[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.18.28-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1 PREEMPT Mon May 11 19:12:30 UTC 2026
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: ARM Versatile PB
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65536
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 45625 entries in 134 pages
[    0.000000] ftrace: allocated 134 pages with 3 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41
[    0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000109] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000361] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.005018] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.007209] Console: colour dummy device 80x30
[    0.008502] Calibrating delay loop... 2229.86 BogoMIPS (lpj=11149312)
[    0.169463] CPU: Testing write buffer coherency: ok
[    0.170588] pid_max: default: 32768 minimum: 301
[    0.172285] LSM: initializing lsm=capability,landlock
[    0.172712] landlock: Up and running.
[    0.174408] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.174436] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.204070] Setting up static identity map for 0x8400 - 0x8458
[    0.205083] rcu: Hierarchical SRCU implementation.
[    0.205113] rcu: 	Max phase no-delay instances is 1000.
[    0.210446] Memory: 237636K/262144K available (11692K kernel code, 1525K rwdata, 3168K rodata, 508K init, 324K bss, 22424K reserved, 0K cma-reserved)
[    0.216207] devtmpfs: initialized
[    0.226610] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[    0.228536] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.228647] posixtimers hash table entries: 512 (order: 0, 2048 bytes, linear)
[    0.228761] futex hash table entries: 256 (4096 bytes on 1 NUMA nodes, total 4 KiB, linear).
[    0.234393] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.236812] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.245307] /bridge: Fixed dependency cycle(s) with /vga
[    0.245854] /vga: Fixed dependency cycle(s) with /bridge
[    0.251504] /amba/display@10120000: Fixed dependency cycle(s) with /bridge
[    0.251702] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.251834] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.254486] /bridge: Fixed dependency cycle(s) with /amba/display@10120000
[    0.254620] /amba/display@10120000: Fixed dependency cycle(s) with /bridge
[    0.254730] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.256850] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.257256] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.257581] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.257711] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.260812] Serial: AMBA PL011 UART driver
[    0.267548] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.269203] printk: console [ttyAMA0] enabled
[    0.303599] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1
[    0.305000] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1
[    0.306035] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
[    0.306702] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1
[    0.308718] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.659531] raid6: int32x8  gen()   140 MB/s
[    0.999740] raid6: int32x4  gen()   200 MB/s
[    1.291525] raid6: int32x2  gen()   904 MB/s
[    1.460026] raid6: int32x1  gen()   245 MB/s
[    1.460103] raid6: using algorithm int32x2 gen() 904 MB/s
[    1.630271] raid6: .... xor() 526 MB/s, rmw enabled
[    1.630351] raid6: using intx1 recovery algorithm
[    1.632705] SCSI subsystem initialized
[    1.633721] usbcore: registered new interface driver usbfs
[    1.633946] usbcore: registered new interface driver hub
[    1.634085] usbcore: registered new device driver usb
[    1.636229] pps_core: LinuxPPS API ver. 1 registered
[    1.636250] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.636315] PTP clock support registered
[    1.638325] Advanced Linux Sound Architecture Driver Initialized.
[    1.651267] vgaarb: loaded
[    1.652903] clocksource: Switched to clocksource arm,sp804
[    1.688168] NET: Registered PF_INET protocol family
[    1.689232] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.695435] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    1.695523] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.695581] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.695638] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    1.695717] TCP: Hash tables configured (established 2048 bind 2048)
[    1.696334] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.696484] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.697541] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.699953] RPC: Registered named UNIX socket transport module.
[    1.699998] RPC: Registered udp transport module.
[    1.700007] RPC: Registered tcp transport module.
[    1.700015] RPC: Registered tcp-with-tls transport module.
