[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.18.35-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 16.1.0, GNU ld (GNU Binutils) 2.46.1) #1 PREEMPT Wed Jun 10 16:00:30 UTC 2026
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: ARM Versatile PB
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65536
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 45604 entries in 134 pages
[    0.000000] ftrace: allocated 134 pages with 3 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41
[    0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000127] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000411] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.006009] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.008520] Console: colour dummy device 80x30
[    0.012748] Calibrating delay loop... 1856.30 BogoMIPS (lpj=9281536)
[    0.070108] CPU: Testing write buffer coherency: ok
[    0.071293] pid_max: default: 32768 minimum: 301
[    0.073252] LSM: initializing lsm=capability,landlock
[    0.073754] landlock: Up and running.
[    0.075753] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.075797] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.108545] Setting up static identity map for 0x8400 - 0x8458
[    0.111387] rcu: Hierarchical SRCU implementation.
[    0.111422] rcu: 	Max phase no-delay instances is 1000.
[    0.117369] Memory: 237652K/262144K available (11667K kernel code, 1526K rwdata, 3172K rodata, 512K init, 323K bss, 22408K reserved, 0K cma-reserved)
[    0.124644] devtmpfs: initialized
[    0.137281] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[    0.139844] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.139980] posixtimers hash table entries: 512 (order: 0, 2048 bytes, linear)
[    0.140117] futex hash table entries: 256 (4096 bytes on 1 NUMA nodes, total 4 KiB, linear).
[    0.146361] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.149241] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.160285] /bridge: Fixed dependency cycle(s) with /vga
[    0.160944] /vga: Fixed dependency cycle(s) with /bridge
[    0.167737] /amba/display@10120000: Fixed dependency cycle(s) with /bridge
[    0.167945] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.168103] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.171558] /bridge: Fixed dependency cycle(s) with /amba/display@10120000
[    0.171735] /amba/display@10120000: Fixed dependency cycle(s) with /bridge
[    0.171882] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.174502] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.175021] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.175417] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.175583] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.179137] Serial: AMBA PL011 UART driver
[    0.187131] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.188959] printk: console [ttyAMA0] enabled
[    0.229229] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1
[    0.231323] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1
[    0.232599] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
[    0.233422] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1
[    0.235818] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.589471] raid6: int32x8  gen()   139 MB/s
[    0.939442] raid6: int32x4  gen()   243 MB/s
[    1.279581] raid6: int32x2  gen()   725 MB/s
[    1.619436] raid6: int32x1  gen()   722 MB/s
[    1.619544] raid6: using algorithm int32x2 gen() 725 MB/s
[    1.797723] raid6: .... xor() 112 MB/s, rmw enabled
[    1.797805] raid6: using intx1 recovery algorithm
[    1.801376] SCSI subsystem initialized
[    1.802468] usbcore: registered new interface driver usbfs
[    1.802733] usbcore: registered new interface driver hub
[    1.802906] usbcore: registered new device driver usb
[    1.805279] pps_core: LinuxPPS API ver. 1 registered
[    1.805301] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.805371] PTP clock support registered
[    1.807212] Advanced Linux Sound Architecture Driver Initialized.
[    1.821333] vgaarb: loaded
[    1.823081] clocksource: Switched to clocksource arm,sp804
[    1.865376] NET: Registered PF_INET protocol family
[    1.866496] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.872422] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    1.872510] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.872576] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.872740] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    1.872884] TCP: Hash tables configured (established 2048 bind 2048)
[    1.877338] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.877538] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.878840] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.881782] RPC: Registered named UNIX socket transport module.
[    1.881833] RPC: Registered udp transport module.
[    1.881849] RPC: Registered tcp transport module.
[    1.881858] RPC: Registered tcp-with-tls transport module.
