[    0.000000] Linux version 6.18.28-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 16.1.0, GNU ld (GNU Binutils) 2.46) #1 SMP PREEMPT_DYNAMIC Mon May 11 19:12:30 UTC 2026
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 421211931 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2750.000 MHz processor
[    0.000779] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000811] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000813] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002667] found SMP MP-table at [mem 0x000f5490-0x000f549f]
[    0.002756] ACPI: Early table checksum verification disabled
[    0.002758] ACPI: RSDP 0x00000000000F52B0 000014 (v00 BOCHS )
[    0.002763] ACPI: RSDT 0x000000001FFE24A7 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002767] ACPI: FACP 0x000000001FFE2287 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002770] ACPI: DSDT 0x000000001FFE0040 002247 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002772] ACPI: FACS 0x000000001FFE0000 000040
[    0.002774] ACPI: APIC 0x000000001FFE237B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002775] ACPI: HPET 0x000000001FFE240B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002777] ACPI: MCFG 0x000000001FFE2443 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002778] ACPI: WAET 0x000000001FFE247F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002780] ACPI: Reserving FACP table memory at [mem 0x1ffe2287-0x1ffe237a]
[    0.002781] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2286]
[    0.002781] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002782] ACPI: Reserving APIC table memory at [mem 0x1ffe237b-0x1ffe240a]
[    0.002782] ACPI: Reserving HPET table memory at [mem 0x1ffe240b-0x1ffe2442]
[    0.002782] ACPI: Reserving MCFG table memory at [mem 0x1ffe2443-0x1ffe247e]
[    0.002783] ACPI: Reserving WAET table memory at [mem 0x1ffe247f-0x1ffe24a6]
[    0.002817] Zone ranges:
[    0.002818]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002820]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002821]   Normal   empty
[    0.002822] Movable zone start for each node
[    0.002822] Early memory node ranges
[    0.002823]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002824]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002824] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.002932] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.002951] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003848] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.004580] ACPI: PM-Timer IO Port: 0x608
[    0.004590] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.004613] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.004615] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.004616] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.004617] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.004618] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.004619] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.004621] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.004621] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.004623] TSC deadline timer available
[    0.004627] CPU topo: Max. logical packages:   1
[    0.004627] CPU topo: Max. logical dies:       1
[    0.004627] CPU topo: Max. dies per package:   1
[    0.004630] CPU topo: Max. threads per core:   1
[    0.004631] CPU topo: Num. cores per package:     4
[    0.004631] CPU topo: Num. threads per package:   4
[    0.004632] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.004641] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.004653] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.004654] Booting paravirtualized kernel on KVM
[    0.004655] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.004658] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.004820] percpu: Embedded 54 pages/cpu s180760 r8192 d32232 u524288
[    0.004841] Kernel command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.004897] random: crng init done
[    0.004897] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[    0.004913] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.004922] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.004949] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.005106] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.005476] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.014423] ftrace: allocating 55812 entries in 220 pages
[    0.014425] ftrace: allocated 220 pages with 5 groups
[    0.014448] Dynamic Preempt: full
[    0.014563] rcu: Preemptible hierarchical RCU implementation.
[    0.014564] rcu: 	RCU event tracing is enabled.
[    0.014564] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.014565] 	All grace periods are expedited (rcu_expedited).
[    0.014565] 	Trampoline variant of Tasks RCU enabled.
[    0.014566] 	Rude variant of Tasks RCU enabled.
[    0.014566] 	Tracing variant of Tasks RCU enabled.
