[ 0.962457] Console: switching to colour frame buffer device 160x50 [ 0.964264] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.978645] brd: module loaded [ 0.979837] virtio_blk virtio2: 4/0/0 default/read/poll queues [ 0.983043] virtio_blk virtio2: [vda] 3314280 512-byte logical blocks (1.70 GB/1.58 GiB) [ 0.990711] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 0.991299] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 0.992851] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 0.994807] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 0.995006] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 0.995218] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed [ 0.995854] hub 1-0:1.0: USB hub found [ 0.996186] hub 1-0:1.0: 4 ports detected [ 0.996883] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.997444] hub 2-0:1.0: USB hub found [ 0.997863] hub 2-0:1.0: 4 ports detected [ 1.002200] rtc-pl031 9010000.pl031: registered as rtc0 [ 1.002648] rtc-pl031 9010000.pl031: setting system clock to 2026-07-28T22:28:00 UTC (1785277680) [ 1.003334] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev [ 1.004718] usbcore: registered new interface driver usbhid [ 1.005307] usbhid: USB HID core driver [ 1.010011] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available [ 1.010724] u32 classifier [ 1.011476] input device check on [ 1.011803] Actions configured [ 1.012173] NET: Registered PF_INET6 protocol family [ 1.014136] Segment Routing with IPv6 [ 1.014292] In-situ OAM (IOAM) with IPv6 [ 1.043708] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.044361] NET: Registered PF_PACKET protocol family [ 1.044741] Bridge firewalling registered [ 1.044976] l2tp_core: L2TP core driver, V2.0 [ 1.045344] Key type dns_resolver registered [ 1.045857] NET: Registered PF_VSOCK protocol family [ 1.047776] registered taskstats version 1 [ 1.050699] Key type .fscrypt registered [ 1.051233] Key type fscrypt-provisioning registered [ 1.057019] Btrfs loaded, zoned=no, fsverity=no [ 1.058904] Key type encrypted registered [ 1.059637] netconsole: network logging started [ 1.085650] IP-Config: Complete: [ 1.086111] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 1.086868] host=192.168.7.8, domain=, nis-domain=(none) [ 1.087304] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.087307] nameserver0=8.8.8.8 [ 1.088171] clk: Disabling unused clocks [ 1.088441] PM: genpd: Disabling unused power domains [ 1.088971] md: Waiting for all devices to be available before autodetect [ 1.089207] md: If you don't use raid, use raid=noautodetect [ 1.089369] md: Autodetecting RAID arrays. [ 1.089578] md: autorun ... [ 1.089677] md: ... autorun DONE. [ 1.107211] EXT4-fs (vda): mounted filesystem 2a06c1e0-9460-4e4a-b7dd-374e0201626f r/w with ordered data mode. Quota mode: disabled. [ 1.107823] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.108159] devtmpfs: mounted [ 1.109086] Freeing unused kernel memory: 1856K [ 1.109421] Run /sbin/init as init process INIT: version 3.14 booting Starting udev [ 1.243676] udevd[118]: starting version 3.2.14 [ 1.252408] udevd[119]: starting eudev-3.2.14 [ 1.253680] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.400619] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 1.401207] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0 [ 1.521751] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 1.664789] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 1.721821] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0 [ 1.833687] EXT4-fs (vda): re-mounted 2a06c1e0-9460-4e4a-b7dd-374e0201626f. INIT: Entering runlevel: 5 Configuring network interfaces... Error: ipv4: Address already assigned. Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 6.0.99+snapshot-5d834e8b093b13d82c52545d12eac79184b6569b qemuarm64 hvc0 Type 'root' to login with superuser privileges (no password will be asked). qemuarm64 login: [ 11.708167] loop: module loaded [ 12.441803] loop0: detected capacity change from 0 to 20480 [ 12.631180] loop0: detected capacity change from 0 to 10240 [ 12.648911] loop1: detected capacity change from 0 to 10240 [ 20.918686] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 20.919432] scsi host0: scsi_debug: version 0191 [20210520] [ 20.919432] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 20.924042] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 20.924673] scsi 0:0:0:0: Power-on or device reset occurred [ 20.946717] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 20.951449] sd 0:0:0:0: [sda] Write Protect is off [ 20.960566] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 20.985703] sd 0:0:0:0: [sda] permanent stream count = 5 [ 20.998355] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 20.999000] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 21.098068] sd 0:0:0:0: [sda] Attached SCSI disk [ 22.190271] sda: sda1 sda2 sda3 sda4 [ 22.542093] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 22.746292] loop0: detected capacity change from 0 to 10240 [ 23.197588] loop0: detected capacity change from 0 to 10240 [ 23.459833] loop0: p1 [ 28.992114] loop0: detected capacity change from 0 to 8 [ 31.880360] loop0: detected capacity change from 0 to 120 [ 33.800566] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 33.801505] scsi host0: scsi_debug: version 0191 [20210520] [ 33.801505] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 33.802362] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 33.803132] scsi 0:0:0:0: Power-on or device reset occurred [ 33.823855] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 33.828564] sd 0:0:0:0: [sda] Write Protect is off [ 33.837162] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 33.863783] sd 0:0:0:0: [sda] permanent stream count = 5 [ 33.876745] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 33.877521] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 33.977858] sd 0:0:0:0: [sda] Attached SCSI disk [ 35.011379] sd 0:0:0:0: [sda] Spinning up disk... [ 36.017677] .ready [ 36.130079] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 36.332344] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 36.333403] scsi host0: scsi_debug: version 0191 [20210520] [ 36.333403] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 36.334978] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 36.335854] scsi 0:0:0:0: Power-on or device reset occurred [ 36.356623] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 36.361548] sd 0:0:0:0: [sda] Write Protect is off [ 36.370117] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 36.395149] sd 