[    1.881867] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.881958] PCI: CLS 0 bytes, default 32
[    1.886672] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.892776] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.898045] NFS: Registering the id_resolver key type
[    1.898358] Key type id_resolver registered
[    1.898387] Key type id_legacy registered
[    1.902355] Key type cifs.idmap registered
[    2.040826] xor: measuring software checksum speed
[    2.043759]    arm4regs        :  1414 MB/sec
[    2.045653]    8regs           :  1767 MB/sec
[    2.047557]    32regs          :  1744 MB/sec
[    2.047595] xor: using function: 8regs (1767 MB/sec)
[    2.048082] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.048200] io scheduler mq-deadline registered
[    2.048277] io scheduler kyber registered
[    2.048559] io scheduler bfq registered
[    2.058565] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered
[    2.059565] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered
[    2.060506] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered
[    2.061340] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered
[    2.070616] leds-syscon 10000008.0.led: registered LED (null)
[    2.071778] leds-syscon 10000008.1.led: registered LED (null)
[    2.072627] leds-syscon 10000008.2.led: registered LED (null)
[    2.074754] leds-syscon 10000008.3.led: registered LED (null)
[    2.075138] leds-syscon 10000008.4.led: registered LED (null)
[    2.075448] leds-syscon 10000008.5.led: registered LED (null)
[    2.075732] leds-syscon 10000008.6.led: registered LED (null)
[    2.075999] leds-syscon 10000008.7.led: registered LED (null)
[    2.077129] ledtrig-cpu: registered to indicate activity on CPUs
[    2.077826] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges:
[    2.078253] versatile-pci 10001000.pci:       IO 0x0043000000..0x004300ffff -> 0x0000000000
[    2.078646] versatile-pci 10001000.pci:      MEM 0x0050000000..0x005fffffff -> 0x0050000000
[    2.078694] versatile-pci 10001000.pci:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
[    2.079544] versatile-pci 10001000.pci: PCI core found (slot 11)
[    2.080748] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00
[    2.080982] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.081295] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.081321] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff]
[    2.081343] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref]
[    2.082759] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint
[    2.091687] pci 0000:00:0c.0: BAR 0 [io  0x0000-0x00ff]
[    2.091791] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x000003ff]
[    2.091808] pci 0000:00:0c.0: BAR 2 [mem 0x00000000-0x00001fff]
[    2.095807] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    2.095876] pci 0000:00:0d.0: BAR 0 [io  0x0000-0x001f]
[    2.095895] pci 0000:00:0d.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.095938] pci 0000:00:0d.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.095962] pci 0000:00:0d.0: ROM [mem 0x00000000-0x0003ffff pref]
[    2.096425] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.096476] pci 0000:00:0e.0: BAR 0 [io  0x0000-0x001f]
[    2.096492] pci 0000:00:0e.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.096509] pci 0000:00:0e.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.096884] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint
[    2.096931] pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.097300] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    2.097347] pci 0000:00:10.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.097364] pci 0000:00:10.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.097754] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    2.097801] pci 0000:00:11.0: BAR 0 [io  0x0000-0x007f]
[    2.097816] pci 0000:00:11.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.097833] pci 0000:00:11.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.098766] PCI: bus0: Fast back to back transfers disabled
[    2.100190] pci 0000:00:0d.0: ROM [mem 0x60000000-0x6003ffff pref]: assigned
[    2.100370] pci 0000:00:0d.0: BAR 4 [mem 0x60040000-0x60043fff 64bit pref]: assigned
[    2.100502] pci 0000:00:0e.0: BAR 4 [mem 0x60044000-0x60047fff 64bit pref]: assigned
[    2.100541] pci 0000:00:0f.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned
[    2.100563] pci 0000:00:10.0: BAR 4 [mem 0x60048000-0x6004bfff 64bit pref]: assigned
[    2.100585] pci 0000:00:11.0: BAR 4 [mem 0x6004c000-0x6004ffff 64bit pref]: assigned
[    2.100606] pci 0000:00:0c.0: BAR 2 [mem 0x50004000-0x50005fff]: assigned
[    2.100628] pci 0000:00:0d.0: BAR 1 [mem 0x50006000-0x50006fff]: assigned
[    2.100644] pci 0000:00:0e.0: BAR 1 [mem 0x50007000-0x50007fff]: assigned
[    2.100661] pci 0000:00:10.0: BAR 1 [mem 0x50008000-0x50008fff]: assigned
