[    0.000000] Linux version 6.18.13-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1 SMP PREEMPT_DYNAMIC Tue Mar  3 16:48:55 UTC 2026
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 405352407 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000823] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000855] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000857] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002719] found SMP MP-table at [mem 0x000f5490-0x000f549f]
[    0.002833] ACPI: Early table checksum verification disabled
[    0.002835] ACPI: RSDP 0x00000000000F52B0 000014 (v00 BOCHS )
[    0.002839] ACPI: RSDT 0x000000001FFE24A7 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002843] ACPI: FACP 0x000000001FFE2287 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002847] ACPI: DSDT 0x000000001FFE0040 002247 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002849] ACPI: FACS 0x000000001FFE0000 000040
[    0.002851] ACPI: APIC 0x000000001FFE237B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002852] ACPI: HPET 0x000000001FFE240B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002854] ACPI: MCFG 0x000000001FFE2443 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002855] ACPI: WAET 0x000000001FFE247F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002857] ACPI: Reserving FACP table memory at [mem 0x1ffe2287-0x1ffe237a]
[    0.002857] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2286]
[    0.002858] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002858] ACPI: Reserving APIC table memory at [mem 0x1ffe237b-0x1ffe240a]
[    0.002859] ACPI: Reserving HPET table memory at [mem 0x1ffe240b-0x1ffe2442]
[    0.002859] ACPI: Reserving MCFG table memory at [mem 0x1ffe2443-0x1ffe247e]
[    0.002860] ACPI: Reserving WAET table memory at [mem 0x1ffe247f-0x1ffe24a6]
[    0.002894] Zone ranges:
[    0.002895]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002897]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002898]   Normal   empty
[    0.002899] Movable zone start for each node
[    0.002899] Early memory node ranges
[    0.002899]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002900]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002901] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003000] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003021] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003986] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004712] ACPI: PM-Timer IO Port: 0x608
[    0.004722] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004744] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004746] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004747] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004748] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004749] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004750] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004752] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004752] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004755] TSC deadline timer available
[    0.004758] CPU topo: Max. logical packages:   1
[    0.004758] CPU topo: Max. logical dies:       1
[    0.004759] CPU topo: Max. dies per package:   1
[    0.004762] CPU topo: Max. threads per core:   1
[    0.004762] CPU topo: Num. cores per package:     4
[    0.004763] CPU topo: Num. threads per package:   4
[    0.004763] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004773] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004784] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004785] Booting paravirtualized kernel on KVM
[    0.004786] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004789] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004960] percpu: Embedded 53 pages/cpu s180184 r8192 d28712 u524288
[    0.004980] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.005036] random: crng init done
[    0.005036] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[    0.005051] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.005059] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.005084] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005243] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005620] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.014438] ftrace: allocating 55757 entries in 220 pages
[    0.014439] ftrace: allocated 220 pages with 5 groups
[    0.014465] Dynamic Preempt: full
[    0.014576] rcu: Preemptible hierarchical RCU implementation.
[    0.014576] rcu: 	RCU event tracing is enabled.
[    0.014577] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014578] 	All grace periods are expedited (rcu_expedited).
[    0.014578] 	Trampoline variant of Tasks RCU enabled.
[    0.014579] 	Rude variant of Tasks RCU enabled.
[    0.014579] 	Tracing variant of Tasks RCU enabled.
[    0.014579] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014580] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014584] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014585] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014586] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.019379] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.019551] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.019601] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.027360] Console: colour VGA+ 80x25
[    0.027436] printk: legacy console [ttyS0] enabled
[    0.254500] ACPI: Core revision 20250807
[    0.255932] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.258912] APIC: Switch to symmetric I/O mode setup
[    0.260688] x2apic enabled
[    0.261820] APIC: Switched APIC routing to: physical x2apic
[    0.264531] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.266488] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.269863] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.270997] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.271864] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.272866] mitigations: Enabled attack vectors: user_kernel, user_user, SMT mitigations: auto
[    0.273864] Speculative Store Bypass: Vulnerable
[    0.274865] Spectre V2 : Mitigation: Retpolines
[    0.275864] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.276865] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.277879] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.278864] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.279865] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.280865] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.281864] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.300922] Freeing SMP alternatives memory: 60K
[    0.301866] pid_max: default: 32768 minimum: 301
[    0.302883] LSM: initializing lsm=capability,landlock
[    0.303889] landlock: Up and running.