0:0:0:0: [sda] permanent stream count = 5 [ 36.407900] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 36.408347] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 36.489883] sd 0:0:0:0: [sda] Attached SCSI disk [ 37.123088] EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem [ 37.136677] EXT4-fs (sda): mounted filesystem c55eef32-bac0-4c07-8859-c429b06bc59f r/w without journal. Quota mode: disabled. [ 37.191734] EXT4-fs (sda): unmounting filesystem c55eef32-bac0-4c07-8859-c429b06bc59f. [ 38.219516] sd 0:0:0:0: [sda] Spinning up disk... [ 39.249679] .ready [ 39.370107] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 39.556827] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 39.557666] scsi host0: scsi_debug: version 0191 [20210520] [ 39.557666] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 39.558584] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 39.559930] scsi 0:0:0:0: Power-on or device reset occurred [ 39.580758] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 39.585459] sd 0:0:0:0: [sda] Write Protect is off [ 39.594005] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 39.619111] sd 0:0:0:0: [sda] permanent stream count = 5 [ 39.631871] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 39.632249] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 39.717842] sd 0:0:0:0: [sda] Attached SCSI disk [ 40.063008] sda: sda1 sda2 [ 40.985338] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 40.999117] EXT4-fs (sda1): mounted filesystem 8119a294-1352-404f-8b6b-190eecf67a8a r/w without journal. Quota mode: disabled. [ 41.045948] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 41.059118] EXT4-fs (sda2): mounted filesystem df0e4a98-b332-451b-b2b6-f9ef8f31535a r/w without journal. Quota mode: disabled. [ 41.114426] EXT4-fs (sda2): unmounting filesystem df0e4a98-b332-451b-b2b6-f9ef8f31535a. [ 41.170748] EXT4-fs (sda1): unmounting filesystem 8119a294-1352-404f-8b6b-190eecf67a8a. [ 42.197063] sd 0:0:0:0: [sda] Spinning up disk... [ 43.217679] .ready [ 43.294201] sda: sda1 sda2 [ 43.334075] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 43.548422] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 43.549361] scsi host0: scsi_debug: version 0191 [20210520] [ 43.549361] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 43.550233] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 43.551699] scsi 0:0:0:0: Power-on or device reset occurred [ 43.572508] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 43.577344] sd 0:0:0:0: [sda] Write Protect is off [ 43.585859] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 43.610945] sd 0:0:0:0: [sda] permanent stream count = 5 [ 43.623554] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 43.623927] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 43.709788] sd 0:0:0:0: [sda] Attached SCSI disk [ 44.030455] sda: sda1 sda2 [ 45.928621] sd 0:0:0:0: [sda] Spinning up disk... [ 46.929722] .ready [ 47.014052] sda: sda1 sda2 [ 47.066102] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 47.261040] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 47.261725] scsi host0: scsi_debug: version 0191 [20210520] [ 47.261725] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 47.262712] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 47.263475] scsi 0:0:0:0: Power-on or device reset occurred [ 47.284239] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 47.289017] sd 0:0:0:0: [sda] Write Protect is off [ 47.297685] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 47.322515] sd 0:0:0:0: [sda] permanent stream count = 5 [ 47.334974] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 47.335935] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 47.421822] sd 0:0:0:0: [sda] Attached SCSI disk [ 47.742273] sda: sda1 sda2 [ 48.665741] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 48.679592] EXT4-fs (sda1): mounted filesystem 373154c3-2c65-4262-b8b2-abbf9a49a016 r/w without journal. Quota mode: disabled. [ 48.725129] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 48.738390] EXT4-fs (sda2): mounted filesystem d1c84eb5-99a3-44cc-847b-1363bc12a423 r/w without journal. Quota mode: disabled. [ 48.794391] EXT4-fs (sda2): unmounting filesystem d1c84eb5-99a3-44cc-847b-1363bc12a423. [ 48.849613] EXT4-fs (sda1): unmounting filesystem 373154c3-2c65-4262-b8b2-abbf9a49a016. [ 49.875414] sd 0:0:0:0: [sda] Spinning up disk... [ 50.901692] .ready [ 50.982141] sda: sda1 sda2 [ 51.038164] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 51.783101] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 51.783874] scsi host0: scsi_debug: version 0191 [20210520] [ 51.783874] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 51.785040] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 51.785352] scsi 0:0:0:0: Power-on or device reset occurred [ 51.806313] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 51.807028] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 51.811510] sd 0:0:0:0: [sda] Write Protect is off [ 51.820203] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 51.846565] sd 0:0:0:0: [sda] permanent stream count = 5 [ 51.859155] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 51.859732] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 51.957828] sd 0:0:0:0: [sda] Attached SCSI disk [ 52.723147] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 52.838138] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 53.027703] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 53.028488] scsi host0: scsi_debug: version 0191 [20210520] [ 53.028488] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 53.030561] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 53.031300] scsi 0:0:0:0: Power-on or device reset occurred [ 53.053054] sd 0:0:0:0: [sda] physical block alignment offset: 3584 [ 53.053611] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 53.054123] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 53.058519] sd 0:0:0:0: [sda] Write Protect is off [ 53.066996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 53.091674] sd 0:0:0:0: [sda] permanent stream count = 5 [ 53.104163] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 53.104737] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 53.213946] sd 0:0:0:0: [sda] Attached SCSI disk [ 54.026930] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 54.150433] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 54.334911] loop0: detected capacity change from 0 to 102400 [ 54.450973] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 54.451763] scsi host0: scsi_debug: version 0191 [20210520] [ 54.451763] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 54.452385] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 54.452728] scsi 0:0:0:0: Power-on or device reset occurred [ 54.473481] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 54.478225] sd 0:0:0:0: [sda] Write Protect is off [ 54.486935] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 54.512401] sd 0:0:0:0: [sda] permanent stream count = 5 [ 54.527182] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 54.527841] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 54.621874] sd 0:0:0:0: [sda] Attached SCSI disk [ 55.390939] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 55.498200] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 56.097050] loop0: detected capacity change from 0 to 20480 [ 56.126863] loop0: detected capacity change from 20480 to 40960 [ 56.148739] loop0: p1 p2 [ 67.282359] loop0: detected capacity change from 0 to 10240 [ 67.302223] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 67.304453] EXT4-fs (loop0): mounted filesystem aa0b1437-63a3-4acb-b188-8e16b89118fb r/w without journal. Quota mode: disabled. [ 67.311068] EXT4-fs (loop0): unmounting filesystem aa0b1437-63a3-4acb-b188-8e16b89118fb. [ 68.322081] NET: Registered PF_ALG protocol family [ 73.422580] loop0: detected capacity change from 0 to 20480 [ 73.423116] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 73.427492] EXT4-fs (loop0): mounted filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2 r/w without journal. Quota mode: disabled. [ 73.432770] EXT4-fs (loop0): unmounting filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2. [ 73.458479] loop0: detected capacity change from 0 to 20480 [ 73.460920] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 73.462734] EXT4-fs (loop0): mounted filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2 r/w without journal. Quota mode: disabled. [ 73.467727] EXT4-fs (loop0): unmounting filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2. [ 73.488919] loop0: detected capacity change from 0 to 20480 [ 73.496757] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 73.499085] EXT4-fs (loop0): mounted filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2 r/w without journal. Quota mode: disabled. [ 73.505722] EXT4-fs (loop0): unmounting filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2. [ 73.532386] loop0: detected capacity change from 0 to 20480 [ 73.535017] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 73.537379] EXT4-fs (loop0): mounted filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2 r/w without journal. Quota mode: disabled. [ 73.541575] EXT4-fs (loop0): unmounting filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2. [ 73.561669] loop0: detected capacity change from 0 to 20480 [ 73.565350] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 73.567618] EXT4-fs (loop0): mounted filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2 r/w without journal. Quota mode: disabled. [ 73.572408] EXT4-fs (loop0): unmounting filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2. [ 73.593831] loop0: detected capacity change from 0 to 20478 [ 73.617920] loop0: detected capacity change from 0 to 20480 [ 73.643510] loop0: detected capacity change from 0 to 20480 [ 73.667581] loop0: detected capacity change from 0 to 20480 [ 73.668279] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 73.670826] EXT4-fs (loop0): mounted filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2 r/w without journal. Quota mode: disabled. [ 73.676700] EXT4-fs (loop0): unmounting filesystem adb58e48-4b3b-47f0-b20f-d2cfec3009d2. [ 73.778378] loop0: detected capacity change from 0 to 20480 [ 73.781051] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 73.784723] EXT4-fs (loop0): mounted filesystem d93ffc98-deb5-400f-a07d-1527c2cfd7e1 r/w without journal. Quota mode: disabled. [ 73.789118] EXT4-fs (loop0): unmounting filesystem d93ffc98-deb5-400f-a07d-1527c2cfd7e1. [ 73.795460] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 73.797137] EXT4-fs (loop0): mounted filesystem d93ffc98-deb5-400f-a07d-1527c2cfd7e1 r/w without journal. Quota mode: disabled. [ 73.800634] EXT4-fs (loop1): mounting ext2 file system using the ext4 subsystem [ 73.803234] EXT4-fs (loop1): mounted filesystem d93ffc98-deb5-400f-a07d-1527c2cfd7e1 r/w without journal. Quota mode: disabled. [ 73.805595] EXT4-fs (loop0): unmounting filesystem d93ffc98-deb5-400f-a07d-1527c2cfd7e1. [ 73.811138] EXT4-fs (loop1): unmounting filesystem d93ffc98-deb5-400f-a07d-1527c2cfd7e1. [ 80.228634] set_capacity_and_notify: 3 callbacks suppressed [ 80.229024] loop0: detected capacity change from 0 to 20480 [ 80.253720] loop0: detected capacity change from 0 to 18432 [ 80.275644] loop0: detected capacity change from 0 to 6144 [ 80.301024] loop0: detected capacity change from 0 to 6144 [ 80.395397] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 80.396256] scsi host0: scsi_debug: version 0191 [20210520] [ 80.396256] dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0 [ 80.397287] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 80.397943] scsi 0:0:0:0: Power-on or device reset occurred [ 80.418747] sd 0:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB) [ 80.423067] sd 0:0:0:0: [sda] Write Protect is off [ 80.431347] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 80.456570] sd 0:0:0:0: [sda] permanent stream count = 5 [ 80.469268] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 80.469917] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 80.553849] sd 0:0:0:0: [sda] Attached SCSI disk [ 80.567936] loop0: detected capacity change from 0 to 22528 [ 80.595435] loop0: detected capacity change from 0 to 20480 [ 80.617845] loop0: detected capacity change from 0 to 6144 [ 80.641656] loop0: detected capacity change from 0 to 6144 [ 80.710103] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 80.909773] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 80.910596] scsi host0: scsi_debug: version 0191 [20210520] [ 80.910596] dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0 [ 80.911358] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 80.912000] scsi 0:0:0:0: Power-on or device reset occurred [ 80.933066] sd 0:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB) [ 80.937773] sd 0:0:0:0: [sda] Write Protect is off [ 80.946323] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 80.972272] sd 0:0:0:0: [sda] permanent stream count = 5 [ 80.984654] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 80.985147] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 81.085814] sd 0:0:0:0: [sda] Attached SCSI disk [ 81.103430] loop0: detected capacity change from 0 to 22528 [ 81.107549] loop0: detected capacity change from 0 to 22528 [ 81.458110] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 86.452128] set_capacity_and_notify: 10 callbacks suppressed [ 86.452406] loop0: detected capacity change from 0 to 223232 [ 86.452838] BTRFS: device fsid bb5afbac-99a6-45a2-8601-8873591dc2f0 devid 1 transid 8 /dev/loop0 (7:0) scanned by mount (26454) [ 86.459800] BTRFS info (device loop0): first mount of filesystem bb5afbac-99a6-45a2-8601-8873591dc2f0 [ 86.460878] BTRFS info (device loop0): using crc32c (crc32c-lib) checksum algorithm [ 86.464524] BTRFS info (device loop0): checking UUID tree [ 86.464830] BTRFS info (device loop0): turning on async discard [ 86.465105] BTRFS info (device loop0): enabling free space tree [ 86.496003] BTRFS info (device loop0): last unmount of filesystem bb5afbac-99a6-45a2-8601-8873591dc2f0 [ 88.347523] loop0: detected capacity change from 0 to 223232 [ 88.347948] BTRFS: device fsid 1db99599-768b-4f91-af9f-ea89f97c8a67 devid 1 transid 8 /dev/loop0 (7:0) scanned by mount (27708) [ 88.352165] BTRFS info (device loop0): first mount of filesystem 1db99599-768b-4f91-af9f-ea89f97c8a67 [ 88.352762] BTRFS info (device loop0): using crc32c (crc32c-lib) checksum algorithm [ 88.356250] BTRFS info (device loop0): checking UUID tree [ 88.356659] BTRFS info (device loop0): turning on async discard [ 88.356930] BTRFS info (device loop0): enabling free space tree [ 88.415745] BTRFS info (device loop0): last unmount of filesystem 1db99599-768b-4f91-af9f-ea89f97c8a67 [ 90.020665] loop0: detected capacity change from 0 to 10240 [ 91.192635] UDPLite: UDP-Lite is deprecated and scheduled to be removed in 2025, please contact the netdev mailing list [ 91.415509] UDPLite6: UDP-Lite is deprecated and scheduled to be removed in 2025, please contact the netdev mailing list [ 92.178273] loop0: detected capacity change from 0 to 2048 [ 92.196270] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 92.198120] EXT4-fs (loop0): mounted filesystem 87249362-5362-4d6e-947b-22f1853b6f10 r/w without journal. Quota mode: disabled. [ 92.204381] EXT4-fs (loop0): unmounting filesystem 87249362-5362-4d6e-947b-22f1853b6f10. [ 92.219709] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 92.222543] EXT4-fs (loop0): mounted filesystem 87249362-5362-4d6e-947b-22f1853b6f10 r/w without journal. Quota mode: disabled. [ 92.233275] EXT4-fs (loop0): unmounting filesystem 87249362-5362-4d6e-947b-22f1853b6f10. [ 96.513638] loop0: detected capacity change from 0 to 10240 [ 96.555097] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 96.558473] EXT4-fs (loop0): mounted filesystem ef9bfc9e-13e6-4fa4-bc03-e923497271cd r/w without journal. Quota mode: disabled. [ 96.611393] EXT4-fs (loop0): re-mounted ef9bfc9e-13e6-4fa4-bc03-e923497271cd ro. [ 96.634407] EXT4-fs (loop0): re-mounted ef9bfc9e-13e6-4fa4-bc03-e923497271cd r/w. [ 96.675639] EXT4-fs (loop0): unmounting filesystem ef9bfc9e-13e6-4fa4-bc03-e923497271cd. [ 96.749825] loop0: detected capacity change from 0 to 10240 [ 96.764791] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 96.766990] EXT4-fs (loop0): mounted filesystem a5636ac3-808b-4eb4-9278-d8497bf2d371 r/w without journal. Quota mode: disabled. [ 96.774369] EXT4-fs (loop0): unmounting filesystem a5636ac3-808b-4eb4-9278-d8497bf2d371. [ 96.965199] loop0: detected capacity change from 0 to 10240 [ 96.985254] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 96.987850] EXT4-fs (loop0): mounted filesystem b4acc77f-c874-4461-aa6f-5d3471486a6e r/w without journal. Quota mode: disabled. [ 96.996657] EXT4-fs (loop0): unmounting filesystem b4acc77f-c874-4461-aa6f-5d3471486a6e. [ 97.017354] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 97.021193] EXT4-fs (loop0): mounted filesystem b4acc77f-c874-4461-aa6f-5d3471486a6e r/w without journal. Quota mode: disabled. [ 97.030877] EXT4-fs (loop0): unmounting filesystem b4acc77f-c874-4461-aa6f-5d3471486a6e. [ 97.049298] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 97.050935] EXT4-fs (loop0): mounted filesystem b4acc77f-c874-4461-aa6f-5d3471486a6e r/w without journal. Quota mode: disabled. [ 97.079203] EXT4-fs (loop0): re-mounted b4acc77f-c874-4461-aa6f-5d3471486a6e ro. [ 97.090896] EXT4-fs (loop0): unmounting filesystem b4acc77f-c874-4461-aa6f-5d3471486a6e. [ 97.189671] loop0: detected capacity change from 0 to 10240 [ 97.206423] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 97.208662] EXT4-fs (loop0): mounted filesystem 80d24b96-00b0-4607-9372-a4f5c6b84638 r/w without journal. Quota mode: disabled. [ 97.215824] EXT4-fs (loop0): unmounting filesystem 80d24b96-00b0-4607-9372-a4f5c6b84638. [ 97.236506] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 97.238920] EXT4-fs (loop0): mounted filesystem 80d24b96-00b0-4607-9372-a4f5c6b84638 r/w without journal. Quota mode: disabled. [ 97.245483] EXT4-fs (loop0): unmounting filesystem 80d24b96-00b0-4607-9372-a4f5c6b84638. [ 97.275004] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 97.277953] EXT4-fs (loop0): mounted filesystem 80d24b96-00b0-4607-9372-a4f5c6b84638 r/w without journal. Quota mode: disabled. [ 97.289674] EXT4-fs (loop0): unmounting filesystem 80d24b96-00b0-4607-9372-a4f5c6b84638. [ 97.308722] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities [ 97.309593] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 97.311856] EXT4-fs (loop0): mounted filesystem 80d24b96-00b0-4607-9372-a4f5c6b84638 r/w without journal. Quota mode: disabled. [ 97.318802] EXT4-fs (loop0): unmounting filesystem 80d24b96-00b0-4607-9372-a4f5c6b84638. [ 97.336970] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities [ 97.337734] FAT-fs (loop0): bogus number of reserved sectors [ 97.338179] FAT-fs (loop0): Can't find a valid FAT filesystem [ 97.439760] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 97.440638] scsi host0: scsi_debug: version 0191 [20210520] [ 97.440638] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 97.441575] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 97.442251] scsi 0:0:0:0: Power-on or device reset occurred [ 97.463080] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 97.467573] sd 0:0:0:0: [sda] Write Protect is off [ 97.476462] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 97.501759] sd 0:0:0:0: [sda] permanent stream count = 5 [ 97.514466] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 97.516313] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 