[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000203] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000439] Switching to timer-based delay loop, resolution 16ns [ 0.018364] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.028743] Console: colour dummy device 80x30 [ 0.039429] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.039812] CPU: Testing write buffer coherency: ok [ 0.041788] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.042016] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.042147] pid_max: default: 32768 minimum: 301 [ 0.045866] LSM: initializing lsm=capability,landlock [ 0.046790] landlock: Up and running. [ 0.050991] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051081] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.092552] /cpus/cpu@0 missing clock-frequency property [ 0.093000] /cpus/cpu@1 missing clock-frequency property [ 0.093059] /cpus/cpu@2 missing clock-frequency property [ 0.093104] /cpus/cpu@3 missing clock-frequency property [ 0.093266] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.094199] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.113653] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.115777] rcu: Hierarchical SRCU implementation. [ 0.115832] rcu: Max phase no-delay instances is 1000. [ 0.123328] smp: Bringing up secondary CPUs ... [ 0.127346] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.127856] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.133853] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.134171] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.136574] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.136786] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.137837] smp: Brought up 1 node, 4 CPUs [ 0.137932] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.137998] CPU: All CPU(s) started in SVC mode. [ 0.143380] Memory: 491888K/524288K available (12288K kernel code, 1513K rwdata, 3068K rodata, 2048K init, 347K bss, 28876K reserved, 0K cma-reserved, 0K highmem) [ 0.155820] devtmpfs: initialized [ 0.173384] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.209469] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.210425] posixtimers hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.210754] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear). [ 0.235309] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.247018] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.255316] cpuidle: using governor ladder [ 0.258039] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.258194] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.260038] Serial: AMBA PL011 UART driver [ 0.296599] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.300112] printk: console [ttyAMA0] enabled [ 0.311725] 9040000.pl011: ttyAMA1 at MMIO 0x9040000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.319873] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.501745] raid6: neonx8 gen() 528 MB/s [ 0.675057] raid6: neonx4 gen() 1533 MB/s [ 0.849285] raid6: neonx2 gen() 1490 MB/s [ 1.022709] raid6: neonx1 gen() 956 MB/s [ 1.198876] raid6: int32x8 gen() 140 MB/s [ 1.372687] raid6: int32x4 gen() 148 MB/s [ 1.545331] raid6: int32x2 gen() 262 MB/s [ 1.718421] raid6: int32x1 gen() 488 MB/s [ 1.718716] raid6: using algorithm neonx4 gen() 1533 MB/s [ 1.894222] raid6: .... xor() 821 MB/s, rmw enabled [ 1.894467] raid6: using neon recovery algorithm [ 1.901277] SCSI subsystem initialized [ 1.902971] usbcore: registered new interface driver usbfs [ 1.903701] usbcore: registered new interface driver hub [ 1.904131] usbcore: registered new device driver usb [ 1.905064] pps_core: LinuxPPS API ver. 1 registered [ 1.905192] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.905439] PTP clock support registered [ 1.968002] vgaarb: loaded [ 1.977064] clocksource: Switched to clocksource arch_sys_counter [ 2.049105] NET: Registered PF_INET protocol family [ 2.050755] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.060582] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.060836] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.061090] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.061355] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.061541] TCP: Hash tables configured (established 4096 bind 4096) [ 2.062696] UDP hash table entries: 256 (order: 2, 14336 bytes, linear) [ 2.063022] UDP-Lite hash table entries: 256 (order: 2, 14336 bytes, linear) [ 2.065119] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.070207] RPC: Registered named UNIX socket transport module. [ 2.070355] RPC: Registered udp transport module. [ 2.070446] RPC: Registered tcp transport module. [ 2.070504] RPC: Registered tcp-with-tls transport module. [ 2.070525] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.070671] PCI: CLS 0 bytes, default 64 [ 2.080431] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.088750] NFS: Registering the id_resolver key type [ 2.089209] Key type id_resolver registered [ 2.089253] Key type id_legacy registered [ 2.110184] Key type cifs.idmap registered [ 2.116536] cryptd: max_cpu_qlen set to 1000 [ 2.335634] xor: measuring software checksum speed [ 2.340734] arm4regs : 691 MB/sec [ 2.344314] 8regs : 978 MB/sec [ 2.348337] 32regs : 860 MB/sec [ 2.351310] neon : 1183 MB/sec [ 2.351532] xor: using function: neon (1183 MB/sec) [ 2.351669] async_tx: api initialized (async) [ 2.352852] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.353801] io scheduler mq-deadline registered [ 2.354075] io scheduler kyber registered [ 2.359753] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 2.360747] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 2.361706] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 2.362916] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 2.365431] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 2.366714] pci_bus 0000:00: root bus resource [bus 00-0f] [ 2.367704] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.367882] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 2.370372] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint [ 2.376742] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 2.377407] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] [ 2.378500] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] [ 2.378659] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.381208] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint [ 2.381456] pci 0000:00:02.