[    1.145736] [drm] number of scanouts: 1
[    1.147414] [drm] number of cap sets: 0
[    1.167788] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:06.0 on minor 0
[    1.240553] Console: switching to colour frame buffer device 160x50
[    1.252421] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    1.284387] brd: module loaded
[    1.285875] virtio_blk virtio2: 4/0/0 default/read/poll queues
[    1.293673] virtio_blk virtio2: [vda] 6794748 512-byte logical blocks (3.48 GB/3.24 GiB)
[    1.309346] xhci_hcd 0000:00:04.0: xHCI Host Controller
[    1.310252] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
[    1.315723] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    1.320385] xhci_hcd 0000:00:04.0: xHCI Host Controller
[    1.321617] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    1.323897] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed
[    1.332638] hub 1-0:1.0: USB hub found
[    1.334170] hub 1-0:1.0: 4 ports detected
[    1.338501] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.341936] hub 2-0:1.0: USB hub found
[    1.343194] hub 2-0:1.0: 4 ports detected
[    1.349584] rtc-pl031 9010000.pl031: registered as rtc0
[    1.351767] rtc-pl031 9010000.pl031: setting system clock to 2026-07-07T23:18:23 UTC (1783466303)
[    1.356623] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    1.367240] usbcore: registered new interface driver usbhid
[    1.368821] usbhid: USB HID core driver
[    1.378640] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available
[    1.383521] u32 classifier
[    1.384335]     input device check on
[    1.385376]     Actions configured
[    1.392486] NET: Registered PF_INET6 protocol family
[    1.407364] Segment Routing with IPv6
[    1.408661] In-situ OAM (IOAM) with IPv6
[    1.410986] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.417055] NET: Registered PF_PACKET protocol family
[    1.420710] Bridge firewalling registered
[    1.423739] l2tp_core: L2TP core driver, V2.0
[    1.425016] Key type dns_resolver registered
[    1.427163] NET: Registered PF_VSOCK protocol family
[    1.447029] registered taskstats version 1
[    1.468634] Key type .fscrypt registered
[    1.468894] Key type fscrypt-provisioning registered
[    1.473382] Btrfs loaded, zoned=no, fsverity=no
[    1.501930] Key type encrypted registered
[    1.504566] netconsole: network logging started
[    1.542727] IP-Config: Complete:
[    1.543121]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    1.544267]      host=192.168.7.6, domain=, nis-domain=(none)
[    1.546182]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.546277]      nameserver0=8.8.8.8
[    1.551742] clk: Disabling unused clocks
[    1.552680] PM: genpd: Disabling unused power domains
[    1.557332] md: Waiting for all devices to be available before autodetect
[    1.558087] md: If you don't use raid, use raid=noautodetect
[    1.560209] md: Autodetecting RAID arrays.
[    1.561056] md: autorun ...
[    1.561188] md: ... autorun DONE.
[    1.595608] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.665570] EXT4-fs (vda): mounted filesystem f4671acc-7dc2-4b07-ac0f-2c8530fd2644 r/w with ordered data mode. Quota mode: disabled.
[    1.669707] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.674779] devtmpfs: mounted
[    1.738303] Freeing unused kernel memory: 1856K
[    1.745731] Run /sbin/init as init process
[    1.769432] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    1.776075] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0
INIT: version 3.14 booting
[    1.898609] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    2.047025] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    2.108200] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    3.036816] udevd[127]: starting version 3.2.14
[    3.097863] udevd[128]: starting eudev-3.2.14
[    3.955219] EXT4-fs (vda): re-mounted f4671acc-7dc2-4b07-ac0f-2c8530fd2644.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting system message bus: dbus[471]: Unknown username "pipewire" in message bus configuration file
dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
  generating ssh ECDSA host key...
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.23
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm64 6.18.35-yocto-standard #1 SMP PREEMPT Wed Jun 10 16:00:30 UTC 2026 aarch64
Kernel command line: root=/dev/vda rw  mem=1024M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.46.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul  7 23:18:31 2026
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[A[74G[ ok ]
Starting Telephony daemon
Starting crond: OK
Starting tcf-agent: OK

Poky (Yocto Project Reference Distro) 6.0.99+snapshot-dbd2e0c0ff927362cd98daf7ef36d84991e25228 qemuarm64 hvc0

Type 'root' to login with superuser privileges (no password will be asked).

qemuarm64 login: The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Multiple symbols for level 1/group 1 on key <FK23>
>                   Using F23, ignoring XF86TouchpadOff
> Warning:          Symbol map for key <FK23> redefined
>                   Using last definition for conflicting fields
> Warning:          Symbol map for key <FK24> redefined
>                   Using last definition for conflicting fields
> Warning:          Could not resolve keysym XF86ElectronicPrivacyScreenOn
> Warning:          Could not resolve keysym XF86ElectronicPrivacyScreenOff
> Warning:          Could not resolve keysym XF86ActionOnSelection
> Warning:          Could not resolve keysym XF86ContextualInsert
> Warning:          Could not resolve keysym XF86ContextualQuery
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-uyHSIUVKL8,guid=3f796f17bb1713a9da2a76c76a4d894a
/usr/bin/start-pulseaudio-x11: line 41: /usr/bin/pactl: No such file or directory
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[695]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=669 comm="connman-applet")
dbus-daemon[695]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0xc00002): BadWindow (invalid Window parameter) (opcode: 12)
[  743.793052] hellomod: loading out-of-tree module taints kernel.
[  743.820170] Hello world!
[  745.644794] Cleaning up hellomod.