[    0.304881] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.305865] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.307052] smpboot: CPU0: AMD Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.307957] Performance Events: AMD PMU driver.
[    0.308869] ... version:                   0
[    0.309866] ... bit width:                 48
[    0.310866] ... generic counters:          4
[    0.311867] ... generic bitmap:            000000000000000f
[    0.312866] ... fixed-purpose counters:    0
[    0.313866] ... fixed-purpose bitmap:      0000000000000000
[    0.314867] ... value mask:                0000ffffffffffff
[    0.315868] ... max period:                00007fffffffffff
[    0.316867] ... global_ctrl mask:          000000000000000f
[    0.317945] signal: max sigframe size: 1776
[    0.318899] rcu: Hierarchical SRCU implementation.
[    0.319867] rcu: 	Max phase no-delay instances is 400.
[    0.320895] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.321988] smp: Bringing up secondary CPUs ...
[    0.322931] smpboot: x86: Booting SMP configuration:
[    0.323873] .... node  #0, CPUs:      #1 #2 #3
[    0.358914] smp: Brought up 1 node, 4 CPUs
[    0.360868] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.362291] Memory: 469720K/523736K available (20210K kernel code, 2461K rwdata, 6204K rodata, 3656K init, 1872K bss, 49724K reserved, 0K cma-reserved)
[    0.363088] devtmpfs: initialized
[    0.364023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.364870] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.365892] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[    0.366893] pinctrl core: initialized pinctrl subsystem
[    0.368680] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.368965] thermal_sys: Registered thermal governor 'step_wise'
[    0.368975] cpuidle: using governor menu
[    0.371069] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.371868] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.372875] PCI: Using configuration type 1 for base access
[    0.373913] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.391915] raid6: avx2x4   gen() 21783 MB/s
[    0.412225] raid6: avx2x2   gen() 22816 MB/s
[    0.432284] raid6: avx2x1   gen() 19979 MB/s
[    0.434871] raid6: using algorithm avx2x2 gen() 22816 MB/s
[    0.455524] raid6: .... xor() 19167 MB/s, rmw enabled
[    0.457868] raid6: using avx2x2 recovery algorithm
[    0.458937] ACPI: Added _OSI(Module Device)
[    0.460867] ACPI: Added _OSI(Processor Device)
[    0.461867] ACPI: Added _OSI(Processor Aggregator Device)
[    0.464679] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.467977] ACPI: Interpreter enabled
[    0.468878] ACPI: PM: (supports S0 S3 S5)
[    0.469867] ACPI: Using IOAPIC for interrupt routing
[    0.470898] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.471867] PCI: Using E820 reservations for host bridge windows
[    0.472943] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.475745] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.475871] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.476904] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.477918] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.478910] PCI host bridge to bus 0000:00
[    0.479870] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.480867] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.481867] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.482867] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.483867] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.484868] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.485867] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.486937] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.488661] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    0.490329] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[    0.490891] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[    0.491913] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.492935] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.494260] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.496466] pci 0000:00:02.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.496881] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.497917] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]
[    0.498881] pci 0000:00:02.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.500951] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.502881] pci 0000:00:03.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.503880] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[    0.504917] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]
[    0.506968] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.508890] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.509881] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.510917] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]