97.614030] sd 0:0:0:0: [sda] Attached SCSI disk [ 98.194728] sda: sda1 sda2 sda3 sda4 [ 99.143048] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 99.156731] EXT4-fs (sda1): mounted filesystem 694f9df9-e817-4774-8f04-98be967a2dc0 r/w without journal. Quota mode: disabled. [ 99.162021] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 99.175241] EXT4-fs (sda2): mounted filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a r/w without journal. Quota mode: disabled. [ 99.180473] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 99.189591] EXT4-fs (sda3): mounted filesystem b8028160-4453-4185-bf8e-91a5d377dacd ro without journal. Quota mode: disabled. [ 99.342557] EXT4-fs (sda4): mounted filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079 r/w with ordered data mode. Quota mode: disabled. [ 99.397067] EXT4-fs (sda1): unmounting filesystem 694f9df9-e817-4774-8f04-98be967a2dc0. [ 99.450472] EXT4-fs (sda2): unmounting filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a. [ 99.456311] EXT4-fs (sda3): unmounting filesystem b8028160-4453-4185-bf8e-91a5d377dacd. [ 99.506863] EXT4-fs (sda4): unmounting filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079. [ 99.678719] EXT4-fs (sda4): mounted filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079 r/w with ordered data mode. Quota mode: disabled. [ 99.733069] EXT4-fs (sda4): unmounting filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079. [ 99.757322] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 99.770675] EXT4-fs (sda1): mounted filesystem 694f9df9-e817-4774-8f04-98be967a2dc0 r/w without journal. Quota mode: disabled. [ 99.775907] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 99.788956] EXT4-fs (sda2): mounted filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a r/w without journal. Quota mode: disabled. [ 99.794017] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 99.803100] EXT4-fs (sda3): mounted filesystem b8028160-4453-4185-bf8e-91a5d377dacd ro without journal. Quota mode: disabled. [ 99.858408] EXT4-fs (sda1): unmounting filesystem 694f9df9-e817-4774-8f04-98be967a2dc0. [ 99.911969] EXT4-fs (sda2): unmounting filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a. [ 99.921502] EXT4-fs (sda3): unmounting filesystem b8028160-4453-4185-bf8e-91a5d377dacd. [ 99.943617] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 99.952679] EXT4-fs (sda3): mounted filesystem b8028160-4453-4185-bf8e-91a5d377dacd ro without journal. Quota mode: disabled. [ 99.958606] EXT4-fs (sda3): unmounting filesystem b8028160-4453-4185-bf8e-91a5d377dacd. [ 99.979854] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 99.988985] EXT4-fs (sda1): mounted filesystem 694f9df9-e817-4774-8f04-98be967a2dc0 ro without journal. Quota mode: disabled. [ 99.994232] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 100.003254] EXT4-fs (sda2): mounted filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a ro without journal. Quota mode: disabled. [ 100.008577] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 100.018266] EXT4-fs (sda3): mounted filesystem b8028160-4453-4185-bf8e-91a5d377dacd ro without journal. Quota mode: disabled. [ 100.166583] EXT4-fs (sda4): orphan cleanup on readonly fs [ 100.167124] EXT4-fs (sda4): mounted filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079 ro with ordered data mode. Quota mode: disabled. [ 100.174376] EXT4-fs (sda1): unmounting filesystem 694f9df9-e817-4774-8f04-98be967a2dc0. [ 100.177698] EXT4-fs (sda2): unmounting filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a. [ 100.179929] EXT4-fs (sda3): unmounting filesystem b8028160-4453-4185-bf8e-91a5d377dacd. [ 100.182285] EXT4-fs (sda4): unmounting filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079. [ 100.202030] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 100.215284] EXT4-fs (sda1): mounted filesystem 694f9df9-e817-4774-8f04-98be967a2dc0 r/w without journal. Quota mode: disabled. [ 100.220513] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 100.235543] EXT4-fs (sda2): mounted filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a r/w without journal. Quota mode: disabled. [ 100.240680] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 100.249486] EXT4-fs (sda3): mounted filesystem b8028160-4453-4185-bf8e-91a5d377dacd ro without journal. Quota mode: disabled. [ 100.401786] EXT4-fs (sda4): mounted filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079 r/w with ordered data mode. Quota mode: disabled. [ 100.456060] EXT4-fs (sda1): unmounting filesystem 694f9df9-e817-4774-8f04-98be967a2dc0. [ 100.510192] EXT4-fs (sda2): unmounting filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a. [ 100.515490] EXT4-fs (sda3): unmounting filesystem b8028160-4453-4185-bf8e-91a5d377dacd. [ 100.566163] EXT4-fs (sda4): unmounting filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079. [ 100.593320] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 100.606632] EXT4-fs (sda1): mounted filesystem 694f9df9-e817-4774-8f04-98be967a2dc0 r/w without journal. Quota mode: disabled. [ 100.612002] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 100.625545] EXT4-fs (sda2): mounted filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a r/w without journal. Quota mode: disabled. [ 100.630925] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 100.644053] EXT4-fs (sda3): mounted filesystem b8028160-4453-4185-bf8e-91a5d377dacd r/w without journal. Quota mode: disabled. [ 100.796415] EXT4-fs (sda4): mounted filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079 r/w with ordered data mode. Quota mode: disabled. [ 100.852178] EXT4-fs (sda1): unmounting filesystem 694f9df9-e817-4774-8f04-98be967a2dc0. [ 100.906108] EXT4-fs (sda2): unmounting filesystem fd6dd0db-2958-47bc-b4df-9d6fdec1ab3a. [ 100.959233] EXT4-fs (sda3): unmounting filesystem b8028160-4453-4185-bf8e-91a5d377dacd. [ 101.013081] EXT4-fs (sda4): unmounting filesystem 13a9f931-f9d8-4803-9287-3d26dcb9f079. [ 101.086198] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 101.537324] loop0: detected capacity change from 0 to 102400 [ 101.577609] loop1: detected capacity change from 0 to 102400 [ 101.580413] BTRFS: device fsid bc58f55e-fbab-4639-a535-cc4559d20335 devid 1 transid 8 /dev/loop1 (7:1) scanned by mount (1924) [ 101.586477] BTRFS info (device loop1): first mount of filesystem bc58f55e-fbab-4639-a535-cc4559d20335 [ 101.587156] BTRFS info (device loop1): using crc32c (crc32c-lib) checksum algorithm [ 101.590324] BTRFS info (device loop1): checking UUID tree [ 101.590910] BTRFS info (device loop1): turning on