[    1.700023] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.700105] PCI: CLS 0 bytes, default 32
[    1.708744] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.711297] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.715652] NFS: Registering the id_resolver key type
[    1.715896] Key type id_resolver registered
[    1.715919] Key type id_legacy registered
[    1.719160] Key type cifs.idmap registered
[    1.829241] xor: measuring software checksum speed
[    1.830947]    arm4regs        :  2042 MB/sec
[    1.832327]    8regs           :  2433 MB/sec
[    1.834858]    32regs          :  2134 MB/sec
[    1.834917] xor: using function: 8regs (2433 MB/sec)
[    1.835380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.835500] io scheduler mq-deadline registered
[    1.835560] io scheduler kyber registered
[    1.835797] io scheduler bfq registered
[    1.842335] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered
[    1.845573] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered
[    1.846492] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered
[    1.847213] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered
[    1.855101] leds-syscon 10000008.0.led: registered LED (null)
[    1.856225] leds-syscon 10000008.1.led: registered LED (null)
[    1.857004] leds-syscon 10000008.2.led: registered LED (null)
[    1.857318] leds-syscon 10000008.3.led: registered LED (null)
[    1.857558] leds-syscon 10000008.4.led: registered LED (null)
[    1.857767] leds-syscon 10000008.5.led: registered LED (null)
[    1.857968] leds-syscon 10000008.6.led: registered LED (null)
[    1.858171] leds-syscon 10000008.7.led: registered LED (null)
[    1.859149] ledtrig-cpu: registered to indicate activity on CPUs
[    1.859721] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges:
[    1.860083] versatile-pci 10001000.pci:       IO 0x0043000000..0x004300ffff -> 0x0000000000
[    1.860414] versatile-pci 10001000.pci:      MEM 0x0050000000..0x005fffffff -> 0x0050000000
[    1.860459] versatile-pci 10001000.pci:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
[    1.861228] versatile-pci 10001000.pci: PCI core found (slot 11)
[    1.862236] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00
[    1.862444] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.862672] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    1.862701] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff]
[    1.862724] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref]
[    1.871498] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint
[    1.872065] pci 0000:00:0c.0: BAR 0 [io  0x0000-0x00ff]
[    1.872139] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x000003ff]
[    1.872152] pci 0000:00:0c.0: BAR 2 [mem 0x00000000-0x00001fff]
[    1.876176] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    1.876231] pci 0000:00:0d.0: BAR 0 [io  0x0000-0x001f]
[    1.876247] pci 0000:00:0d.0: BAR 1 [mem 0x00000000-0x00000fff]
[    1.876279] pci 0000:00:0d.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.876307] pci 0000:00:0d.0: ROM [mem 0x00000000-0x0003ffff pref]
[    1.876673] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    1.876711] pci 0000:00:0e.0: BAR 0 [io  0x0000-0x001f]
[    1.876723] pci 0000:00:0e.0: BAR 1 [mem 0x00000000-0x00000fff]
[    1.876735] pci 0000:00:0e.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.877003] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint
[    1.877037] pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    1.877299] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    1.877334] pci 0000:00:10.0: BAR 1 [mem 0x00000000-0x00000fff]
[    1.877347] pci 0000:00:10.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.877620] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    1.877654] pci 0000:00:11.0: BAR 0 [io  0x0000-0x007f]
[    1.877666] pci 0000:00:11.0: BAR 1 [mem 0x00000000-0x00000fff]
[    1.877678] pci 0000:00:11.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.878402] PCI: bus0: Fast back to back transfers disabled
[    1.879379] pci 0000:00:0d.0: ROM [mem 0x60000000-0x6003ffff pref]: assigned
[    1.879527] pci 0000:00:0d.0: BAR 4 [mem 0x60040000-0x60043fff 64bit pref]: assigned
[    1.879620] pci 0000:00:0e.0: BAR 4 [mem 0x60044000-0x60047fff 64bit pref]: assigned
[    1.879649] pci 0000:00:0f.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned
[    1.879665] pci 0000:00:10.0: BAR 4 [mem 0x60048000-0x6004bfff 64bit pref]: assigned
[    1.879681] pci 0000:00:11.0: BAR 4 [mem 0x6004c000-0x6004ffff 64bit pref]: assigned
[    1.879697] pci 0000:00:0c.0: BAR 2 [mem 0x50004000-0x50005fff]: assigned
[    1.879712] pci 0000:00:0d.0: BAR 1 [mem 0x50006000-0x50006fff]: assigned
[    1.879724] pci 0000:00:0e.0: BAR 1 [mem 0x50007000-0x50007fff]: assigned
[    1.879737] pci 0000:00:10.0: BAR 1 [mem 0x50008000-0x50008fff]: assigned