[    0.513103] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.514946] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.516128] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.517808] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.518129] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.519793] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.520192] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.521715] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.522224] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.523462] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.524225] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.526148] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.526880] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.528422] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.529684] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.533276] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.533978] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.534973] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.535972] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.536970] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.537971] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.538972] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.539973] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.540913] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.541880] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.542877] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.543879] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.544876] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.545878] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.546877] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.547877] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.549207] iommu: Default domain type: Translated
[    0.549867] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.550902] SCSI subsystem initialized
[    0.551898] ACPI: bus type USB registered
[    0.552881] usbcore: registered new interface driver usbfs
[    0.553874] usbcore: registered new interface driver hub
[    0.554875] usbcore: registered new device driver usb
[    0.555880] pps_core: LinuxPPS API ver. 1 registered
[    0.556867] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.557871] PTP clock support registered
[    0.559000] Bluetooth: Core ver 2.22
[    0.559874] NET: Registered PF_BLUETOOTH protocol family
[    0.560867] Bluetooth: HCI device and connection manager initialized
[    0.561868] Bluetooth: HCI socket layer initialized
[    0.562868] Bluetooth: L2CAP socket layer initialized
[    0.563870] Bluetooth: SCO socket layer initialized
[    0.564893] PCI: Using ACPI for IRQ routing
[    0.664128] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.664862] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.664862] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.664870] vgaarb: loaded
[    0.665859] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.666867] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.671916] clocksource: Switched to clocksource kvm-clock
[    0.673946] pnp: PnP ACPI init
[    0.675134] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.677874] pnp: PnP ACPI: found 5 devices
[    0.685608] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.688676] NET: Registered PF_INET protocol family
[    0.690391] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.693010] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.695876] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.698582] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.701388] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.703861] TCP: Hash tables configured (established 4096 bind 4096)
[    0.706066] UDP hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.708338] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.710757] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.713066] RPC: Registered named UNIX socket transport module.
[    0.715111] RPC: Registered udp transport module.
[    0.716712] RPC: Registered tcp transport module.
[    0.718347] RPC: Registered tcp-with-tls transport module.
[    0.720254] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.722462] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.724585] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.726697] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.729088] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.731483] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.733825] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.736473] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.738635] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.740820] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.742979] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.745188] PCI: CLS 0 bytes, default 64
[    0.746656] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.751054] Initialise system trusted keyrings
[    0.752721] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.755166] NFS: Registering the id_resolver key type
[    0.756892] Key type id_resolver registered
[    0.758346] Key type id_legacy registered
[    0.760205] Key type cifs.idmap registered
[    0.768700] xor: automatically using best checksumming function   avx       
[    0.771151] Key type asymmetric registered
[    0.772556] Asymmetric key parser 'x509' registered
[    0.774261] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.776794] io scheduler mq-deadline registered
[    0.778365] io scheduler kyber registered
[    0.779757] io scheduler bfq registered
[    0.781411] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.787333] ACPI: button: Power Button [PWRF]
[    0.789570] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.792729] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.795720] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.798781] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.801198] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.804046] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.808053] Linux agpgart interface v0.103
[    0.809548] ACPI: bus type drm_connector registered
[    0.811276] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
[    0.817390] Console: switching to colour dummy device 80x25
[    0.819406] [drm] Found bochs VGA, ID 0xb0c5.