async discard [ 101.591310] BTRFS info (device loop1): enabling free space tree [ 101.602294] BTRFS info (device loop1): setting incompat feature flag for DEFAULT_SUBVOL (0x2) [ 101.613032] BTRFS info (device loop1): last unmount of filesystem bc58f55e-fbab-4639-a535-cc4559d20335 [ 101.629652] BTRFS: device fsid bc58f55e-fbab-4639-a535-cc4559d20335 devid 1 transid 9 /dev/loop0 (7:0) scanned by mount (1965) [ 101.635653] BTRFS info (device loop0): first mount of filesystem bc58f55e-fbab-4639-a535-cc4559d20335 [ 101.636415] BTRFS info (device loop0): using crc32c (crc32c-lib) checksum algorithm [ 101.639216] BTRFS info (device loop0): turning on async discard [ 101.639772] BTRFS info (device loop0): enabling free space tree [ 101.653753] BTRFS info (device loop0): last unmount of filesystem bc58f55e-fbab-4639-a535-cc4559d20335 [ 101.692667] BTRFS: device fsid bc58f55e-fbab-4639-a535-cc4559d20335 devid 1 transid 9 /dev/loop0 (7:0) scanned by mount (2007) [ 101.693614] BTRFS info (device loop0): first mount of filesystem bc58f55e-fbab-4639-a535-cc4559d20335 [ 101.694157] BTRFS info (device loop0): using crc32c (crc32c-lib) checksum algorithm [ 101.695626] BTRFS info (device loop0): turning on async discard [ 101.695839] BTRFS info (device loop0): enabling free space tree [ 101.714806] BTRFS info (device loop0): last unmount of filesystem bc58f55e-fbab-4639-a535-cc4559d20335 [ 101.805855] loop0: detected capacity change from 0 to 10240 [ 101.833222] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 101.834902] EXT4-fs (loop0): mounted filesystem 0d354de3-db20-4762-9003-02647c51c9a9 r/w without journal. Quota mode: disabled. [ 101.841318] EXT4-fs (loop0): unmounting filesystem 0d354de3-db20-4762-9003-02647c51c9a9. [ 101.859612] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 101.861963] EXT4-fs (loop0): mounted filesystem 0d354de3-db20-4762-9003-02647c51c9a9 r/w without journal. Quota mode: disabled. [ 101.868214] EXT4-fs (loop0): unmounting filesystem 0d354de3-db20-4762-9003-02647c51c9a9. [ 101.960280] loop0: detected capacity change from 0 to 10240 [ 101.991011] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 101.992923] EXT4-fs (loop0): mounted filesystem 270fe646-149a-4a02-b208-b6be46e156c1 r/w without journal. Quota mode: disabled. [ 101.999162] EXT4-fs (loop0): unmounting filesystem 270fe646-149a-4a02-b208-b6be46e156c1. [ 102.077607] loop0: detected capacity change from 0 to 10240 [ 102.107100] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 102.109476] EXT4-fs (loop0): mounted filesystem f6fa497f-5d5c-45ff-97e2-c40b867edb09 r/w without journal. Quota mode: disabled. [ 102.115905] EXT4-fs (loop0): unmounting filesystem f6fa497f-5d5c-45ff-97e2-c40b867edb09. [ 102.192752] loop0: detected capacity change from 0 to 10240 [ 102.231513] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 102.233710] EXT4-fs (loop0): mounted filesystem d1389844-c1ba-451d-ae95-256f14dc6f4b r/w without journal. Quota mode: disabled. [ 102.240078] EXT4-fs (loop0): unmounting filesystem d1389844-c1ba-451d-ae95-256f14dc6f4b. [ 102.260108] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 102.262167] EXT4-fs (loop0): mounted filesystem d1389844-c1ba-451d-ae95-256f14dc6f4b r/w without journal. Quota mode: disabled. [ 102.267986] EXT4-fs (loop0): unmounting filesystem d1389844-c1ba-451d-ae95-256f14dc6f4b. [ 102.287019] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 102.289808] EXT4-fs (loop0): mounted filesystem d1389844-c1ba-451d-ae95-256f14dc6f4b r/w without journal. Quota mode: disabled. [ 102.295549] EXT4-fs (loop0): unmounting filesystem d1389844-c1ba-451d-ae95-256f14dc6f4b. [ 102.377277] loop0: detected capacity change from 0 to 10240 [ 102.419366] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 102.421305] EXT4-fs (loop0): mounted filesystem 25535e42-f1d8-489c-ad61-c482660b6af5 r/w without journal. Quota mode: disabled. [ 102.428998] EXT4-fs (loop0): unmounting filesystem 25535e42-f1d8-489c-ad61-c482660b6af5. [ 102.447886] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 102.449924] EXT4-fs (loop0): mounted filesystem 25535e42-f1d8-489c-ad61-c482660b6af5 r/w without journal. Quota mode: disabled. [ 102.455747] EXT4-fs (loop0): unmounting filesystem 25535e42-f1d8-489c-ad61-c482660b6af5. [ 102.548902] loop0: detected capacity change from 0 to 10240 [ 102.592847] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 102.595348] EXT4-fs (loop0): mounted filesystem b5c8f1f1-742e-4f6b-a042-db6efc8c7736 r/w without journal. Quota mode: disabled. [ 102.601986] EXT4-fs (loop0): unmounting filesystem b5c8f1f1-742e-4f6b-a042-db6efc8c7736. [ 102.619904] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 102.729449] loop0: detected capacity change from 0 to 10240 [ 102.729991] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 102.909675] loop0: detected capacity change from 0 to 10240 [ 102.939100] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.025220] loop0: detected capacity change from 0 to 10240 [ 103.065896] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.094070] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.116270] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.204889] loop0: detected capacity change from 0 to 10240 [ 103.246341] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.270637] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.364648] loop0: detected capacity change from 0 to 10240 [ 103.406609] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.432001] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.519648] loop0: detected capacity change from 0 to 10240 [ 103.553543] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.581385] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.787183] loop0: detected capacity change from 0 to 10240 [ 103.787816] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.866268] loop0: detected capacity change from 0 to 10240 [ 103.879360] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 103.915233] EXT4-fs (loop0): re-mounted f0bcd379-0fe4-4a3e-9102-d17d81a8df0a ro. [ 104.045704] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.057497] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.066802] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.077684] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.090523] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.102017] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.313501] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.336094] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.639647] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.667644] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 