured for UDMA/100 [ 1.846288] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.876768] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.879671] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.903503] IP-Config: Complete: [ 1.904956] device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15 [ 1.909351] host=192.168.7.16, domain=, nis-domain=(none) [ 1.911890] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.911893] nameserver0=8.8.8.8 [ 1.917174] clk: Disabling unused clocks [ 1.919590] md: Waiting for all devices to be available before autodetect [ 1.922144] md: If you don't use raid, use raid=noautodetect [ 1.924328] md: Autodetecting RAID arrays. [ 1.926154] md: autorun ... [ 1.927253] md: ... autorun DONE. [ 1.938094] EXT4-fs (vda): mounted filesystem a8970a0b-ae97-4f90-bbfc-ba1e56b818c1 r/w with ordered data mode. Quota mode: disabled. [ 1.943194] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.945023] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 [ 1.946017] devtmpfs: mounted [ 1.949096] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.953788] Freeing unused kernel image (initmem) memory: 3528K [ 1.956138] Write protecting the kernel read-only data: 26624k [ 1.958856] Freeing unused kernel image (rodata/data gap) memory: 284K [ 1.961338] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 2.026122] udevd[136]: starting version 3.2.14 [ 2.031985] udevd[138]: starting eudev-3.2.14 [ 2.085867] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 2.230674] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 [ 2.288142] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.352791] EXT4-fs (vda): re-mounted a8970a0b-ae97-4f90-bbfc-ba1e56b818c1. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.2.99+snapshot-625e5277d0695452164b5ce3b2d913cebca8dcba qemux86-64 /dev/ttyS0 qemux86-64 login: