[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.18.35-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 16.1.0, GNU ld (GNU Binutils) 2.46.1) #1 PREEMPT Wed Jun 10 16:00:30 UTC 2026
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: ARM Versatile PB
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65536
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 45604 entries in 134 pages
[    0.000000] ftrace: allocated 134 pages with 3 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41
[    0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000131] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000444] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.006056] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.008655] Console: colour dummy device 80x30
[    0.013067] Calibrating delay loop... 1797.32 BogoMIPS (lpj=8986624)
[    0.069519] CPU: Testing write buffer coherency: ok
[    0.070742] pid_max: default: 32768 minimum: 301
[    0.072766] LSM: initializing lsm=capability,landlock
[    0.073284] landlock: Up and running.
[    0.075997] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.076059] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.112983] Setting up static identity map for 0x8400 - 0x8458
[    0.115744] rcu: Hierarchical SRCU implementation.
[    0.115781] rcu: 	Max phase no-delay instances is 1000.
[    0.122911] Memory: 237652K/262144K available (11667K kernel code, 1526K rwdata, 3172K rodata, 512K init, 323K bss, 22408K reserved, 0K cma-reserved)
[    0.130390] devtmpfs: initialized
[    0.142570] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[    0.145065] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.145209] posixtimers hash table entries: 512 (order: 0, 2048 bytes, linear)
[    0.145343] futex hash table entries: 256 (4096 bytes on 1 NUMA nodes, total 4 KiB, linear).
[    0.152319] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.155311] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.166212] /bridge: Fixed dependency cycle(s) with /vga
[    0.166893] /vga: Fixed dependency cycle(s) with /bridge
[    0.174786] /amba/display@10120000: Fixed dependency cycle(s) with /bridge
[    0.174998] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.175163] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.178373] /bridge: Fixed dependency cycle(s) with /amba/display@10120000
[    0.178544] /amba/display@10120000: Fixed dependency cycle(s) with /bridge
[    0.178687] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.181590] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.182109] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.182509] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.182675] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.186203] Serial: AMBA PL011 UART driver
[    0.194295] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.196102] printk: console [ttyAMA0] enabled
[    0.241836] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1
[    0.243602] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1
[    0.244879] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
[    0.245708] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1
[    0.248070] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.599433] raid6: int32x8  gen()   136 MB/s
[    0.939393] raid6: int32x4  gen()   243 MB/s
[    1.279483] raid6: int32x2  gen()   737 MB/s
[    1.619394] raid6: int32x1  gen()   733 MB/s
[    1.619489] raid6: using algorithm int32x2 gen() 737 MB/s
[    1.800801] raid6: .... xor() 112 MB/s, rmw enabled
[    1.800884] raid6: using intx1 recovery algorithm
[    1.803536] SCSI subsystem initialized
[    1.804744] usbcore: registered new interface driver usbfs
[    1.805030] usbcore: registered new interface driver hub
[    1.805214] usbcore: registered new device driver usb
[    1.807727] pps_core: LinuxPPS API ver. 1 registered
[    1.807752] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.807825] PTP clock support registered
[    1.813493] Advanced Linux Sound Architecture Driver Initialized.
[    1.825324] vgaarb: loaded
[    1.827091] clocksource: Switched to clocksource arm,sp804
[    1.869404] NET: Registered PF_INET protocol family
[    1.870513] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.876398] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    1.876487] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.876562] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.876728] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    1.876873] TCP: Hash tables configured (established 2048 bind 2048)
[    1.881556] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.881748] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.883088] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.886103] RPC: Registered named UNIX socket transport module.
[    1.886162] RPC: Registered udp transport module.
[    1.886177] RPC: Registered tcp transport module.
[    1.886187] RPC: Registered tcp-with-tls transport module.