104.781920] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 104.782857] scsi host0: scsi_debug: version 0191 [20210520] [ 104.782857] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 104.783807] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 104.784586] scsi 0:0:0:0: Power-on or device reset occurred [ 104.805650] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 104.810860] sd 0:0:0:0: [sda] Write Protect is off [ 104.819744] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 104.844858] sd 0:0:0:0: [sda] permanent stream count = 5 [ 104.857595] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 104.858539] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 104.949851] sd 0:0:0:0: [sda] Attached SCSI disk [ 105.510387] sda: sda1 sda2 sda3 sda4 [ 106.409291] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 106.597142] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 106.784726] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 106.909004] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 106.980169] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 107.037401] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 107.326091] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 107.561179] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 107.562264] scsi host0: scsi_debug: version 0191 [20210520] [ 107.562264] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 107.563039] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 107.563446] scsi 0:0:0:0: Power-on or device reset occurred [ 107.584245] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 107.588949] sd 0:0:0:0: [sda] Write Protect is off [ 107.597623] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 107.622312] sd 0:0:0:0: [sda] permanent stream count = 5 [ 107.634986] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 107.635516] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 107.721836] sd 0:0:0:0: [sda] Attached SCSI disk [ 108.282573] sda: sda1 sda2 sda3 sda4 [ 109.181103] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 109.256292] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 109.329585] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 109.385416] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 109.694129] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 109.929303] set_capacity_and_notify: 3 callbacks suppressed [ 109.929932] loop0: detected capacity change from 0 to 10240 [ 109.961066] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 109.986569] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 110.481409] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 110.481891] scsi host0: scsi_debug: version 0191 [20210520] [ 110.481891] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 110.484382] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 110.484901] scsi 0:0:0:0: Power-on or device reset occurred [ 110.506004] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 110.510795] sd 0:0:0:0: [sda] Write Protect is off [ 110.519223] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 110.544448] sd 0:0:0:0: [sda] permanent stream count = 5 [ 110.557644] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 110.558285] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 110.645847] sd 0:0:0:0: [sda] Attached SCSI disk [ 111.334581] sda: sda1 sda2 sda3 [ 111.630108] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 138.647439] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 138.648386] scsi host0: scsi_debug: version 0191 [20210520] [ 138.648386] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 138.649483] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 138.650119] scsi 0:0:0:0: Power-on or device reset occurred [ 138.670922] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 138.671716] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 138.676226] sd 0:0:0:0: [sda] Write Protect is off [ 138.684874] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 138.709949] sd 0:0:0:0: [sda] permanent stream count = 5 [ 138.722775] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 138.723486] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 138.813858] sd 0:0:0:0: [sda] Attached SCSI disk [ 139.619294] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 140.122948] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 141.254617] sda: sda1 sda2 sda3 [ 142.262291] sda: sda1 [ 143.558916] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 144.926628] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 145.962344] sda: sda1 [ 146.442310] sda: sda1 [ 147.494321] sda: sda1 sda2 < > [ 147.966867] sda: sda1 sda2 < > [ 149.006216] sda: sda1 sda2 < > [ 149.486672] sda: sda1 sda2 < > [ 150.726530] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 151.207359] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 152.418742] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 152.898776] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 153.930373] sda: sda1 [ 155.054441] sda: sda1 sda3 [ 156.190369] sda: sda1 sda2 [ 157.454554] sda: sda1 sda2 sda3 sda4 [ 158.546260] sda: sda1 sda2 sda3 [ 158.662290] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 158.845011] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 158.845837] scsi host0: scsi_debug: version 0191 [20210520] [ 158.845837] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 158.846797] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 158.847428] scsi 0:0:0:0: Power-on or device reset occurred [ 158.868546] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 158.869207] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 158.873557] sd 0:0:0:0: [sda] Write Protect is off [ 158.882587] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 158.907392] sd 0:0:0:0: [sda] permanent stream count = 5 [ 158.920186] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 158.920584] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 159.017855] sd 0:0:0:0: [sda] Attached SCSI disk [ 160.171556] sda: sda1 sda2 sda3 sda4 [ 161.847677] sda: sda1 sda2 sda3 sda4 [ 163.603436] sda: sda1 sda2 sda3 sda4 [ 163.698117] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 163.906087] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 163.906850] scsi host0: scsi_debug: version 0191 [20210520] [ 163.906850] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 163.907614] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 163.908139] scsi 0:0:0:0: Power-on or device reset