[    0.820897] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[    0.823547] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
[    0.828600] fbcon: bochs-drmdrmfb (fb0) is primary device
[    0.835045] Console: switching to colour frame buffer device 160x50
[    0.839962] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    0.845066] brd: module loaded
[    0.848963] loop: module loaded
[    0.852108] virtio_blk virtio2: 4/0/0 default/read/poll queues
[    0.860802] virtio_blk virtio2: [vda] 1382414 512-byte logical blocks (708 MB/675 MiB)
[    0.871633] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.878198] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.883392] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.890058] scsi host0: ahci
[    0.892753] scsi host1: ahci
[    0.895379] scsi host2: ahci
[    0.898026] scsi host3: ahci
[    0.900493] scsi host4: ahci
[    0.902616] scsi host5: ahci
[    0.904608] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 31 lpm-pol 1
[    0.910007] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 31 lpm-pol 1
[    0.915384] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 31 lpm-pol 1
[    0.920737] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 31 lpm-pol 1
[    0.926131] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 31 lpm-pol 1
[    0.931511] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 31 lpm-pol 1
[    0.937535] e100: Intel(R) PRO/100 Network Driver
[    0.939229] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.941053] e1000: Intel(R) PRO/1000 Network Driver
[    0.942650] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.944551] e1000e: Intel(R) PRO/1000 Network Driver
[    0.946181] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.948125] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.949881] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.952779] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.955002] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.957528] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.959671] hub 1-0:1.0: USB hub found
[    0.960920] hub 1-0:1.0: 2 ports detected
[    0.962907] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.967275] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.973885] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.984369] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.989351] hub 2-0:1.0: USB hub found
[    0.992461] hub 2-0:1.0: 6 ports detected
[    1.016535] hub 1-0:1.0: USB hub found
[    1.019787] hub 1-0:1.0: 2 ports detected
[    1.023338] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.027695] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.034004] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    1.039080] hub 3-0:1.0: USB hub found
[    1.042197] hub 3-0:1.0: 2 ports detected
[    1.046832] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.051210] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.057818] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    1.062830] hub 4-0:1.0: USB hub found
[    1.065925] hub 4-0:1.0: 2 ports detected
[    1.069492] usbcore: registered new interface driver usb-storage
[    1.074434] usbcore: registered new interface driver usbserial_generic
[    1.076759] usbserial: USB Serial support registered for generic
[    1.078816] usbcore: registered new interface driver ftdi_sio
[    1.080779] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.083270] usbcore: registered new interface driver pl2303
[    1.085184] usbserial: USB Serial support registered for pl2303
[    1.087217] i8042: PNP: No PS/2 controller found.
[    1.088942] mousedev: PS/2 mouse device common for all mice
[    1.090936] rtc_cmos 00:03: RTC can wake from S4
[    1.093187] rtc_cmos 00:03: registered as rtc0
[    1.094809] rtc_cmos 00:03: setting system clock to 2026-03-20T16:11:10 UTC (1774023070)
[    1.097643] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    1.100510] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    1.101037] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.103681] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    1.108681] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    1.110923] sdhci: Secure Digital Host Controller Interface driver
[    1.119222] sdhci: Copyright(c) Pierre Ossman
[    1.120758] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.122826] usbcore: registered new interface driver usbhid
[    1.124805] usbhid: USB HID core driver
[    1.126179] u32 classifier
[    1.127156]     input device check on
[    1.128453]     Actions configured
[    1.129721] NET: Registered PF_INET6 protocol family
[    1.131766] Segment Routing with IPv6
[    1.133087] In-situ OAM (IOAM) with IPv6
[    1.134472] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.136586] NET: Registered PF_PACKET protocol family
[    1.138344] Bridge firewalling registered
[    1.139725] l2tp_core: L2TP core driver, V2.0
[    1.141235] Key type dns_resolver registered
[    1.142759] NET: Registered PF_VSOCK protocol family
[    1.144919] IPI shorthand broadcast: enabled
[    1.147278] sched_clock: Marking stable (901068760, 245306041)->(1323366951, -176992150)
[    1.150128] registered taskstats version 1
[    1.151556] Loading compiled-in X.509 certificates
[    1.154051] Key type .fscrypt registered
[    1.155411] Key type fscrypt-provisioning registered
[    1.157263] Btrfs loaded, zoned=no, fsverity=no
[    1.159573] Key type encrypted registered
[    1.161102] netconsole: network logging started
[    1.232381] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.246836] ata5: SATA link down (SStatus 0 SControl 300)
[    1.251973] ata2: SATA link down (SStatus 0 SControl 300)
[    1.256990] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.262552] ata1: SATA link down (SStatus 0 SControl 300)
[    1.267247] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.271900] ata3.00: applying bridge limits
[    1.275758] ata4: SATA link down (SStatus 0 SControl 300)
[    1.280970] ata6: SATA link down (SStatus 0 SControl 300)
[    1.285576] ata3.00: configured for UDMA/100
[    1.289984] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.323864] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.329278] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.357337] IP-Config: Complete:
[    1.360053]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    1.368272]      host=192.168.7.4, domain=, nis-domain=(none)
[    1.373183]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.373188]      nameserver0=8.8.8.8
[    1.382821] clk: Disabling unused clocks
[    1.386345] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.395732] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.405070] md: Waiting for all devices to be available before autodetect
[    1.408793] md: If you don't use raid, use raid=noautodetect
[    1.411868] md: Autodetecting RAID arrays.