[    0.014566] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.014567] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.014571] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014572] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.014573] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.019359] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.019530] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.019588] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.027527] Console: colour VGA+ 80x25
[    0.027584] printk: legacy console [ttyS0] enabled
[    0.256214] ACPI: Core revision 20250807
[    0.257646] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.260658] APIC: Switch to symmetric I/O mode setup
[    0.262416] x2apic enabled
[    0.263555] APIC: Switched APIC routing to: physical x2apic
[    0.266289] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.268243] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.271624] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.272774] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.273626] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.274628] mitigations: Enabled attack vectors: user_kernel, user_user, SMT mitigations: auto
[    0.275626] Speculative Store Bypass: Vulnerable
[    0.276632] Spectre V2 : Mitigation: Retpolines
[    0.277626] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.278626] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.279640] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.281625] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.282627] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.283627] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.284626] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.303879] Freeing SMP alternatives memory: 60K
[    0.304628] pid_max: default: 32768 minimum: 301
[    0.305645] LSM: initializing lsm=capability,landlock
[    0.306651] landlock: Up and running.
[    0.307645] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.308628] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.309875] smpboot: CPU0: AMD Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.310763] Performance Events: AMD PMU driver.
[    0.311632] ... version:                   0
[    0.312629] ... bit width:                 48
[    0.313628] ... generic counters:          4
[    0.314628] ... generic bitmap:            000000000000000f
[    0.315628] ... fixed-purpose counters:    0
[    0.316628] ... fixed-purpose bitmap:      0000000000000000
[    0.317630] ... value mask:                0000ffffffffffff
[    0.318629] ... max period:                00007fffffffffff
[    0.319632] ... global_ctrl mask:          000000000000000f
[    0.320707] signal: max sigframe size: 1776
[    0.321657] rcu: Hierarchical SRCU implementation.
[    0.322629] rcu: 	Max phase no-delay instances is 400.
[    0.323660] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.324748] smp: Bringing up secondary CPUs ...
[    0.325695] smpboot: x86: Booting SMP configuration:
[    0.326634] .... node  #0, CPUs:      #1 #2 #3
[    0.361667] smp: Brought up 1 node, 4 CPUs
[    0.363630] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.365044] Memory: 467656K/523736K available (20951K kernel code, 2462K rwdata, 6208K rodata, 3672K init, 1856K bss, 51788K reserved, 0K cma-reserved)
[    0.365871] devtmpfs: initialized
[    0.366785] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.367633] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.368654] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[    0.369659] pinctrl core: initialized pinctrl subsystem
[    0.371453] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.371728] thermal_sys: Registered thermal governor 'step_wise'
[    0.371737] cpuidle: using governor menu
[    0.373834] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.374630] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.375636] PCI: Using configuration type 1 for base access
[    0.376673] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.394626] raid6: avx2x4   gen() 55209 MB/s
[    0.412627] raid6: avx2x2   gen() 58223 MB/s
[    0.430628] raid6: avx2x1   gen() 48231 MB/s
[    0.431629] raid6: using algorithm avx2x2 gen() 58223 MB/s
[    0.449626] raid6: .... xor() 38425 MB/s, rmw enabled
[    0.450629] raid6: using avx2x2 recovery algorithm
[    0.451696] ACPI: Added _OSI(Module Device)
[    0.452630] ACPI: Added _OSI(Processor Device)
[    0.453629] ACPI: Added _OSI(Processor Aggregator Device)
[    0.455335] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.456711] ACPI: Interpreter enabled
[    0.457639] ACPI: PM: (supports S0 S3 S5)
[    0.458629] ACPI: Using IOAPIC for interrupt routing
[    0.459649] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.460629] PCI: Using E820 reservations for host bridge windows
[    0.461703] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.464450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.464633] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.465664] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.466677] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.467672] PCI host bridge to bus 0000:00
[    0.468632] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.469630] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.470630] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.471631] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.472629] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.473630] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.474629] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.475699] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.477392] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    0.479155] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[    0.479654] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[    0.480678] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.481699] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.483068] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.484642] pci 0000:00:02.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.485642] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.486678] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]
[    0.487642] pci 0000:00:02.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.489653] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.491642] pci 0000:00:03.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.492642] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[    0.493678] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]