[    1.879749] pci 0000:00:11.0: BAR 1 [mem 0x50009000-0x50009fff]: assigned
[    1.879762] pci 0000:00:0c.0: BAR 1 [mem 0x5000a000-0x5000a3ff]: assigned
[    1.879781] pci 0000:00:0c.0: BAR 0 [io  0x1000-0x10ff]: assigned
[    1.879803] pci 0000:00:11.0: BAR 0 [io  0x1400-0x147f]: assigned
[    1.879815] pci 0000:00:0d.0: BAR 0 [io  0x1480-0x149f]: assigned
[    1.879827] pci 0000:00:0e.0: BAR 0 [io  0x14a0-0x14bf]: assigned
[    1.880030] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    1.880043] pci_bus 0000:00: resource 5 [mem 0x50000000-0x5fffffff]
[    1.880053] pci_bus 0000:00: resource 6 [mem 0x60000000-0x6fffffff pref]
[    1.880846] pci 0000:00:0f.0: enabling device (0100 -> 0102)
[    1.882742] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103)
[    1.898797] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103)
[    1.899791] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102)
[    1.900707] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103)
[    1.902632] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.915475] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0
[    1.915845] [drm] features: -virgl +edid -resource_blob -host_visible
[    1.915860] [drm] features: -context_init
[    1.916115] [drm] number of scanouts: 1
[    1.916137] [drm] number of cap sets: 0
[    1.921527] random: crng init done
[    1.928957] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:10.0 on minor 0
[    1.987315] Console: switching to colour frame buffer device 160x50
[    1.994910] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    1.996473] versatile-tft-panel 10000000.sysreg:display@0: no panel detected
[    1.997950] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.032724] brd: module loaded
[    2.034758] virtio_blk virtio3: 1/0/0 default/read/poll queues
[    2.038271] virtio_blk virtio3: [vda] 1023136 512-byte logical blocks (524 MB/500 MiB)
[    2.050056] physmap-flash 34000000.flash: versatile/realview flash protection
[    2.058081] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff]
[    2.060256] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
[    2.060555] Intel/Sharp Extended Query Table at 0x0031
[    2.061420] Using buffer write method
[    2.100317] smc91x: not found (-19).
[    2.100735] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found
[    2.100887] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000
[    2.126543] rtc-ds1307 0-0068: registered as rtc0
[    2.136227] rtc-ds1307 0-0068: setting system clock to 2026-05-15T11:34:48 UTC (1778844888)
[    2.139472] rtc-pl031 101e8000.rtc: registered as rtc1
[    2.139934] i2c_dev: i2c /dev entries driver
[    2.140641] versatile reboot driver registered
[    2.142160] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    2.148742] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio)
[    2.152044] usbcore: registered new interface driver usbhid
[    2.152074] usbhid: USB HID core driver
[    2.155553] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio)
[    2.176036] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    2.176083] aaci-pl041 10004000.aaci: FIFO 512 entries
[    2.176817] u32 classifier
[    2.176835]     input device check on
[    2.176843]     Actions configured
[    2.178394] NET: Registered PF_INET6 protocol family
[    2.188379] Segment Routing with IPv6
[    2.188557] In-situ OAM (IOAM) with IPv6
[    2.189041] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.191110] NET: Registered PF_PACKET protocol family
[    2.191551] Bridge firewalling registered
[    2.192151] l2tp_core: L2TP core driver, V2.0
[    2.192255] Key type dns_resolver registered
[    2.196041] NET: Registered PF_VSOCK protocol family
[    2.215882] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0
[    2.227012] registered taskstats version 1
[    2.250384] Key type .fscrypt registered
[    2.250434] Key type fscrypt-provisioning registered
[    2.255983] Btrfs loaded, zoned=no, fsverity=no
[    2.264472] Key type encrypted registered
[    2.266867] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.268299] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.268884] netconsole: network logging started
[    2.636033] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2
[    2.637645] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.674655] IP-Config: Complete:
[    2.674730]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    2.674867]      host=192.168.7.4, domain=, nis-domain=(none)
[    2.674879]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.674906]      nameserver0=8.8.8.8
[    2.677569] clk: Disabling unused clocks
[    2.677879] ALSA device list:
[    2.677930]   #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    2.682141] md: Waiting for all devices to be available before autodetect
[    2.682159] md: If you don't use raid, use raid=noautodetect
[    2.682189] md: Autodetecting RAID arrays.
