[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.18.35-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 16.1.0, GNU ld (GNU Binutils) 2.46.1) #1 PREEMPT Wed Jun 10 16:00:30 UTC 2026
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: ARM Versatile PB
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65536
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 45604 entries in 134 pages
[    0.000000] ftrace: allocated 134 pages with 3 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41
[    0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000129] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000425] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.005926] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.008477] Console: colour dummy device 80x30
[    0.012733] Calibrating delay loop... 1843.20 BogoMIPS (lpj=9216000)
[    0.069422] CPU: Testing write buffer coherency: ok
[    0.070632] pid_max: default: 32768 minimum: 301
[    0.072597] LSM: initializing lsm=capability,landlock
[    0.073089] landlock: Up and running.
[    0.075085] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.075127] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.108055] Setting up static identity map for 0x8400 - 0x8458
[    0.110945] rcu: Hierarchical SRCU implementation.
[    0.110980] rcu: 	Max phase no-delay instances is 1000.
[    0.116982] Memory: 237652K/262144K available (11667K kernel code, 1526K rwdata, 3172K rodata, 512K init, 323K bss, 22408K reserved, 0K cma-reserved)
[    0.124301] devtmpfs: initialized
[    0.137131] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[    0.139746] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.139889] posixtimers hash table entries: 512 (order: 0, 2048 bytes, linear)
[    0.140028] futex hash table entries: 256 (4096 bytes on 1 NUMA nodes, total 4 KiB, linear).
[    0.146300] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.149167] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.160318] /bridge: Fixed dependency cycle(s) with /vga
[    0.161003] /vga: Fixed dependency cycle(s) with /bridge
[    0.167887] /amba/display@10120000: Fixed dependency cycle(s) with /bridge
[    0.168091] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.168253] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.171712] /bridge: Fixed dependency cycle(s) with /amba/display@10120000
[    0.171892] /amba/display@10120000: Fixed dependency cycle(s) with /bridge
[    0.172039] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.174686] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.175209] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.175608] /amba/display@10120000: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.175776] /amba/fpga/sysreg@0/display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.179524] Serial: AMBA PL011 UART driver
[    0.187467] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.222858] printk: console [ttyAMA0] enabled
[    0.228443] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1
[    0.231457] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1
[    0.232736] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
[    0.233597] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1
[    0.235996] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.589503] raid6: int32x8  gen()   134 MB/s
[    0.939416] raid6: int32x4  gen()   240 MB/s
[    1.279477] raid6: int32x2  gen()   719 MB/s
[    1.619394] raid6: int32x1  gen()   652 MB/s
[    1.619502] raid6: using algorithm int32x2 gen() 719 MB/s
[    1.801788] raid6: .... xor() 109 MB/s, rmw enabled
[    1.801876] raid6: using intx1 recovery algorithm
[    1.804552] SCSI subsystem initialized
[    1.805744] usbcore: registered new interface driver usbfs
[    1.806025] usbcore: registered new interface driver hub
[    1.806203] usbcore: registered new device driver usb
[    1.808711] pps_core: LinuxPPS API ver. 1 registered
[    1.808737] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.808811] PTP clock support registered
[    1.813966] Advanced Linux Sound Architecture Driver Initialized.
[    1.825717] vgaarb: loaded
[    1.827528] clocksource: Switched to clocksource arm,sp804
[    1.870029] NET: Registered PF_INET protocol family
[    1.871172] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.877152] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    1.877241] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.877308] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.880281] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    1.880449] TCP: Hash tables configured (established 2048 bind 2048)
[    1.881208] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.881394] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.882708] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.885765] RPC: Registered named UNIX socket transport module.
[    1.885817] RPC: Registered udp transport module.
[    1.885832] RPC: Registered tcp transport module.
[    1.885842] RPC: Registered tcp-with-tls transport module.