[    0.495677] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.498211] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.498643] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.499677] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]
[    0.501787] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.503424] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.503887] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.505399] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.505886] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.507392] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.507937] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.509364] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.509946] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.511318] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.511982] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.513629] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.514642] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.516163] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.517409] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.520776] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.521733] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.522730] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.523730] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.524731] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.525731] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.526731] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.527731] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.528676] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.529639] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.530638] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.531654] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.532639] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.533638] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.534639] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.535638] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.536965] iommu: Default domain type: Translated
[    0.537629] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.538666] SCSI subsystem initialized
[    0.539654] ACPI: bus type USB registered
[    0.540643] usbcore: registered new interface driver usbfs
[    0.541635] usbcore: registered new interface driver hub
[    0.542636] usbcore: registered new device driver usb
[    0.543641] pps_core: LinuxPPS API ver. 1 registered
[    0.544628] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.545632] PTP clock support registered
[    0.546756] Bluetooth: Core ver 2.22
[    0.547637] NET: Registered PF_BLUETOOTH protocol family
[    0.548628] Bluetooth: HCI device and connection manager initialized
[    0.549630] Bluetooth: HCI socket layer initialized
[    0.550629] Bluetooth: L2CAP socket layer initialized
[    0.551632] Bluetooth: SCO socket layer initialized
[    0.552657] PCI: Using ACPI for IRQ routing
[    0.649951] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.650624] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.650624] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.650632] vgaarb: loaded
[    0.651553] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.651628] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.656676] clocksource: Switched to clocksource kvm-clock
[    0.658779] pnp: PnP ACPI init
[    0.659889] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.662505] pnp: PnP ACPI: found 5 devices
[    0.670162] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.673061] NET: Registered PF_INET protocol family
[    0.674672] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.677142] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.679846] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.682326] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.684838] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.687161] TCP: Hash tables configured (established 4096 bind 4096)
[    0.689356] UDP hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.691533] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.693840] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.695888] RPC: Registered named UNIX socket transport module.
[    0.697812] RPC: Registered udp transport module.
[    0.699328] RPC: Registered tcp transport module.
[    0.700860] RPC: Registered tcp-with-tls transport module.
[    0.702628] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.704736] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.706736] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.708739] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.710949] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.713170] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.715380] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.717878] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.719921] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.721977] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.724005] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.726172] PCI: CLS 0 bytes, default 64
[    0.727581] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.731562] Initialise system trusted keyrings
[    0.733102] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.735313] NFS: Registering the id_resolver key type
[    0.736960] Key type id_resolver registered
[    0.738319] Key type id_legacy registered
[    0.740058] Key type cifs.idmap registered
[    0.748157] xor: automatically using best checksumming function   avx       
[    0.750445] Key type asymmetric registered
[    0.751789] Asymmetric key parser 'x509' registered
[    0.753377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.755757] io scheduler mq-deadline registered
[    0.757232] io scheduler kyber registered
[    0.758551] io scheduler bfq registered
[    0.760109] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.766108] ACPI: button: Power Button [PWRF]
[    0.768123] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.771164] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.774028] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.776958] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.779219] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.781891] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.785647] Linux agpgart interface v0.103
[    0.787033] ACPI: bus type drm_connector registered
[    0.788649] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
[    0.794573] Console: switching to colour dummy device 80x25
[    0.796475] [drm] Found bochs VGA, ID 0xb0c5.