[    1.414086] md: autorun ...
[    1.415647] md: ... autorun DONE.
[    1.421421] EXT4-fs (vda): mounted filesystem 39efaed0-8b6c-408a-831a-4fb0bc086a66 r/w with ordered data mode. Quota mode: disabled.
[    1.427804] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.431142] devtmpfs: mounted
[    1.433751] Freeing unused kernel image (initmem) memory: 3656K
[    1.436975] Write protecting the kernel read-only data: 28672k
[    1.439908] Freeing unused kernel image (text/rodata gap) memory: 268K
[    1.441864] Freeing unused kernel image (rodata/data gap) memory: 1988K
[    1.443711] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.509524] udevd[149]: starting version 3.2.14
[    1.518040] udevd[150]: starting eudev-3.2.14
[    1.521096] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.658373] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.717190] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.786870] EXT4-fs (vda): re-mounted 39efaed0-8b6c-408a-831a-4fb0bc086a66.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus[338]: Unknown username "pipewire" in message bus configuration file
dbus.
00:00:00.000 [1;34m [9.3/seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [9.3/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.133 [1;34m [9.3/seatd/server.c:145] New client connected (pid: 354, uid: 1000, gid: 1000)[0m
00:00:00.133 [1;34m [9.3/seatd/seat.c:248] Added client 2 to seat0[0m
00:00:00.133 [1;34m [9.3/seatd/seat.c:584] Opened client 2 on seat0[0m
pci id for fd 15: 1234:1111, driver (null)
pci id for fd 16: 1234:1111, driver (null)
pci id for fd 17: 1234:1111, driver (null)
pci id for fd 16: 1234:1111, driver (null)
pci id for fd 17: 1234:1111, driver (null)
could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCiycdCiSEU84VzTfaF1upYQ2QsbpQByS/bhhyincfpiTCexb/MDnqg19L/A0O8kvOQSH7oqdzxC2vKJqt1pVF1wF1dg8cUe3RxQjc2IMuLf9gqw8czWyhwIEY18WeYGDrVq5KLfCd5YlFiFvVfd5lUT3vs7vgaE8BY0PSpv+KpFxH4qW1EXDfuVPRMNIIBN+/BXfyPC9Et93QMo3pLhgwu2tnzvZGq8Fu5Gsqsjj356Y08DZdqa9v+N7KSwZ0ZBH8ArykjNWuaHl7b9perHqfNqTLs4+4xa10YWREVg6vSMZ2Exd8JpMVQuec2r3AO45Egoiqiw0IqEB3JCPTxmO8D root@qemux86-64
Fingerprint: SHA256:+89xhaCKLVDr/n6bbWYD18vm5F8bhmcXUKij8rZTqIE
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: [    2.481354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.482797] Bluetooth: BNEP filters: protocol multicast
[    2.484271] Bluetooth: BNEP socket layer initialized
done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.3.99+snapshot-8b3bbf3a1d0041a85b25263a27872be1e56b962c qemux86-64 /dev/ttyS0

Type 'root' to login with superuser privileges (no password will be asked).

qemux86-64 login: 00:01:11.800 [1;34m [9.3/seatd/server.c:145] New client connected (pid: 5901, uid: 0, gid: 0)[0m
00:01:11.804 [1;31m [9.3/seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:11.805 [1;31m [9.3/seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