[    1.886196] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.886288] PCI: CLS 0 bytes, default 32
[    1.891035] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.898311] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.902374] NFS: Registering the id_resolver key type
[    1.902663] Key type id_resolver registered
[    1.902692] Key type id_legacy registered
[    1.906680] Key type cifs.idmap registered
[    2.044704] xor: measuring software checksum speed
[    2.046837]    arm4regs        :  1618 MB/sec
[    2.049540]    8regs           :  1808 MB/sec
[    2.051396]    32regs          :  1807 MB/sec
[    2.051437] xor: using function: 8regs (1808 MB/sec)
[    2.051875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.051997] io scheduler mq-deadline registered
[    2.052076] io scheduler kyber registered
[    2.052363] io scheduler bfq registered
[    2.062311] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered
[    2.063303] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered
[    2.064256] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered
[    2.065076] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered
[    2.074652] leds-syscon 10000008.0.led: registered LED (null)
[    2.075791] leds-syscon 10000008.1.led: registered LED (null)
[    2.076649] leds-syscon 10000008.2.led: registered LED (null)
[    2.078916] leds-syscon 10000008.3.led: registered LED (null)
[    2.079304] leds-syscon 10000008.4.led: registered LED (null)
[    2.079601] leds-syscon 10000008.5.led: registered LED (null)
[    2.079881] leds-syscon 10000008.6.led: registered LED (null)
[    2.080143] leds-syscon 10000008.7.led: registered LED (null)
[    2.081295] ledtrig-cpu: registered to indicate activity on CPUs
[    2.081993] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges:
[    2.082430] versatile-pci 10001000.pci:       IO 0x0043000000..0x004300ffff -> 0x0000000000
[    2.082831] versatile-pci 10001000.pci:      MEM 0x0050000000..0x005fffffff -> 0x0050000000
[    2.082880] versatile-pci 10001000.pci:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
[    2.083766] versatile-pci 10001000.pci: PCI core found (slot 11)
[    2.084988] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00
[    2.085227] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.085545] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.085571] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff]
[    2.085592] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref]
[    2.095645] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint
[    2.096366] pci 0000:00:0c.0: BAR 0 [io  0x0000-0x00ff]
[    2.096455] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x000003ff]
[    2.096472] pci 0000:00:0c.0: BAR 2 [mem 0x00000000-0x00001fff]
[    2.101278] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    2.101346] pci 0000:00:0d.0: BAR 0 [io  0x0000-0x001f]
[    2.101366] pci 0000:00:0d.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.101409] pci 0000:00:0d.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.101434] pci 0000:00:0d.0: ROM [mem 0x00000000-0x0003ffff pref]
[    2.101899] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.101951] pci 0000:00:0e.0: BAR 0 [io  0x0000-0x001f]
[    2.101967] pci 0000:00:0e.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.101983] pci 0000:00:0e.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.102367] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint
[    2.102414] pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.102783] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    2.102830] pci 0000:00:10.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.102847] pci 0000:00:10.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.103244] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    2.103291] pci 0000:00:11.0: BAR 0 [io  0x0000-0x007f]
[    2.103307] pci 0000:00:11.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.103323] pci 0000:00:11.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.104290] PCI: bus0: Fast back to back transfers disabled
[    2.105495] pci 0000:00:0d.0: ROM [mem 0x60000000-0x6003ffff pref]: assigned
[    2.105679] pci 0000:00:0d.0: BAR 4 [mem 0x60040000-0x60043fff 64bit pref]: assigned
[    2.105810] pci 0000:00:0e.0: BAR 4 [mem 0x60044000-0x60047fff 64bit pref]: assigned
[    2.105849] pci 0000:00:0f.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned
[    2.105871] pci 0000:00:10.0: BAR 4 [mem 0x60048000-0x6004bfff 64bit pref]: assigned
[    2.105892] pci 0000:00:11.0: BAR 4 [mem 0x6004c000-0x6004ffff 64bit pref]: assigned
[    2.105914] pci 0000:00:0c.0: BAR 2 [mem 0x50004000-0x50005fff]: assigned
[    2.105934] pci 0000:00:0d.0: BAR 1 [mem 0x50006000-0x50006fff]: assigned
[    2.105951] pci 0000:00:0e.0: BAR 1 [mem 0x50007000-0x50007fff]: assigned
[    2.105967] pci 0000:00:10.0: BAR 1 [mem 0x50008000-0x50008fff]: assigned