[    0.797923] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[    0.800377] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
[    0.805312] fbcon: bochs-drmdrmfb (fb0) is primary device
[    0.811695] Console: switching to colour frame buffer device 160x50
[    0.816035] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    0.819829] brd: module loaded
[    0.821410] loop: module loaded
[    0.822634] virtio_blk virtio2: 4/0/0 default/read/poll queues
[    0.826120] virtio_blk virtio2: [vda] 1423472 512-byte logical blocks (729 MB/695 MiB)
[    0.830699] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.833339] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.835429] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.838196] scsi host0: ahci
[    0.839297] scsi host1: ahci
[    0.840395] scsi host2: ahci
[    0.841475] scsi host3: ahci
[    0.842572] scsi host4: ahci
[    0.843660] scsi host5: ahci
[    0.844652] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 31 lpm-pol 1
[    0.847320] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 31 lpm-pol 1
[    0.850004] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 31 lpm-pol 1
[    0.852704] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 31 lpm-pol 1
[    0.855360] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 31 lpm-pol 1
[    0.858042] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 31 lpm-pol 1
[    0.862429] e100: Intel(R) PRO/100 Network Driver
[    0.864084] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.865889] e1000: Intel(R) PRO/1000 Network Driver
[    0.867463] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.869334] e1000e: Intel(R) PRO/1000 Network Driver
[    0.870945] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.872880] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.874634] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.877212] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.879601] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.882126] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.884225] hub 1-0:1.0: USB hub found
[    0.885466] hub 1-0:1.0: 2 ports detected
[    0.887334] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.891591] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.898126] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.908224] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.913069] hub 2-0:1.0: USB hub found
[    0.916114] hub 2-0:1.0: 6 ports detected
[    0.940441] hub 1-0:1.0: USB hub found
[    0.943808] hub 1-0:1.0: 2 ports detected
[    0.947206] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.949119] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.951922] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.954169] hub 3-0:1.0: USB hub found
[    0.955545] hub 3-0:1.0: 2 ports detected
[    0.957750] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.959650] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.962580] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.964850] hub 4-0:1.0: USB hub found
[    0.966263] hub 4-0:1.0: 2 ports detected
[    0.967912] usbcore: registered new interface driver usb-storage
[    0.970276] usbcore: registered new interface driver usbserial_generic
[    0.972715] usbserial: USB Serial support registered for generic
[    0.974933] usbcore: registered new interface driver ftdi_sio
[    0.977020] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.979716] usbcore: registered new interface driver pl2303
[    0.981743] usbserial: USB Serial support registered for pl2303
[    0.983943] i8042: PNP: No PS/2 controller found.
[    0.985824] mousedev: PS/2 mouse device common for all mice
[    0.987970] rtc_cmos 00:03: RTC can wake from S4
[    0.990101] rtc_cmos 00:03: registered as rtc0
[    0.991656] rtc_cmos 00:03: setting system clock to 2026-05-27T23:25:09 UTC (1779924309)
[    0.994384] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.997012] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    0.997793] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.999976] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    1.004840] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    1.007028] sdhci: Secure Digital Host Controller Interface driver
[    1.014922] sdhci: Copyright(c) Pierre Ossman
[    1.016373] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.018263] usbcore: registered new interface driver usbhid
[    1.020077] usbhid: USB HID core driver
[    1.021352] u32 classifier
[    1.022237]     input device check on
[    1.023433]     Actions configured
[    1.024640] NET: Registered PF_INET6 protocol family
[    1.026461] Segment Routing with IPv6
[    1.027668] In-situ OAM (IOAM) with IPv6
[    1.028970] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.030970] NET: Registered PF_PACKET protocol family
[    1.032624] Bridge firewalling registered
[    1.033941] l2tp_core: L2TP core driver, V2.0
[    1.035363] Key type dns_resolver registered
[    1.036796] NET: Registered PF_VSOCK protocol family
[    1.038698] IPI shorthand broadcast: enabled
[    1.041009] sched_clock: Marking stable (793013140, 247088810)->(1214265500, -174163550)
[    1.043804] registered taskstats version 1
[    1.045159] Loading compiled-in X.509 certificates
[    1.047468] Key type .fscrypt registered
[    1.048760] Key type fscrypt-provisioning registered
[    1.050636] Btrfs loaded, zoned=no, fsverity=no
[    1.052690] Key type encrypted registered
[    1.054082] netconsole: network logging started
[    1.162129] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.167923] ata4: SATA link down (SStatus 0 SControl 300)
[    1.172665] ata1: SATA link down (SStatus 0 SControl 300)
[    1.174911] ata5: SATA link down (SStatus 0 SControl 300)
[    1.177222] ata2: SATA link down (SStatus 0 SControl 300)
[    1.181942] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.184425] ata6: SATA link down (SStatus 0 SControl 300)
[    1.189189] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.191017] ata3.00: applying bridge limits
[    1.192541] ata3.00: configured for UDMA/100
[    1.194398] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.215389] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.220759] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.244111] IP-Config: Complete:
[    1.245200]      device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7
[    1.248370]      host=192.168.7.8, domain=, nis-domain=(none)
[    1.250196]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.250197]      nameserver0=8.8.8.8
[    1.253825] clk: Disabling unused clocks
[    1.255486] md: Waiting for all devices to be available before autodetect
[    1.257216] md: If you don't use raid, use raid=noautodetect
[    1.258672] md: Autodetecting RAID arrays.