[    1.885851] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.885952] PCI: CLS 0 bytes, default 32
[    1.891846] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.898536] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.902633] NFS: Registering the id_resolver key type
[    1.902954] Key type id_resolver registered
[    1.902983] Key type id_legacy registered
[    1.907055] Key type cifs.idmap registered
[    2.040708] xor: measuring software checksum speed
[    2.042854]    arm4regs        :  1612 MB/sec
[    2.044578]    8regs           :  1937 MB/sec
[    2.046418]    32regs          :  1798 MB/sec
[    2.046455] xor: using function: 8regs (1937 MB/sec)
[    2.046925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.047049] io scheduler mq-deadline registered
[    2.047127] io scheduler kyber registered
[    2.050171] io scheduler bfq registered
[    2.058196] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered
[    2.059275] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered
[    2.060265] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered
[    2.061127] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered
[    2.069864] leds-syscon 10000008.0.led: registered LED (null)
[    2.071675] leds-syscon 10000008.1.led: registered LED (null)
[    2.072778] leds-syscon 10000008.2.led: registered LED (null)
[    2.073168] leds-syscon 10000008.3.led: registered LED (null)
[    2.073484] leds-syscon 10000008.4.led: registered LED (null)
[    2.073758] leds-syscon 10000008.5.led: registered LED (null)
[    2.074020] leds-syscon 10000008.6.led: registered LED (null)
[    2.074290] leds-syscon 10000008.7.led: registered LED (null)
[    2.075433] ledtrig-cpu: registered to indicate activity on CPUs
[    2.076129] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges:
[    2.076560] versatile-pci 10001000.pci:       IO 0x0043000000..0x004300ffff -> 0x0000000000
[    2.076954] versatile-pci 10001000.pci:      MEM 0x0050000000..0x005fffffff -> 0x0050000000
[    2.077002] versatile-pci 10001000.pci:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
[    2.083943] versatile-pci 10001000.pci: PCI core found (slot 11)
[    2.085170] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00
[    2.085409] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.085721] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.085748] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff]
[    2.085769] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref]
[    2.087188] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint
[    2.091465] pci 0000:00:0c.0: BAR 0 [io  0x0000-0x00ff]
[    2.091567] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x000003ff]
[    2.091584] pci 0000:00:0c.0: BAR 2 [mem 0x00000000-0x00001fff]
[    2.094106] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    2.094166] pci 0000:00:0d.0: BAR 0 [io  0x0000-0x001f]
[    2.094184] pci 0000:00:0d.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.094224] pci 0000:00:0d.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.094250] pci 0000:00:0d.0: ROM [mem 0x00000000-0x0003ffff pref]
[    2.094709] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.094760] pci 0000:00:0e.0: BAR 0 [io  0x0000-0x001f]
[    2.094776] pci 0000:00:0e.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.094792] pci 0000:00:0e.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.095171] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint
[    2.095217] pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.095588] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    2.095635] pci 0000:00:10.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.095653] pci 0000:00:10.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.096046] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    2.096093] pci 0000:00:11.0: BAR 0 [io  0x0000-0x007f]
[    2.096108] pci 0000:00:11.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.096124] pci 0000:00:11.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.097068] PCI: bus0: Fast back to back transfers disabled
[    2.108158] pci 0000:00:0d.0: ROM [mem 0x60000000-0x6003ffff pref]: assigned
[    2.108359] pci 0000:00:0d.0: BAR 4 [mem 0x60040000-0x60043fff 64bit pref]: assigned
[    2.108498] pci 0000:00:0e.0: BAR 4 [mem 0x60044000-0x60047fff 64bit pref]: assigned
[    2.108539] pci 0000:00:0f.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned
[    2.108562] pci 0000:00:10.0: BAR 4 [mem 0x60048000-0x6004bfff 64bit pref]: assigned
[    2.108584] pci 0000:00:11.0: BAR 4 [mem 0x6004c000-0x6004ffff 64bit pref]: assigned
[    2.108606] pci 0000:00:0c.0: BAR 2 [mem 0x50004000-0x50005fff]: assigned
[    2.108627] pci 0000:00:0d.0: BAR 1 [mem 0x50006000-0x50006fff]: assigned
[    2.108644] pci 0000:00:0e.0: BAR 1 [mem 0x50007000-0x50007fff]: assigned
[    2.108660] pci 0000:00:10.0: BAR 1 [mem 0x50008000-0x50008fff]: assigned