[    2.105983] pci 0000:00:11.0: BAR 1 [mem 0x50009000-0x50009fff]: assigned
[    2.105999] pci 0000:00:0c.0: BAR 1 [mem 0x5000a000-0x5000a3ff]: assigned
[    2.106025] pci 0000:00:0c.0: BAR 0 [io  0x1000-0x10ff]: assigned
[    2.106053] pci 0000:00:11.0: BAR 0 [io  0x1400-0x147f]: assigned
[    2.106069] pci 0000:00:0d.0: BAR 0 [io  0x1480-0x149f]: assigned
[    2.106085] pci 0000:00:0e.0: BAR 0 [io  0x14a0-0x14bf]: assigned
[    2.106323] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    2.106340] pci_bus 0000:00: resource 5 [mem 0x50000000-0x5fffffff]
[    2.106354] pci_bus 0000:00: resource 6 [mem 0x60000000-0x6fffffff pref]
[    2.126695] pci 0000:00:0f.0: enabling device (0100 -> 0102)
[    2.129996] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103)
[    2.132248] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103)
[    2.133479] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102)
[    2.134876] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103)
[    2.139921] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.151525] random: crng init done
[    2.153596] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0
[    2.154040] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.154058] [drm] features: -context_init
[    2.154460] [drm] number of scanouts: 1
[    2.154489] [drm] number of cap sets: 0
[    2.167750] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:10.0 on minor 0
[    2.236879] Console: switching to colour frame buffer device 160x50
[    2.263858] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.265567] versatile-tft-panel 10000000.sysreg:display@0: no panel detected
[    2.266900] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.304452] brd: module loaded
[    2.304940] virtio_blk virtio3: 1/0/0 default/read/poll queues
[    2.309365] virtio_blk virtio3: [vda] 1027992 512-byte logical blocks (526 MB/502 MiB)
[    2.322361] physmap-flash 34000000.flash: versatile/realview flash protection
[    2.331388] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff]
[    2.333758] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
[    2.334130] Intel/Sharp Extended Query Table at 0x0031
[    2.335196] Using buffer write method
[    2.375080] smc91x: not found (-19).
[    2.375518] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found
[    2.375686] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000
[    2.402684] rtc-ds1307 0-0068: registered as rtc0
[    2.413733] rtc-ds1307 0-0068: setting system clock to 2026-06-23T13:38:46 UTC (1782221926)
[    2.418249] rtc-pl031 101e8000.rtc: registered as rtc1
[    2.418749] i2c_dev: i2c /dev entries driver
[    2.419523] versatile reboot driver registered
[    2.421165] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    2.426199] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio)
[    2.432689] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio)
[    2.435000] usbcore: registered new interface driver usbhid
[    2.435029] usbhid: USB HID core driver
[    2.456271] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    2.456305] aaci-pl041 10004000.aaci: FIFO 512 entries
[    2.459893] u32 classifier
[    2.459918]     input device check on
[    2.459927]     Actions configured
[    2.462006] NET: Registered PF_INET6 protocol family
[    2.471364] Segment Routing with IPv6
[    2.471542] In-situ OAM (IOAM) with IPv6
[    2.472119] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.474538] NET: Registered PF_PACKET protocol family
[    2.475009] Bridge firewalling registered
[    2.475741] l2tp_core: L2TP core driver, V2.0
[    2.475836] Key type dns_resolver registered
[    2.476366] NET: Registered PF_VSOCK protocol family
[    2.490222] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0
[    2.520301] registered taskstats version 1
[    2.551893] Key type .fscrypt registered
[    2.551929] Key type fscrypt-provisioning registered
[    2.555272] Btrfs loaded, zoned=no, fsverity=no
[    2.565459] Key type encrypted registered
[    2.569912] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.571347] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.571955] netconsole: network logging started
[    2.922257] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2
[    2.926387] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.987806] IP-Config: Complete:
[    2.987873]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    2.988132]      host=192.168.7.4, domain=, nis-domain=(none)
[    2.988167]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.988225]      nameserver0=8.8.8.8
[    2.994971] clk: Disabling unused clocks
[    2.995523] ALSA device list:
[    2.995609]   #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    3.010668] md: Waiting for all devices to be available before autodetect
[    3.010692] md: If you don't use raid, use raid=noautodetect
[    3.010728] md: Autodetecting RAID arrays.