[    1.259723] md: autorun ...
[    1.260476] md: ... autorun DONE.
[    1.263710] EXT4-fs (vda): mounted filesystem d87cfd14-70d9-407b-ba91-79aeaa7a7ab4 r/w with ordered data mode. Quota mode: disabled.
[    1.266739] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.268370] devtmpfs: mounted
[    1.269732] Freeing unused kernel image (initmem) memory: 3672K
[    1.271274] Write protecting the kernel read-only data: 30720k
[    1.273021] Freeing unused kernel image (text/rodata gap) memory: 1576K
[    1.274903] Freeing unused kernel image (rodata/data gap) memory: 1984K
[    1.276593] Run /sbin/init as init process
INIT: version 3.14 booting
[    1.296778] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.296892] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.344646] udevd[150]: starting version 3.2.14
[    1.348494] udevd[151]: starting eudev-3.2.14
[    1.410117] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.545938] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.604721] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.674788] EXT4-fs (vda): re-mounted d87cfd14-70d9-407b-ba91-79aeaa7a7ab4.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus[339]: Unknown username "pipewire" in message bus configuration file
dbus.
00:00:00.000 [1;34m [9.3/seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [9.3/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.124 [1;34m [9.3/seatd/server.c:145] New client connected (pid: 355, uid: 1000, gid: 1000)[0m
00:00:00.124 [1;34m [9.3/seatd/seat.c:248] Added client 2 to seat0[0m
00:00:00.124 [1;34m [9.3/seatd/seat.c:584] Opened client 2 on seat0[0m
pci id for fd 15: 1234:1111, driver (null)
pci id for fd 16: 1234:1111, driver (null)
pci id for fd 17: 1234:1111, driver (null)
pci id for fd 16: 1234:1111, driver (null)
pci id for fd 17: 1234:1111, driver (null)
could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-none'
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDro47pb3d2Aj6LKo4VZaO97J6dhEtlvuX/f9GTRaN7lHysxMrlojOKz1jzewHwUManlv9xxDs4v+DkSprCtGOKBGf//eP9njnIaL3jd6n4ZYtRNDpK/jVqQ9ou4F8FuSR19blpPObWdaet5y5uMLj3/4aBfBEErQdwVSKoN69MXDsj65qeF00LHRyB9wgCKhGEDZlKZQUgXb90LbFHfnnHuf6eoWCmdXnYbE6gtvYuTV6AcrrmCIQi6l3uLRVd77ksTXrKzeE5a40cGaZC7qdqgiELzAMvgTuQQtjqfWB2cr+8ZZXExesFw+4NvRrccaatfRwfnj5Ir+5BUcUTINBD root@qemux86-64
Fingerprint: SHA256:5E8vWo5Qt2S8rRPCB1HtfEKcJrmXi/uCkifCyJqidTg
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: [    2.482064] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.483569] Bluetooth: BNEP filters: protocol multicast
[    2.484988] Bluetooth: BNEP socket layer initialized
done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 6.0.99+snapshot-f696173b841aacaeb0afebbf385c7d50be536e7e qemux86-64 /dev/ttyS0

Type 'root' to login with superuser privileges (no password will be asked).

qemux86-64 login: 00:01:11.261 [1;34m [9.3/seatd/server.c:145] New client connected (pid: 5986, uid: 0, gid: 0)[0m
00:01:11.266 [1;31m [9.3/seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:11.267 [1;31m [9.3/seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
