[    0.799267] pci 0000:00:03.0: enabling Extended Tags
[    0.801264] pci 0000:00:03.0: BAR 0 [mem 0x40000000-0x40ffffff pref]: assigned
[    0.801559] pci 0000:00:03.0: ROM [mem 0x41000000-0x41007fff pref]: assigned
[    0.801649] pci 0000:00:01.0: BAR 4 [mem 0x400000000-0x400003fff 64bit pref]: assigned
[    0.801723] pci 0000:00:02.0: BAR 0 [mem 0x400004000-0x400007fff 64bit]: assigned
[    0.801765] pci 0000:00:01.0: BAR 1 [mem 0x41008000-0x41008fff]: assigned
[    0.801779] pci 0000:00:03.0: BAR 2 [mem 0x41009000-0x41009fff]: assigned
[    0.801805] pci 0000:00:01.0: BAR 0 [io  0x0020-0x003f]: assigned
[    0.802052] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.802083] pci_bus 0000:00: resource 5 [mem 0x40000000-0x7fffffff]
[    0.802093] pci_bus 0000:00: resource 6 [mem 0x400000000-0x7ffffffff]
[    0.802834] pci 0000:00:02.0: enabling device (0000 -> 0002)
[    0.809657] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)
[    0.813466] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.825723] printk: legacy console [ttyS0] disabled
[    0.828916] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A
[    0.831035] printk: legacy console [ttyS0] enabled
[    0.906821] printk: legacy console [hvc0] enabled
[    0.908411] bochs-drm 0000:00:03.0: enabling device (0000 -> 0002)
[    0.913248] [drm] Found bochs VGA, ID 0xb0c5.
[    0.914209] [drm] Framebuffer size 16384 kB @ 0x40000000, mmio @ 0x41009000.
[    0.923736] [drm] Initialized bochs-drm 1.0.0 for 0000:00:03.0 on minor 0
[    0.982398] Console: switching to colour frame buffer device 160x50
[    1.003653] bochs-drm 0000:00:03.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.028404] brd: module loaded
[    1.030832] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    1.037025] virtio_blk virtio1: [vda] 780408 512-byte logical blocks (400 MB/381 MiB)
[    1.053629] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    1.054664] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    1.058843] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    1.061981] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    1.062334] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    1.062802] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    1.069854] hub 1-0:1.0: USB hub found
[    1.070729] hub 1-0:1.0: 4 ports detected
[    1.074428] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.076134] hub 2-0:1.0: USB hub found
[    1.076522] hub 2-0:1.0: 4 ports detected
[    1.081209] goldfish_rtc 101000.rtc: registered as rtc0
[    1.082046] goldfish_rtc 101000.rtc: setting system clock to 2026-02-13T20:20:38 UTC (1771014038)
[    1.084511] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    1.087525] usbcore: registered new interface driver usbhid
[    1.088132] usbhid: USB HID core driver
[    1.088911] riscv-pmu-sbi: SBI PMU extension is available
[    1.089961] riscv-pmu-sbi: 16 firmware and 18 hardware counters
[    1.093157] u32 classifier
[    1.093939]     input device check on
[    1.094227]     Actions configured
[    1.096930] NET: Registered PF_INET6 protocol family
[    1.104835] Segment Routing with IPv6
[    1.105465] In-situ OAM (IOAM) with IPv6
[    1.106523] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.109725] NET: Registered PF_PACKET protocol family
[    1.110756] Bridge firewalling registered
[    1.112231] l2tp_core: L2TP core driver, V2.0
[    1.112633] Key type dns_resolver registered
[    1.113560] NET: Registered PF_VSOCK protocol family
[    1.131843] registered taskstats version 1
[    1.154347] Key type .fscrypt registered
[    1.154879] Key type fscrypt-provisioning registered
[    1.158718] Btrfs loaded, zoned=no, fsverity=no
[    1.172254] Key type encrypted registered
[    1.174148] netconsole: network logging started
[    1.213796] IP-Config: Complete:
[    1.214461]      device=eth0, hwaddr=52:54:00:12:34:14, ipaddr=192.168.7.20, mask=255.255.255.0, gw=192.168.7.19
[    1.215368]      host=192.168.7.20, domain=, nis-domain=(none)
[    1.215894]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.215940]      nameserver0=8.8.8.8
[    1.219255] clk: Disabling unused clocks
[    1.223217] md: Waiting for all devices to be available before autodetect
[    1.223648] md: If you don't use raid, use raid=noautodetect
[    1.223993] md: Autodetecting RAID arrays.
[    1.224266] md: autorun ...
[    1.224444] md: ... autorun DONE.
[    1.269657] EXT4-fs (vda): mounted filesystem 2f759371-0cbd-46bb-b390-5f5de2a3668f r/w with ordered data mode. Quota mode: disabled.
[    1.271468] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.273699] devtmpfs: mounted
[    1.321876] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.377118] Freeing unused kernel image (initmem) memory: 2652K
[    1.378587] Run /sbin/init as init process
INIT: version 3.14 booting
[    1.480274] input: QEMU QEMU USB Tablet as /devices/platform/soc/30000000.pci/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    1.483888] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    1.609500] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    1.762819] input: QEMU QEMU USB Keyboard as /devices/platform/soc/30000000.pci/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    1.824620] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
Starting udev
[    2.207009] udevd[123]: starting version 3.2.14
[    2.266730] udevd[125]: starting eudev-3.2.14
[    2.645909] EXT4-fs (vda): re-mounted 2f759371-0cbd-46bb-b390-5f5de2a3668f.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh ECDSA host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 5.3.99+snapshot-7a8e99f9d229602446f05e324f5e4748e1e59473 qemuriscv64 /dev/hvc0

Type 'root' to login with superuser privileges (no password will be asked).

qemuriscv64 login: 