[    3.010753] md: autorun ...
[    3.010778] md: ... autorun DONE.
[    3.183421] EXT4-fs (vda): mounted filesystem 0957331a-06f0-4545-a26c-4dafed24d17b r/w with ordered data mode. Quota mode: disabled.
[    3.183804] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.185499] devtmpfs: mounted
[    3.219701] Freeing unused kernel image (initmem) memory: 512K
[    3.219748] Kernel memory protection not selected by kernel config.
[    3.219964] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    4.714369] udevd[110]: starting version 3.2.14
[    4.824708] udevd[111]: starting eudev-3.2.14
[   10.118181] EXT4-fs (vda): re-mounted 0957331a-06f0-4545-a26c-4dafed24d17b.
ALSA: Restoring mixer settings...
alsa-lib /usr/src/debug/alsa-lib/1.2.16.1/src/ucm/main.c:1805:(snd_use_case_mgr_open) failed to import hw:0 use case configuration -2
No state is present for card Interface
alsa-lib /usr/src/debug/alsa-lib/1.2.16.1/src/ucm/main.c:1805:(snd_use_case_mgr_open) failed to import hw:0 use case configuration -2
Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" ""
Hardware is initialized using a generic method
No state is present for card Interface
INIT: Entering runlevel: 5
[   13.288561] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[   13.289303] amba 10100000.smc: deferred probe pending: (reason unknown)
[   13.289342] amba 10110000.mpmc: deferred probe pending: (reason unknown)
[   13.289355] amba 101e0000.sctl: deferred probe pending: (reason unknown)
[   13.289365] amba 101e1000.watchdog: deferred probe pending: (reason unknown)
[   13.289375] amba 101f0000.sci: deferred probe pending: (reason unknown)
[   13.289385] amba 101f4000.spi: deferred probe pending: (reason unknown)
[   13.289395] amba 1000a000.sci: deferred probe pending: (reason unknown)
[   13.289405] amba 10120000.display: deferred probe pending: (reason unknown)
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus[452]: Unknown username "pipewire" in message bus configuration file
dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.23
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarmv5 6.18.35-yocto-standard #1 PREEMPT Wed Jun 10 16:00:30 UTC 2026 armv5tejl
Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
 
Current version of pixman: 0.46.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 23 13:38:58 2026
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 6.0.99+snapshot-10ace5cb9e4b9b323c3f713d3b15b6554681af2f qemuarmv5 /dev/ttyAMA0

Type 'root' to login with superuser privileges (no password will be asked).

qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Multiple symbols for level 1/group 1 on key <FK23>
>                   Using F23, ignoring XF86TouchpadOff
> Warning:          Symbol map for key <FK23> redefined
>                   Using last definition for conflicting fields
> Warning:          Symbol map for key <FK24> redefined
>                   Using last definition for conflicting fields
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-hqoucARVhB,guid=7d2a91b0d3173b76c9cc4f266a3a8c7b
/usr/bin/start-pulseaudio-x11: line 41: /usr/bin/pactl: No such file or directory
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[592]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=567 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[592]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

** (at-spi2-registryd:625): [1;33mWARNING[0m **: [34m13:39:51.344[0m: Disabling unresponsive app with pid 602

** (at-spi2-registryd:625): [1;33mWARNING[0m **: [34m13:40:11.313[0m: Re-enabling app with pid 602