[    2.100677] pci 0000:00:11.0: BAR 1 [mem 0x50009000-0x50009fff]: assigned
[    2.100693] pci 0000:00:0c.0: BAR 1 [mem 0x5000a000-0x5000a3ff]: assigned
[    2.100719] pci 0000:00:0c.0: BAR 0 [io  0x1000-0x10ff]: assigned
[    2.100746] pci 0000:00:11.0: BAR 0 [io  0x1400-0x147f]: assigned
[    2.100763] pci 0000:00:0d.0: BAR 0 [io  0x1480-0x149f]: assigned
[    2.100779] pci 0000:00:0e.0: BAR 0 [io  0x14a0-0x14bf]: assigned
[    2.101003] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    2.101020] pci_bus 0000:00: resource 5 [mem 0x50000000-0x5fffffff]
[    2.101033] pci_bus 0000:00: resource 6 [mem 0x60000000-0x6fffffff pref]
[    2.102027] pci 0000:00:0f.0: enabling device (0100 -> 0102)
[    2.121928] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103)
[    2.125054] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103)
[    2.126220] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102)
[    2.127523] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103)
[    2.129735] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.143154] random: crng init done
[    2.145136] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0
[    2.145566] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.145584] [drm] features: -context_init
[    2.145881] [drm] number of scanouts: 1
[    2.145907] [drm] number of cap sets: 0
[    2.158270] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:10.0 on minor 0
[    2.217342] Console: switching to colour frame buffer device 160x50
[    2.221309] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.224504] versatile-tft-panel 10000000.sysreg:display@0: no panel detected
[    2.225882] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.262433] brd: module loaded
[    2.262942] virtio_blk virtio3: 1/0/0 default/read/poll queues
[    2.267208] virtio_blk virtio3: [vda] 1028034 512-byte logical blocks (526 MB/502 MiB)
[    2.280660] physmap-flash 34000000.flash: versatile/realview flash protection
[    2.290736] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff]
[    2.293896] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
[    2.294285] Intel/Sharp Extended Query Table at 0x0031
[    2.295099] Using buffer write method
[    2.331151] smc91x: not found (-19).
[    2.331589] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found
[    2.331757] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000
[    2.359335] rtc-ds1307 0-0068: registered as rtc0
[    2.369700] rtc-ds1307 0-0068: setting system clock to 2026-06-28T15:25:25 UTC (1782660325)
[    2.374233] rtc-pl031 101e8000.rtc: registered as rtc1
[    2.374741] i2c_dev: i2c /dev entries driver
[    2.375524] versatile reboot driver registered
[    2.377204] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    2.382117] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio)
[    2.388421] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio)
[    2.390698] usbcore: registered new interface driver usbhid
[    2.390727] usbhid: USB HID core driver
[    2.415107] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    2.415142] aaci-pl041 10004000.aaci: FIFO 512 entries
[    2.416071] u32 classifier
[    2.416095]     input device check on
[    2.416104]     Actions configured
[    2.417987] NET: Registered PF_INET6 protocol family
[    2.428092] Segment Routing with IPv6
[    2.428267] In-situ OAM (IOAM) with IPv6
[    2.428838] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.431269] NET: Registered PF_PACKET protocol family
[    2.431738] Bridge firewalling registered
[    2.432458] l2tp_core: L2TP core driver, V2.0
[    2.432556] Key type dns_resolver registered
[    2.435443] NET: Registered PF_VSOCK protocol family
[    2.447190] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0
[    2.476989] registered taskstats version 1
[    2.508291] Key type .fscrypt registered
[    2.508333] Key type fscrypt-provisioning registered
[    2.511697] Btrfs loaded, zoned=no, fsverity=no
[    2.521841] Key type encrypted registered
[    2.526377] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.527988] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.528619] netconsole: network logging started
[    2.885169] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2
[    2.887140] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.923606] IP-Config: Complete:
[    2.923644]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    2.923788]      host=192.168.7.4, domain=, nis-domain=(none)
[    2.923802]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.923834]      nameserver0=8.8.8.8
[    2.926556] clk: Disabling unused clocks
[    2.926870] ALSA device list:
[    2.926924]   #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    2.931167] md: Waiting for all devices to be available before autodetect
[    2.931186] md: If you don't use raid, use raid=noautodetect
[    2.931227] md: Autodetecting RAID arrays.