[    2.108676] pci 0000:00:11.0: BAR 1 [mem 0x50009000-0x50009fff]: assigned
[    2.108692] pci 0000:00:0c.0: BAR 1 [mem 0x5000a000-0x5000a3ff]: assigned
[    2.108717] pci 0000:00:0c.0: BAR 0 [io  0x1000-0x10ff]: assigned
[    2.108745] pci 0000:00:11.0: BAR 0 [io  0x1400-0x147f]: assigned
[    2.108761] pci 0000:00:0d.0: BAR 0 [io  0x1480-0x149f]: assigned
[    2.108776] pci 0000:00:0e.0: BAR 0 [io  0x14a0-0x14bf]: assigned
[    2.109010] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    2.109027] pci_bus 0000:00: resource 5 [mem 0x50000000-0x5fffffff]
[    2.109040] pci_bus 0000:00: resource 6 [mem 0x60000000-0x6fffffff pref]
[    2.110090] pci 0000:00:0f.0: enabling device (0100 -> 0102)
[    2.112312] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103)
[    2.114481] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103)
[    2.115575] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102)
[    2.116800] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103)
[    2.130296] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.141997] random: crng init done
[    2.144063] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0
[    2.144498] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.144516] [drm] features: -context_init
[    2.144828] [drm] number of scanouts: 1
[    2.144857] [drm] number of cap sets: 0
[    2.157209] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:10.0 on minor 0
[    2.227325] Console: switching to colour frame buffer device 160x50
[    2.247217] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.249856] versatile-tft-panel 10000000.sysreg:display@0: no panel detected
[    2.251233] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.287817] brd: module loaded
[    2.288328] virtio_blk virtio3: 1/0/0 default/read/poll queues
[    2.291626] virtio_blk virtio3: [vda] 1029324 512-byte logical blocks (527 MB/503 MiB)
[    2.305501] physmap-flash 34000000.flash: versatile/realview flash protection
[    2.315426] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff]
[    2.318526] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
[    2.318906] Intel/Sharp Extended Query Table at 0x0031
[    2.319688] Using buffer write method
[    2.336909] smc91x: not found (-19).
[    2.338026] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found
[    2.338207] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000
[    2.365489] rtc-ds1307 0-0068: registered as rtc0
[    2.374553] rtc-ds1307 0-0068: setting system clock to 2026-07-17T12:45:27 UTC (1784292327)
[    2.380073] rtc-pl031 101e8000.rtc: registered as rtc1
[    2.380562] i2c_dev: i2c /dev entries driver
[    2.381336] versatile reboot driver registered
[    2.383028] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    2.389734] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio)
[    2.392388] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio)
[    2.394748] usbcore: registered new interface driver usbhid
[    2.394778] usbhid: USB HID core driver
[    2.421306] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    2.421349] aaci-pl041 10004000.aaci: FIFO 512 entries
[    2.422077] u32 classifier
[    2.422095]     input device check on
[    2.422104]     Actions configured
[    2.423978] NET: Registered PF_INET6 protocol family
[    2.432766] Segment Routing with IPv6
[    2.432939] In-situ OAM (IOAM) with IPv6
[    2.433528] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.435945] NET: Registered PF_PACKET protocol family
[    2.436407] Bridge firewalling registered
[    2.437119] l2tp_core: L2TP core driver, V2.0
[    2.437224] Key type dns_resolver registered
[    2.441203] NET: Registered PF_VSOCK protocol family
[    2.450104] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0
[    2.482885] registered taskstats version 1
[    2.514379] Key type .fscrypt registered
[    2.514417] Key type fscrypt-provisioning registered
[    2.519860] Btrfs loaded, zoned=no, fsverity=no
[    2.529349] Key type encrypted registered
[    2.532172] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.533786] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.534403] netconsole: network logging started
[    2.872388] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2
[    2.876345] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.940454] IP-Config: Complete:
[    2.940529]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    2.940815]      host=192.168.7.4, domain=, nis-domain=(none)
[    2.940843]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.940907]      nameserver0=8.8.8.8
[    2.946073] clk: Disabling unused clocks
[    2.946661] ALSA device list:
[    2.946755]   #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    2.961006] md: Waiting for all devices to be available before autodetect
[    2.961029] md: If you don't use raid, use raid=noautodetect
[    2.961066] md: Autodetecting RAID arrays.