occurred [ 163.928952] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 163.929736] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 163.934180] sd 0:0:0:0: [sda] Write Protect is off [ 163.942587] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 163.968685] sd 0:0:0:0: [sda] permanent stream count = 5 [ 163.981641] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 163.982036] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 164.069934] sd 0:0:0:0: [sda] Attached SCSI disk [ 165.223880] sda: sda1 sda2 sda3 sda4 sda5 [ 165.911100] sda: sda1 sda2 sda3 sda4 sda5 [ 166.579469] sda: sda1 sda2 sda3 sda4 sda5 [ 167.243358] sda: sda1 sda2 sda3 sda4 sda5 [ 167.907105] sda: sda1 sda2 sda3 sda4 sda5 [ 168.583523] sda: sda1 sda2 sda3 sda4 sda5 [ 169.347549] sda: sda1 sda2 sda3 sda4 sda5 [ 170.123545] sda: sda1 sda2 sda3 sda4 sda5 [ 170.903701] sda: sda1 sda2 sda3 sda4 sda5 [ 171.747452] sda: sda1 sda2 sda3 sda4 sda5 [ 172.603516] sda: sda1 sda2 sda3 sda4 sda5 [ 173.467620] sda: sda1 sda2 sda3 sda4 sda5 [ 175.507172] sda: sda1 sda2 sda3 sda4 [ 177.151034] sda: sda1 [ 177.810748] sda: sda1 [ 179.383038] sda: sda1 sda2 sda3 sda4 [ 180.051470] sda: sda1 sda2 sda3 sda4 [ 180.150087] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 180.369902] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 180.370867] scsi host0: scsi_debug: version 0191 [20210520] [ 180.370867] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 180.371910] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 180.372287] scsi 0:0:0:0: Power-on or device reset occurred [ 180.393059] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 180.398406] sd 0:0:0:0: [sda] Write Protect is off [ 180.407138] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 180.432959] sd 0:0:0:0: [sda] permanent stream count = 5 [ 180.445688] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 180.446520] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 180.534028] sd 0:0:0:0: [sda] Attached SCSI disk [ 181.054299] sda: sda1 [ 182.052925] sda: sda1 [ 182.760962] sda: sda1 [ 183.522109] sda: sda1 [ 183.702099] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 183.920634] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 183.921317] scsi host0: scsi_debug: version 0191 [20210520] [ 183.921317] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 183.922333] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 183.922705] scsi 0:0:0:0: Power-on or device reset occurred [ 183.943420] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 183.947845] sd 0:0:0:0: [sda] Write Protect is off [ 183.956473] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 183.981420] sd 0:0:0:0: [sda] permanent stream count = 5 [ 183.994708] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 183.995343] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 184.077842] sd 0:0:0:0: [sda] Attached SCSI disk [ 184.682355] sda: sda1 [ 185.174312] sda: sda1 [ 185.678332] sda: sda1 [ 186.170738] sda: sda1 [ 186.662401] sda: sda1 [ 187.154415] sda: sda1 [ 187.646254] sda: sda1 [ 188.134427] sda: sda1 [ 188.634257] sda: sda1 [ 189.134557] sda: sda1 [ 189.618554] sda: sda1 [ 190.106681] sda: sda1 [ 190.594427] sda: sda1 [ 191.182695] sda: sda1 sda2 [ 191.758545] sda: sda1 sda2 sda3 [ 192.246710] sda: sda1 sda2 sda3 [ 192.742608] sda: sda1 sda2 sda3 [ 194.079254] sda: sda1 [ 194.759267] sda: sda1 [ 195.447153] sda: sda1 [ 196.147128] sda: sda1 [ 196.851329] sda: sda1 [ 197.558874] sda: sda1 [ 198.247225] sda: sda1 [ 198.943302] sda: sda1 [ 199.647134] sda: sda1 [ 200.331515] sda: sda1 [ 201.015104] sda: sda1 [ 201.706848] sda: sda1 [ 202.387019] sda: sda1 [ 203.167447] sda: sda1 sda2 [ 203.939378] sda: sda1 sda2 sda3 [ 204.631285] sda: sda1 sda2 sda3 [ 205.323407] sda: sda1 sda2 sda3 [ 206.590731] sda: sda1 sda2 sda3 < sda5 sda6 > sda4 [ 207.095179] sda: sda1 sda2 sda3 < sda5 sda6 > sda4 [ 207.206367] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 207.467762] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 207.468715] scsi host0: scsi_debug: version 0191 [20210520] [ 207.468715] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 207.469909] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 207.470331] scsi 0:0:0:0: Power-on or device reset occurred [ 207.491072] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 207.491753] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 207.495971] sd 0:0:0:0: [sda] Write Protect is off [ 207.505061] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 207.529938] sd 0:0:0:0: [sda] permanent stream count = 5 [ 207.542714] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 207.543327] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 207.629841] sd 0:0:0:0: [sda] Attached SCSI disk [ 208.703266] sda: sda1 sda2 sda3 sda4 [ 210.291044] sda: sda1 sda2 sda3 sda4 [ 211.939023] sda: sda1 sda2 sda3 sda4 [ 213.430355] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 213.688496] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 213.689367] scsi host0: scsi_debug: version 0191 [20210520] [ 213.689367] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 213.690520] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 213.691162] scsi 0:0:0:0: Power-on or device reset occurred [ 213.711845] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 213.712075] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 213.716270] sd 0:0:0:0: [sda] Write Protect is off [ 213.724703] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 213.749652] sd 0:0:0:0: [sda] permanent stream count = 5 [ 213.763537] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 213.763937] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 213.845859] sd 0:0:0:0: [sda] Attached SCSI disk [ 217.783574] sda: sda1 [ 219.303116] sda: sda1 [ 219.518239] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 219.819104] loop0: detected capacity change from 0 to 10240 [ 219.833177] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 219.922627] loop0: detected capacity change from 0 to 10240 [ 219.942330] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 220.041695] loop0: detected capacity change from 0 to 10240 [ 220.064082] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 220.164893] loop0: detected capacity change from 0 to 10240 [ 220.192300] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 220.287636] loop0: detected capacity change from 0 to 10240 [ 220.314615] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 226.323552] udevd[12952]: starting version 3.2.14 [ 226.326110] udevd[12953]: starting eudev-3.2.14