[    2.931251] md: autorun ...
[    2.931277] md: ... autorun DONE.
[    3.098995] EXT4-fs (vda): mounted filesystem bae20be5-dcd8-4505-bde0-f20f5835e145 r/w with ordered data mode. Quota mode: disabled.
[    3.099403] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.101109] devtmpfs: mounted
[    3.138005] Freeing unused kernel image (initmem) memory: 512K
[    3.138060] Kernel memory protection not selected by kernel config.
[    3.138386] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    4.640308] udevd[112]: starting version 3.2.14
[    4.751166] udevd[113]: starting eudev-3.2.14
[   10.214392] EXT4-fs (vda): re-mounted bae20be5-dcd8-4505-bde0-f20f5835e145.
ALSA: Restoring mixer settings...
[   13.284537] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[   13.285279] amba 10100000.smc: deferred probe pending: (reason unknown)
[   13.285318] amba 10110000.mpmc: deferred probe pending: (reason unknown)
[   13.285331] amba 101e0000.sctl: deferred probe pending: (reason unknown)
[   13.285341] amba 101e1000.watchdog: deferred probe pending: (reason unknown)
[   13.285352] amba 101f0000.sci: deferred probe pending: (reason unknown)
[   13.285364] amba 101f4000.spi: deferred probe pending: (reason unknown)
[   13.285374] amba 1000a000.sci: deferred probe pending: (reason unknown)
[   13.285386] amba 10120000.display: deferred probe pending: (reason unknown)
alsa-lib /usr/src/debug/alsa-lib/1.2.16.1/src/ucm/main.c:1805:(snd_use_case_mgr_open) failed to import hw:0 use case configuration -2
No state is present for card Interface
alsa-lib /usr/src/debug/alsa-lib/1.2.16.1/src/ucm/main.c:1805:(snd_use_case_mgr_open) failed to import hw:0 use case configuration -2
Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" ""
Hardware is initialized using a generic method
No state is present for card Interface
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus[453]: Unknown username "pipewire" in message bus configuration file
dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.23
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarmv5 6.18.35-yocto-standard #1 PREEMPT Wed Jun 10 16:00:30 UTC 2026 armv5tejl
Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
 
Current version of pixman: 0.46.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 28 15:25:38 2026
Starting rpcbind daemon...(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 6.0.99+snapshot-63e3137bb561928a6fe4b337fa0422336e1918da qemuarmv5 /dev/ttyAMA0

Type 'root' to login with superuser privileges (no password will be asked).

qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Multiple symbols for level 1/group 1 on key <FK23>
>                   Using F23, ignoring XF86TouchpadOff
> Warning:          Symbol map for key <FK23> redefined
>                   Using last definition for conflicting fields
> Warning:          Symbol map for key <FK24> redefined
>                   Using last definition for conflicting fields
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-Qq0hoqiA7P,guid=0d1062497e092c5b9074aa9d6a413cfb
/usr/bin/start-pulseaudio-x11: line 41: /usr/bin/pactl: No such file or directory
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[586]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=566 comm="connman-applet")
dbus-daemon[586]: Successfully activated service 'org.a11y.atspi.Registry'
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

** (at-spi2-registryd:628): [1;33mWARNING[0m **: [34m15:26:30.256[0m: Disabling unresponsive app with pid 601

** (at-spi2-registryd:628): [1;33mWARNING[0m **: [34m15:26:50.224[0m: Re-enabling app with pid 601