[    2.682214] md: autorun ...
[    2.682242] md: ... autorun DONE.
[    2.827873] EXT4-fs (vda): mounted filesystem 4661eead-f36c-4be9-bb75-4cb5f8cba247 r/w with ordered data mode. Quota mode: disabled.
[    2.828233] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.829676] devtmpfs: mounted
[    2.860141] Freeing unused kernel image (initmem) memory: 508K
[    2.860208] Kernel memory protection not selected by kernel config.
[    2.860418] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    4.154120] udevd[111]: starting version 3.2.14
[    4.239982] udevd[112]: starting eudev-3.2.14
[   10.035192] EXT4-fs (vda): re-mounted 4661eead-f36c-4be9-bb75-4cb5f8cba247.
[   13.285609] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[   13.286871] amba 10100000.smc: deferred probe pending: (reason unknown)
[   13.286937] amba 10110000.mpmc: deferred probe pending: (reason unknown)
[   13.286955] amba 101e0000.sctl: deferred probe pending: (reason unknown)
[   13.286969] amba 101e1000.watchdog: deferred probe pending: (reason unknown)
[   13.286982] amba 101f0000.sci: deferred probe pending: (reason unknown)
[   13.286995] amba 101f4000.spi: deferred probe pending: (reason unknown)
[   13.287008] amba 1000a000.sci: deferred probe pending: (reason unknown)
[   13.287021] amba 10120000.display: deferred probe pending: (reason unknown)
ALSA: Restoring mixer settings...
alsa-lib /usr/src/debug/alsa-lib/1.2.15.3/src/ucm/main.c:1804:(snd_use_case_mgr_open) [error.ucm] failed to import hw:0 use case configuration -2
No state is present for card Interface
alsa-lib /usr/src/debug/alsa-lib/1.2.15.3/src/ucm/main.c:1804:(snd_use_case_mgr_open) [error.ucm] failed to import hw:0 use case configuration -2
Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" ""
Hardware is initialized using a generic method
No state is present for card Interface
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus[452]: Unknown username "pipewire" in message bus configuration file
dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.22
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarmv5 6.18.28-yocto-standard #1 PREEMPT Mon May 11 19:12:30 UTC 2026 armv5tejl
Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
 
Current version of pixman: 0.46.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 15 11:35:03 2026
Starting rpcbind daemon...(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 6.0.99+snapshot-c3b37e75279d018cd68a62a21e73fbf3007342ef qemuarmv5 /dev/ttyAMA0

Type 'root' to login with superuser privileges (no password will be asked).

qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Multiple symbols for level 1/group 1 on key <FK23>
>                   Using F23, ignoring XF86TouchpadOff
> Warning:          Symbol map for key <FK23> redefined
>                   Using last definition for conflicting fields
> Warning:          Symbol map for key <FK24> redefined
>                   Using last definition for conflicting fields
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-FxvkNKW0tp,guid=23bc94d092b1f74be73bff696a0704ee
/usr/bin/start-pulseaudio-x11: line 41: /usr/bin/pactl: No such file or directory
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[589]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=564 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[589]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

** (at-spi2-registryd:627): [1;33mWARNING[0m **: [34m11:35:54.235[0m: Disabling unresponsive app with pid 599

** (at-spi2-registryd:627): [1;33mWARNING[0m **: [34m11:36:14.305[0m: Re-enabling app with pid 599