[    2.961090] md: autorun ...
[    2.961117] md: ... autorun DONE.
[    3.127818] EXT4-fs (vda): mounted filesystem 1a25b3cd-608d-4c16-b625-cd95311f4dcb r/w with ordered data mode. Quota mode: disabled.
[    3.128229] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.129846] devtmpfs: mounted
[    3.163058] Freeing unused kernel image (initmem) memory: 512K
[    3.163109] Kernel memory protection not selected by kernel config.
[    3.163333] Run /sbin/init as init process
INIT: version 3.14 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    4.694389] udevd[112]: starting version 3.2.14
[    4.795790] udevd[113]: starting eudev-3.2.14
[   10.258892] EXT4-fs (vda): re-mounted 1a25b3cd-608d-4c16-b625-cd95311f4dcb.
[   13.289761] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[   13.290523] amba 10100000.smc: deferred probe pending: (reason unknown)
[   13.290562] amba 10110000.mpmc: deferred probe pending: (reason unknown)
[   13.290575] amba 101e0000.sctl: deferred probe pending: (reason unknown)
[   13.290585] amba 101e1000.watchdog: deferred probe pending: (reason unknown)
[   13.290595] amba 101f0000.sci: deferred probe pending: (reason unknown)
[   13.290605] amba 101f4000.spi: deferred probe pending: (reason unknown)
[   13.290615] amba 1000a000.sci: deferred probe pending: (reason unknown)
[   13.290625] amba 10120000.display: deferred probe pending: (reason unknown)
ALSA: Restoring mixer settings...
alsa-lib /usr/src/debug/alsa-lib/1.2.16.1/src/ucm/main.c:1805:(snd_use_case_mgr_open) failed to import hw:0 use case configuration -2
No state is present for card Interface
alsa-lib /usr/src/debug/alsa-lib/1.2.16.1/src/ucm/main.c:1805:(snd_use_case_mgr_open) failed to import hw:0 use case configuration -2
Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" ""
Hardware is initialized using a generic method
No state is present for card Interface
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus[453]: Unknown username "pipewire" in message bus configuration file
dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.24
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarmv5 6.18.35-yocto-standard #1 PREEMPT Wed Jun 10 16:00:30 UTC 2026 armv5tejl
Starting rpcbind daemon...Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
 
Current version of pixman: 0.46.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 17 12:45:39 2026
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 6.0.99+snapshot-7e53577eb667c8eb2691f72787831b6a93bb4b6e qemuarmv5 /dev/ttyAMA0

Type 'root' to login with superuser privileges (no password will be asked).

qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Multiple symbols for level 1/group 1 on key <FK23>
>                   Using F23, ignoring XF86TouchpadOff
> Warning:          Symbol map for key <FK23> redefined
>                   Using last definition for conflicting fields
> Warning:          Symbol map for key <FK24> redefined
>                   Using last definition for conflicting fields
> Warning:          Could not resolve keysym XF86ElectronicPrivacyScreenOn
> Warning:          Could not resolve keysym XF86ElectronicPrivacyScreenOff
> Warning:          Could not resolve keysym XF86ActionOnSelection
> Warning:          Could not resolve keysym XF86ContextualInsert
> Warning:          Could not resolve keysym XF86ContextualQuery
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-8j1gOIAyjk,guid=cc1a2c01089d513b18bddaac6a5a23fc
/usr/bin/start-pulseaudio-x11: line 41: /usr/bin/pactl: No such file or directory
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[589]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=569 comm="connman-applet")
dbus-daemon[589]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)

** (at-spi2-registryd:631): [1;33mWARNING[0m **: [34m12:46:31.877[0m: Disabling unresponsive app with pid 603

** (at-spi2-registryd:631): [1;33mWARNING[0m **: [34m12:46:51.865[0m: Re-enabling app with pid 603