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 2.383094] pci 0000:00:02.0: enabling Extended Tags [ 2.384787] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint [ 2.385700] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] [ 2.385841] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.389832] PCI: bus0: Fast back to back transfers disabled [ 2.392438] pci 0000:00:01.0: BAR 4 [mem 0x10000000-0x10003fff 64bit pref]: assigned [ 2.393690] pci 0000:00:02.0: BAR 0 [mem 0x10004000-0x10007fff 64bit]: assigned [ 2.393864] pci 0000:00:03.0: BAR 4 [mem 0x10008000-0x1000bfff 64bit pref]: assigned [ 2.393922] pci 0000:00:01.0: BAR 1 [mem 0x1000c000-0x1000cfff]: assigned [ 2.394196] pci 0000:00:03.0: BAR 1 [mem 0x1000d000-0x1000dfff]: assigned [ 2.394644] pci 0000:00:01.0: BAR 0 [io 0x1000-0x101f]: assigned [ 2.396069] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 2.398044] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] [ 2.400324] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 2.413409] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 2.418773] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 2.580979] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 2.580988] printk: legacy console [hvc0] enabled [ 2.582371] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.613079] [drm] features: -context_init [ 2.619385] [drm] number of scanouts: 1 [ 2.620438] [drm] number of cap sets: 0 [ 2.637939] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0 [ 2.732501] Console: switching to colour frame buffer device 160x50 [ 2.745105] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.809208] brd: module loaded [ 2.811028] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 2.817014] virtio_blk virtio1: [vda] 948088 512-byte logical blocks (485 MB/463 MiB) [ 2.845485] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.848027] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.871107] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 2.878604] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.879893] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.880523] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 2.894555] hub 1-0:1.0: USB hub found [ 2.896848] hub 1-0:1.0: 4 ports detected [ 2.904955] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.910600] hub 2-0:1.0: USB hub found [ 2.915878] hub 2-0:1.0: 4 ports detected [ 2.945073] rtc-pl031 9010000.pl031: registered as rtc0 [ 2.948423] rtc-pl031 9010000.pl031: setting system clock to 2026-06-18T00:55:13 UTC (1781744113) [ 2.956393] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev [ 2.964934] usbcore: registered new interface driver usbhid [ 2.966794] usbhid: USB HID core driver [ 2.968480] u32 classifier [ 2.968979] input device check on [ 2.970666] Actions configured [ 2.975275] NET: Registered PF_INET6 protocol family [ 2.988477] Segment Routing with IPv6 [ 2.990006] In-situ OAM (IOAM) with IPv6 [ 2.992135] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.998392] NET: Registered PF_PACKET protocol family [ 3.000409] Bridge firewalling registered [ 3.002727] l2tp_core: L2TP core driver, V2.0 [ 3.003827] Key type dns_resolver registered [ 3.006316] NET: Registered PF_VSOCK protocol family [ 3.009300] Registering SWP/SWPB emulation handler [ 3.047416] registered taskstats version 1 [ 3.084265] Key type .fscrypt registered [ 3.085277] Key type fscrypt-provisioning registered [ 3.091077] Btrfs loaded, zoned=no, fsverity=no [ 3.093859] Key type encrypted registered [ 3.096933] netconsole: network logging started [ 3.137180] IP-Config: Complete: [ 3.137685] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 3.139355] host=192.168.7.6, domain=, nis-domain=(none) [ 3.140868] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.141151] nameserver0=8.8.8.8 [ 3.145613] clk: Disabling unused clocks [ 3.151649] md: Waiting for all devices to be available before autodetect [ 3.152110] md: If you don't use raid, use raid=noautodetect [ 3.153550] md: Autodetecting RAID arrays. [ 3.154187] md: autorun ... [ 3.154547] md: ... autorun DONE. [ 3.189238] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 3.392776] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 3.400486] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 3.429288] EXT4-fs (vda): mounted filesystem 1cc1a37d-9c94-4eac-ba85-5155e00faf8c r/w with ordered data mode. Quota mode: disabled. [ 3.434206] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.438463] devtmpfs: mounted [ 3.606714] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 3.693369] Freeing unused kernel image (initmem) memory: 2048K [ 3.880301] Run /sbin/init as init process [ 3.908001] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 3.968408] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 INIT: version 3.14 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 5.984225] udevd[116]: starting version 3.2.14 [ 6.131992] udevd[117]: starting eudev-3.2.14 [ 9.198851] EXT4-fs (vda): re-mounted 1cc1a37d-9c94-4eac-ba85-5155e00faf8c. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus[457]: Unknown username "pipewire" in message bus configuration file dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.23 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.18.35-yocto-standard #1 SMP PREEMPT Wed Jun 10 16:00:30 UTC 2026 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.46.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 18 00:55:25 2026 (==) Using config directory: "/etc/X11/xorg.conf.d" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 6.0.99+snapshot-9389d75ddb85019835a99e58d01d773d54730b66 qemuarm /dev/hvc0 Type 'root' to login with superuser privileges (no password will be asked). qemuarm login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Multiple symbols for level 1/group 1 on key > Using F23, ignoring XF86TouchpadOff > Warning: Symbol map for key redefined > Using last definition for conflicting fields > Warning: Symbol map for key redefined > Using last definition for conflicting fields Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-lE9aGQ12hc,guid=02d686a034280d44c09cd2726a334209 Using calibration data stored in /etc/pointercal.xinput /usr/bin/start-pulseaudio-x11: line 41: /usr/bin/pactl: No such file or directory Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[595]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=578 comm="connman-applet") dbus-daemon[595]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry