[    0.764536] [drm] Initialized bochs-drm 1.0.0 for 0000:00:03.0 on minor 0
[    0.851510] Console: switching to colour frame buffer device 160x50
[    0.890329] bochs-drm 0000:00:03.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    0.923464] brd: module loaded
[    0.924375] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    0.929078] virtio_blk virtio1: [vda] 3296768 512-byte logical blocks (1.69 GB/1.57 GiB)
[    0.949210] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    0.950218] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    0.954503] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    0.957306] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    0.957671] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.958167] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    0.965927] hub 1-0:1.0: USB hub found
[    0.966890] hub 1-0:1.0: 4 ports detected
[    0.970934] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.973452] hub 2-0:1.0: USB hub found
[    0.974085] hub 2-0:1.0: 4 ports detected
[    0.979762] goldfish_rtc 101000.rtc: registered as rtc0
[    0.980835] goldfish_rtc 101000.rtc: setting system clock to 2026-10-03T17:17:22 UTC (1791047842)
[    0.983783] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    0.986137] usbcore: registered new interface driver usbhid
[    0.986495] usbhid: USB HID core driver
[    0.987278] riscv-pmu-sbi: SBI PMU extension is available
[    0.988225] riscv-pmu-sbi: 16 firmware and 18 hardware counters
[    0.992272] u32 classifier
[    0.992570]     input device check on
[    0.992872]     Actions configured
[    0.998112] NET: Registered PF_INET6 protocol family
[    1.007422] Segment Routing with IPv6
[    1.007903] In-situ OAM (IOAM) with IPv6
[    1.009252] NET: Registered PF_PACKET protocol family
[    1.010396] Bridge firewalling registered
[    1.012279] l2tp_core: L2TP core driver, V2.0
[    1.013215] Key type dns_resolver registered
[    1.014373] NET: Registered PF_VSOCK protocol family
[    1.037384] registered taskstats version 1
[    1.062468] Key type .fscrypt registered
[    1.062975] Key type fscrypt-provisioning registered
[    1.068114] Btrfs loaded, zoned=no, fsverity=no
[    1.084478] Key type encrypted registered
[    1.086482] netconsole: network logging started
[    1.123691] IP-Config: Complete:
[    1.124222]      device=eth0, hwaddr=52:54:00:12:34:20, ipaddr=192.168.7.32, mask=255.255.255.0, gw=192.168.7.31
[    1.125159]      host=192.168.7.32, domain=, nis-domain=(none)
[    1.125688]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.125733]      nameserver0=8.8.8.8
[    1.129300] clk: Disabling unused clocks
[    1.133303] md: Waiting for all devices to be available before autodetect
[    1.133922] md: If you don't use raid, use raid=noautodetect
[    1.134527] md: Autodetecting RAID arrays.
[    1.134929] md: autorun ...
[    1.135205] md: ... autorun DONE.
[    1.186247] EXT4-fs (vda): mounted filesystem 331917a7-b53b-4ca7-9883-46c2aaed013e r/w with ordered data mode. Quota mode: disabled.
[    1.188118] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.190963] devtmpfs: mounted
[    1.193224] VFS: Pivoted into new rootfs
[    1.230170] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    1.299760] Freeing unused kernel image (initmem) memory: 2708K
[    1.301234] Run /sbin/init as init process
INIT: [    1.392086] input: QEMU QEMU USB Tablet as /dversion 3.14 bootingevices/platform/soc/30000000.pci/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0

[    1.395048] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    1.519541] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    1.669679] input: QEMU QEMU USB Keyboard as /devices/platform/soc/30000000.pci/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    1.730735] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
Starting udev
[    2.046467] udevd[129]: starting version 3.2.14
[    2.102751] udevd[130]: starting eudev-3.2.14
[    2.411834] EXT4-fs (vda): re-mounted 331917a7-b53b-4ca7-9883-46c2aaed013e.
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting OpenBSD Secure Shell server: sshd
  generating ssh ECDSA host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 6.1.99+snapshot-0490922068cc4c469e62d50d9c484ab8c1a903bd qemuriscv64 hvc0

Type 'root' to login with superuser privileges (no password will be asked).

qemuriscv64 login: [   14.622378] loop: module loaded
[   18.090022] loop0: detected capacity change from 0 to 20480
[   19.115641] loop0: detected capacity change from 0 to 10240
[   19.215719] loop1: detected capacity change from 0 to 10240
[   74.856752] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[   74.857609] scsi host0: scsi_debug: version 0191 [20210520]
[   74.857609]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[   74.865294] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[   74.869730] scsi 0:0:0:0: Power-on or device reset occurred
[   74.895708] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[   74.901169] sd 0:0:0:0: [sda] Write Protect is off
[   74.910093] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[   74.935740] sd 0:0:0:0: [sda] permanent stream count = 5
[   74.948730] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[   74.949372] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[   75.045224] sd 0:0:0:0: [sda] Attached SCSI disk
[   76.374686]  sda: sda1 sda2 sda3 sda4
[   76.978715] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   77.583972] loop0: detected capacity change from 0 to 10240
[   80.526139] loop0: detected capacity change from 0 to 10240
[   80.834685]  loop0: p1
[  113.136180] loop0: detected capacity change from 0 to 8
[  130.957332] loop0: detected capacity change from 0 to 120
[  139.323554] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  139.324353] scsi host1: scsi_debug: version 0191 [20210520]
[  139.324353]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  139.327208] scsi 1:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  139.330310] scsi 1:0:0:0: Power-on or device reset occurred
[  139.353328] sd 1:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  139.358581] sd 1:0:0:0: [sda] Write Protect is off
[  139.367365] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  139.393458] sd 1:0:0:0: [sda] permanent stream count = 5
[  139.406276] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  139.406829] sd 1:0:0:0: [sda] Optimal transfer size 524288 bytes
[  139.496548] sd 1:0:0:0: [sda] Attached SCSI disk
[  140.596168] sd 1:0:0:0: [sda] Spinning up disk...
[  141.607516] .ready
[  141.764991] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[  142.076548] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  142.077456] scsi host2: scsi_debug: version 0191 [20210520]
[  142.077456]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  142.080529] scsi 2:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  142.083190] scsi 2:0:0:0: Power-on or device reset occurred
[  142.106277] sd 2:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  142.111770] sd 2:0:0:0: [sda] Write Protect is off
[  142.120533] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  142.146259] sd 2:0:0:0: [sda] permanent stream count = 5
[  142.159174] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  142.159828] sd 2:0:0:0: [sda] Optimal transfer size 524288 bytes
[  142.256627] sd 2:0:0:0: [sda] Attached SCSI disk
[  143.015991] EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem
[  143.031777] EXT4-fs (sda): mounted filesystem 03f06c35-b526-4d4b-b1a6-f036122f7e94 r/w without journal. Quota mode: disabled.
[  143.111989] EXT4-fs (sda): unmounting filesystem 03f06c35-b526-4d4b-b1a6-f036122f7e94.
[  144.141700] sd 2:0:0:0: [sda] Spinning up disk...
[  145.159473] .ready
[  145.341214] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  145.765690] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  145.766767] scsi host3: scsi_debug: version 0191 [20210520]
[  145.766767]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  145.770329] scsi 3:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  145.773350] scsi 3:0:0:0: Power-on or device reset occurred
[  145.796495] sd 3:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  145.801868] sd 3:0:0:0: [sda] Write Protect is off
[  145.810677] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  145.836695] sd 3:0:0:0: [sda] permanent stream count = 5
[  145.849963] sd 3:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  145.850682] sd 3:0:0:0: [sda] Optimal transfer size 524288 bytes
[  145.940795] sd 3:0:0:0: [sda] Attached SCSI disk
[  146.526680]  sda: sda1 sda2
[  147.549093] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  147.563865] EXT4-fs (sda1): mounted filesystem 1d0967b2-c11b-42ba-9475-1aa0ef68517e r/w without journal. Quota mode: disabled.
[  147.629918] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  147.644800] EXT4-fs (sda2): mounted filesystem 6dfdfa25-0cd5-48da-a85e-c47bcf33cbad r/w without journal. Quota mode: disabled.
[  147.723611] EXT4-fs (sda2): unmounting filesystem 6dfdfa25-0cd5-48da-a85e-c47bcf33cbad.
[  147.786089] EXT4-fs (sda1): unmounting filesystem 1d0967b2-c11b-42ba-9475-1aa0ef68517e.
[  148.815359] sd 3:0:0:0: [sda] Spinning up disk...
[  149.831450] .ready
[  149.913357]  sda: sda1 sda2
[  150.001093] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[  150.350940] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  150.352037] scsi host4: scsi_debug: version 0191 [20210520]
[  150.352037]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  150.355262] scsi 4:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  150.358279] scsi 4:0:0:0: Power-on or device reset occurred
[  150.381178] sd 4:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  150.386528] sd 4:0:0:0: [sda] Write Protect is off
[  150.395358] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  150.421137] sd 4:0:0:0: [sda] permanent stream count = 5
[  150.434049] sd 4:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  150.434630] sd 4:0:0:0: [sda] Optimal transfer size 524288 bytes
[  150.520527] sd 4:0:0:0: [sda] Attached SCSI disk
[  150.958929]  sda: sda1 sda2
[  152.950792] sd 4:0:0:0: [sda] Spinning up disk...
[  153.963415] .ready
[  154.041161]  sda: sda1 sda2
[  154.133089] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[  154.482001] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  154.483131] scsi host5: scsi_debug: version 0191 [20210520]
[  154.483131]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  154.486535] scsi 5:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  154.489442] scsi 5:0:0:0: Power-on or device reset occurred
[  154.512497] sd 5:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  154.517914] sd 5:0:0:0: [sda] Write Protect is off
[  154.526711] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  154.552386] sd 5:0:0:0: [sda] permanent stream count = 5
[  154.565491] sd 5:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  154.566110] sd 5:0:0:0: [sda] Optimal transfer size 524288 bytes
[  154.652573] sd 5:0:0:0: [sda] Attached SCSI disk
[  155.102726]  sda: sda1 sda2
[  156.143060] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  156.159022] EXT4-fs (sda1): mounted filesystem eaa0c7b9-4ae7-4893-80b0-602004acfdc8 r/w without journal. Quota mode: disabled.
[  156.225658] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  156.240448] EXT4-fs (sda2): mounted filesystem 27023db5-63d7-4ba6-b0f1-ee69fadb92aa r/w without journal. Quota mode: disabled.
[  156.318243] EXT4-fs (sda2): unmounting filesystem 27023db5-63d7-4ba6-b0f1-ee69fadb92aa.
[  156.384185] EXT4-fs (sda1): unmounting filesystem eaa0c7b9-4ae7-4893-80b0-602004acfdc8.
[  157.414333] sd 5:0:0:0: [sda] Spinning up disk...
[  158.439440] .ready
[  158.521331]  sda: sda1 sda2
[  158.637073] sd 5:0:0:0: [sda] Synchronizing SCSI cache
[  161.569486] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  161.570302] scsi host6: scsi_debug: version 0191 [20210520]
[  161.570302]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  161.573421] scsi 6:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  161.576278] scsi 6:0:0:0: Power-on or device reset occurred
[  161.599131] sd 6:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  161.599891] sd 6:0:0:0: [sda] 4096-byte physical blocks
[  161.604927] sd 6:0:0:0: [sda] Write Protect is off
[  161.613650] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  161.639127] sd 6:0:0:0: [sda] permanent stream count = 5
[  161.652008] sd 6:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[  161.652578] sd 6:0:0:0: [sda] Optimal transfer size 524288 bytes
[  161.756487] sd 6:0:0:0: [sda] Attached SCSI disk
[  162.693713]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[  162.876909] sd 6:0:0:0: [sda] Synchronizing SCSI cache
[  163.416456] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  163.417286] scsi host7: scsi_debug: version 0191 [20210520]
[  163.417286]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  163.420294] scsi 7:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  163.423120] scsi 7:0:0:0: Power-on or device reset occurred
[  163.446095] sd 7:0:0:0: [sda] physical block alignment offset: 3584
[  163.446860] sd 7:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  163.447813] sd 7:0:0:0: [sda] 4096-byte physical blocks
[  163.453101] sd 7:0:0:0: [sda] Write Protect is off
[  163.461958] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  163.487625] sd 7:0:0:0: [sda] permanent stream count = 5
[  163.500573] sd 7:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[  163.501265] sd 7:0:0:0: [sda] Optimal transfer size 524288 bytes
[  163.592401] sd 7:0:0:0: [sda] Attached SCSI disk
[  164.681377]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[  164.868912] sd 7:0:0:0: [sda] Synchronizing SCSI cache
[  165.364585] loop0: detected capacity change from 0 to 102400
[  165.931144] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  165.932167] scsi host8: scsi_debug: version 0191 [20210520]
[  165.932167]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  165.935127] scsi 8:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  165.938188] scsi 8:0:0:0: Power-on or device reset occurred
[  165.961224] sd 8:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  165.966482] sd 8:0:0:0: [sda] Write Protect is off
[  165.975229] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  166.000707] sd 8:0:0:0: [sda] permanent stream count = 5
[  166.013615] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  166.014150] sd 8:0:0:0: [sda] Optimal transfer size 524288 bytes
[  166.104534] sd 8:0:0:0: [sda] Attached SCSI disk
[  167.045742]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[  167.253318] sd 8:0:0:0: [sda] Synchronizing SCSI cache
[  170.059621] loop0: detected capacity change from 0 to 20480
[  170.210275] loop0: detected capacity change from 20480 to 40960
[  170.298492]  loop0: p1 p2
[  198.502954] loop0: detected capacity change from 0 to 10240
[  198.584001] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  198.588932] EXT4-fs (loop0): mounted filesystem 65cb5602-cc29-4aa4-b037-3b0f3dd4498f r/w without journal. Quota mode: disabled.
[  198.611730] EXT4-fs (loop0): unmounting filesystem 65cb5602-cc29-4aa4-b037-3b0f3dd4498f.
[  204.802156] NET: Registered PF_ALG protocol family
[  229.306725] loop0: detected capacity change from 0 to 20480
[  229.308858] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  229.313371] EXT4-fs (loop0): mounted filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c r/w without journal. Quota mode: disabled.
[  229.326181] EXT4-fs (loop0): unmounting filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c.
[  229.442254] loop0: detected capacity change from 0 to 20480
[  229.454856] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  229.460047] EXT4-fs (loop0): mounted filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c r/w without journal. Quota mode: disabled.
[  229.471909] EXT4-fs (loop0): unmounting filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c.
[  229.582417] loop0: detected capacity change from 0 to 20480
[  229.605472] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  229.611449] EXT4-fs (loop0): mounted filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c r/w without journal. Quota mode: disabled.
[  229.642347] EXT4-fs (loop0): unmounting filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c.
[  229.778661] loop0: detected capacity change from 0 to 20480
[  229.792340] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  229.796981] EXT4-fs (loop0): mounted filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c r/w without journal. Quota mode: disabled.
[  229.823149] EXT4-fs (loop0): unmounting filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c.
[  229.937172] loop0: detected capacity change from 0 to 20480
[  229.966240] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  229.971854] EXT4-fs (loop0): mounted filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c r/w without journal. Quota mode: disabled.
[  230.004867] EXT4-fs (loop0): unmounting filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c.
[  230.130896] loop0: detected capacity change from 0 to 20478
[  230.270287] loop0: detected capacity change from 0 to 20480
[  230.408925] loop0: detected capacity change from 0 to 20480
[  230.549316] loop0: detected capacity change from 0 to 20480
[  230.551534] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  230.556923] EXT4-fs (loop0): mounted filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c r/w without journal. Quota mode: disabled.
[  230.582151] EXT4-fs (loop0): unmounting filesystem 406e3977-330b-4777-b1a6-94ad22f98b7c.
[  231.148152] loop0: detected capacity change from 0 to 20480
[  231.161420] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  231.165607] EXT4-fs (loop0): mounted filesystem 3ac0d87e-1d63-474f-aad4-1ca56bd3f59f r/w without journal. Quota mode: disabled.
[  231.191405] EXT4-fs (loop0): unmounting filesystem 3ac0d87e-1d63-474f-aad4-1ca56bd3f59f.
[  231.218460] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  231.222873] EXT4-fs (loop0): mounted filesystem 3ac0d87e-1d63-474f-aad4-1ca56bd3f59f r/w without journal. Quota mode: disabled.
[  231.252689] EXT4-fs (loop1): mounting ext2 file system using the ext4 subsystem
[  231.256766] EXT4-fs (loop1): mounted filesystem 3ac0d87e-1d63-474f-aad4-1ca56bd3f59f r/w without journal. Quota mode: disabled.
[  231.269630] EXT4-fs (loop0): unmounting filesystem 3ac0d87e-1d63-474f-aad4-1ca56bd3f59f.
[  231.284781] EXT4-fs (loop1): unmounting filesystem 3ac0d87e-1d63-474f-aad4-1ca56bd3f59f.
[  255.695527] set_capacity_and_notify: 3 callbacks suppressed
[  255.695595] loop0: detected capacity change from 0 to 20480
[  255.839607] loop0: detected capacity change from 0 to 18432
[  255.976418] loop0: detected capacity change from 0 to 6144
[  256.117047] loop0: detected capacity change from 0 to 6144
[  256.716001] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  256.716904] scsi host9: scsi_debug: version 0191 [20210520]
[  256.716904]   dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0
[  256.719916] scsi 9:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  256.722705] scsi 9:0:0:0: Power-on or device reset occurred
[  256.745587] sd 9:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB)
[  256.750987] sd 9:0:0:0: [sda] Write Protect is off
[  256.759882] sd 9:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  256.785555] sd 9:0:0:0: [sda] permanent stream count = 5
[  256.798481] sd 9:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  256.799024] sd 9:0:0:0: [sda] Optimal transfer size 524288 bytes
[  256.901123] sd 9:0:0:0: [sda] Attached SCSI disk
[  256.991151] loop0: detected capacity change from 0 to 22528
[  257.121692] loop0: detected capacity change from 0 to 20480
[  257.248979] loop0: detected capacity change from 0 to 6144
[  257.401298] loop0: detected capacity change from 0 to 6144
[  257.601930] sd 9:0:0:0: [sda] Synchronizing SCSI cache
[  258.112868] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  258.113630] scsi host10: scsi_debug: version 0191 [20210520]
[  258.113630]   dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0
[  258.117145] scsi 10:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  258.120317] scsi 10:0:0:0: Power-on or device reset occurred
[  258.143561] sd 10:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB)
[  258.149066] sd 10:0:0:0: [sda] Write Protect is off
[  258.157949] sd 10:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  258.183627] sd 10:0:0:0: [sda] permanent stream count = 5
[  258.196553] sd 10:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  258.197230] sd 10:0:0:0: [sda] Optimal transfer size 524288 bytes
[  258.288380] sd 10:0:0:0: [sda] Attached SCSI disk
[  258.372631] loop0: detected capacity change from 0 to 22528
[  258.389349] loop0: detected capacity change from 0 to 22528
[  259.740993] sd 10:0:0:0: [sda] Synchronizing SCSI cache
[  288.942184] set_capacity_and_notify: 10 callbacks suppressed
[  288.942222] loop0: detected capacity change from 0 to 223232
[  288.947014] BTRFS: device fsid 76998e11-5ada-4d2c-a485-deff16c0e926 devid 1 transid 8 /dev/loop0 (7:0) scanned by mount (26516)
[  288.951979] BTRFS info (device loop0): first mount of filesystem 76998e11-5ada-4d2c-a485-deff16c0e926
[  288.953174] BTRFS info (device loop0): using crc32c checksum algorithm
[  288.994747] BTRFS info (device loop0): checking UUID tree
[  288.996044] BTRFS info (device loop0): turning on async discard
[  288.996833] BTRFS info (device loop0): enabling free space tree
[  289.264286] BTRFS info (device loop0): last unmount of filesystem 76998e11-5ada-4d2c-a485-deff16c0e926
[  300.604205] loop0: detected capacity change from 0 to 223232
[  300.606097] BTRFS: device fsid 91693958-31a5-424c-98c2-269beb11a89a devid 1 transid 8 /dev/loop0 (7:0) scanned by mount (27769)
[  300.608573] BTRFS info (device loop0): first mount of filesystem 91693958-31a5-424c-98c2-269beb11a89a
[  300.609515] BTRFS info (device loop0): using crc32c checksum algorithm
[  300.621545] BTRFS info (device loop0): checking UUID tree
[  300.622462] BTRFS info (device loop0): turning on async discard
[  300.623050] BTRFS info (device loop0): enabling free space tree
[  301.090555] BTRFS info (device loop0): last unmount of filesystem 91693958-31a5-424c-98c2-269beb11a89a
[  309.679234] loop0: detected capacity change from 0 to 10240
[  322.556341] loop0: detected capacity change from 0 to 2048
[  322.655618] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  322.661270] EXT4-fs (loop0): mounted filesystem f93b3c08-8360-43ee-9b58-bcf8397c3bce r/w without journal. Quota mode: disabled.
[  322.686499] EXT4-fs (loop0): unmounting filesystem f93b3c08-8360-43ee-9b58-bcf8397c3bce.
[  322.758690] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  322.763239] EXT4-fs (loop0): mounted filesystem f93b3c08-8360-43ee-9b58-bcf8397c3bce r/w without journal. Quota mode: disabled.
[  322.829014] EXT4-fs (loop0): unmounting filesystem f93b3c08-8360-43ee-9b58-bcf8397c3bce.
[  348.740015] loop0: detected capacity change from 0 to 10240
[  348.933062] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  348.937985] EXT4-fs (loop0): mounted filesystem 91abd6ff-4162-4eb8-a454-d938bc703448 r/w without journal. Quota mode: disabled.
[  349.162341] EXT4-fs (loop0): re-mounted 91abd6ff-4162-4eb8-a454-d938bc703448 ro.
[  349.281605] EXT4-fs (loop0): re-mounted 91abd6ff-4162-4eb8-a454-d938bc703448 r/w.
[  349.495590] EXT4-fs (loop0): unmounting filesystem 91abd6ff-4162-4eb8-a454-d938bc703448.
[  349.878207] loop0: detected capacity change from 0 to 10240
[  349.958012] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  349.962785] EXT4-fs (loop0): mounted filesystem e70b8f82-7bad-4480-8a66-9976af724f9c r/w without journal. Quota mode: disabled.
[  350.004063] EXT4-fs (loop0): unmounting filesystem e70b8f82-7bad-4480-8a66-9976af724f9c.
[  350.946751] loop0: detected capacity change from 0 to 10240
[  351.033815] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  351.038170] EXT4-fs (loop0): mounted filesystem df284807-75a7-4d30-89df-c860e08539e8 r/w without journal. Quota mode: disabled.
[  351.080884] EXT4-fs (loop0): unmounting filesystem df284807-75a7-4d30-89df-c860e08539e8.
[  351.181759] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  351.186239] EXT4-fs (loop0): mounted filesystem df284807-75a7-4d30-89df-c860e08539e8 r/w without journal. Quota mode: disabled.
[  351.222857] EXT4-fs (loop0): unmounting filesystem df284807-75a7-4d30-89df-c860e08539e8.
[  351.323440] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  351.328880] EXT4-fs (loop0): mounted filesystem df284807-75a7-4d30-89df-c860e08539e8 r/w without journal. Quota mode: disabled.
[  351.394214] EXT4-fs (loop0): re-mounted df284807-75a7-4d30-89df-c860e08539e8 ro.
[  351.444080] EXT4-fs (loop0): unmounting filesystem df284807-75a7-4d30-89df-c860e08539e8.
[  351.871539] loop0: detected capacity change from 0 to 10240
[  351.954806] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  351.959073] EXT4-fs (loop0): mounted filesystem fc62d519-05fa-400b-b680-fc25ea7b9f03 r/w without journal. Quota mode: disabled.
[  351.995278] EXT4-fs (loop0): unmounting filesystem fc62d519-05fa-400b-b680-fc25ea7b9f03.
[  352.109115] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  352.113933] EXT4-fs (loop0): mounted filesystem fc62d519-05fa-400b-b680-fc25ea7b9f03 r/w without journal. Quota mode: disabled.
[  352.146841] EXT4-fs (loop0): unmounting filesystem fc62d519-05fa-400b-b680-fc25ea7b9f03.
[  352.301357] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  352.305494] EXT4-fs (loop0): mounted filesystem fc62d519-05fa-400b-b680-fc25ea7b9f03 r/w without journal. Quota mode: disabled.
[  352.363724] EXT4-fs (loop0): unmounting filesystem fc62d519-05fa-400b-b680-fc25ea7b9f03.
[  352.458735] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
[  352.460859] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  352.465279] EXT4-fs (loop0): mounted filesystem fc62d519-05fa-400b-b680-fc25ea7b9f03 r/w without journal. Quota mode: disabled.
[  352.505395] EXT4-fs (loop0): unmounting filesystem fc62d519-05fa-400b-b680-fc25ea7b9f03.
[  352.600366] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
[  352.602685] FAT-fs (loop0): bogus number of reserved sectors
[  352.603222] FAT-fs (loop0): Can't find a valid FAT filesystem
[  353.154906] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  353.156156] scsi host11: scsi_debug: version 0191 [20210520]
[  353.156156]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  353.159158] scsi 11:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  353.162076] scsi 11:0:0:0: Power-on or device reset occurred
[  353.184949] sd 11:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  353.190290] sd 11:0:0:0: [sda] Write Protect is off
[  353.199036] sd 11:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  353.224629] sd 11:0:0:0: [sda] permanent stream count = 5
[  353.238181] sd 11:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  353.238775] sd 11:0:0:0: [sda] Optimal transfer size 524288 bytes
[  353.340582] sd 11:0:0:0: [sda] Attached SCSI disk
[  354.272314]  sda: sda1 sda2 sda3 sda4
[  355.391475] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  355.406553] EXT4-fs (sda1): mounted filesystem 49199c59-2f90-4a60-957a-48817467910b r/w without journal. Quota mode: disabled.
[  355.412937] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  355.427817] EXT4-fs (sda2): mounted filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc r/w without journal. Quota mode: disabled.
[  355.434218] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[  355.444753] EXT4-fs (sda3): mounted filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4 ro without journal. Quota mode: disabled.
[  355.603835] EXT4-fs (sda4): mounted filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14 r/w with ordered data mode. Quota mode: disabled.
[  355.678125] EXT4-fs (sda1): unmounting filesystem 49199c59-2f90-4a60-957a-48817467910b.
[  355.733806] EXT4-fs (sda2): unmounting filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc.
[  355.740597] EXT4-fs (sda3): unmounting filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4.
[  355.790927] EXT4-fs (sda4): unmounting filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14.
[  356.039230] EXT4-fs (sda4): mounted filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14 r/w with ordered data mode. Quota mode: disabled.
[  356.111814] EXT4-fs (sda4): unmounting filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14.
[  356.214468] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  356.230641] EXT4-fs (sda1): mounted filesystem 49199c59-2f90-4a60-957a-48817467910b r/w without journal. Quota mode: disabled.
[  356.238528] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  356.254186] EXT4-fs (sda2): mounted filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc r/w without journal. Quota mode: disabled.
[  356.261001] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[  356.272245] EXT4-fs (sda3): mounted filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4 ro without journal. Quota mode: disabled.
[  356.349447] EXT4-fs (sda1): unmounting filesystem 49199c59-2f90-4a60-957a-48817467910b.
[  356.406132] EXT4-fs (sda2): unmounting filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc.
[  356.414140] EXT4-fs (sda3): unmounting filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4.
[  356.532154] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[  356.543134] EXT4-fs (sda3): mounted filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4 ro without journal. Quota mode: disabled.
[  356.579623] EXT4-fs (sda3): unmounting filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4.
[  356.685573] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  356.697115] EXT4-fs (sda1): mounted filesystem 49199c59-2f90-4a60-957a-48817467910b ro without journal. Quota mode: disabled.
[  356.704335] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  356.715589] EXT4-fs (sda2): mounted filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc ro without journal. Quota mode: disabled.
[  356.722835] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[  356.734160] EXT4-fs (sda3): mounted filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4 ro without journal. Quota mode: disabled.
[  356.891857] EXT4-fs (sda4): mounted filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14 ro with ordered data mode. Quota mode: disabled.
[  356.915828] EXT4-fs (sda1): unmounting filesystem 49199c59-2f90-4a60-957a-48817467910b.
[  356.918137] EXT4-fs (sda2): unmounting filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc.
[  356.920146] EXT4-fs (sda3): unmounting filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4.
[  356.921979] EXT4-fs (sda4): unmounting filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14.
[  357.033407] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  357.048525] EXT4-fs (sda1): mounted filesystem 49199c59-2f90-4a60-957a-48817467910b r/w without journal. Quota mode: disabled.
[  357.055875] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  357.071498] EXT4-fs (sda2): mounted filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc r/w without journal. Quota mode: disabled.
[  357.077866] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[  357.088932] EXT4-fs (sda3): mounted filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4 ro without journal. Quota mode: disabled.
[  357.248134] EXT4-fs (sda4): mounted filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14 r/w with ordered data mode. Quota mode: disabled.
[  357.327187] EXT4-fs (sda1): unmounting filesystem 49199c59-2f90-4a60-957a-48817467910b.
[  357.384560] EXT4-fs (sda2): unmounting filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc.
[  357.393076] EXT4-fs (sda3): unmounting filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4.
[  357.444706] EXT4-fs (sda4): unmounting filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14.
[  357.572648] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  357.587793] EXT4-fs (sda1): mounted filesystem 49199c59-2f90-4a60-957a-48817467910b r/w without journal. Quota mode: disabled.
[  357.594991] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  357.611213] EXT4-fs (sda2): mounted filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc r/w without journal. Quota mode: disabled.
[  357.620648] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[  357.636689] EXT4-fs (sda3): mounted filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4 r/w without journal. Quota mode: disabled.
[  357.799723] EXT4-fs (sda4): mounted filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14 r/w with ordered data mode. Quota mode: disabled.
[  357.881220] EXT4-fs (sda1): unmounting filesystem 49199c59-2f90-4a60-957a-48817467910b.
[  357.937268] EXT4-fs (sda2): unmounting filesystem 0cf6ba03-f6eb-4b4b-83e4-a5878449d6dc.
[  357.992947] EXT4-fs (sda3): unmounting filesystem 8847f5bc-9223-4418-9f74-8d23cfb707e4.
[  358.048525] EXT4-fs (sda4): unmounting filesystem 4d3bfa5b-aca2-4d02-931f-7e9571b7ba14.
[  358.281398] sd 11:0:0:0: [sda] Synchronizing SCSI cache
[  360.204583] loop0: detected capacity change from 0 to 102400
[  360.400850] loop1: detected capacity change from 0 to 102400
[  360.421976] BTRFS: device fsid c6b74e11-1726-43fe-817a-6fc59de3aeab devid 1 transid 8 /dev/loop1 (7:1) scanned by mount (1914)
[  360.425051] BTRFS info (device loop1): first mount of filesystem c6b74e11-1726-43fe-817a-6fc59de3aeab
[  360.425826] BTRFS info (device loop1): using crc32c checksum algorithm
[  360.440430] BTRFS info (device loop1): checking UUID tree
[  360.441289] BTRFS info (device loop1): turning on async discard
[  360.441944] BTRFS info (device loop1): enabling free space tree
[  360.520503] BTRFS info (device loop1): setting incompat feature flag for DEFAULT_SUBVOL (0x2)
[  360.593395] BTRFS info (device loop1): last unmount of filesystem c6b74e11-1726-43fe-817a-6fc59de3aeab
[  360.675008] BTRFS: device fsid c6b74e11-1726-43fe-817a-6fc59de3aeab devid 1 transid 9 /dev/loop0 (7:0) scanned by mount (1954)
[  360.677497] BTRFS info (device loop0): first mount of filesystem c6b74e11-1726-43fe-817a-6fc59de3aeab
[  360.678245] BTRFS info (device loop0): using crc32c checksum algorithm
[  360.687760] BTRFS info (device loop0): turning on async discard
[  360.688464] BTRFS info (device loop0): enabling free space tree
[  360.742788] BTRFS info (device loop0): last unmount of filesystem c6b74e11-1726-43fe-817a-6fc59de3aeab
[  360.915558] BTRFS: device fsid c6b74e11-1726-43fe-817a-6fc59de3aeab devid 1 transid 9 /dev/loop0 (7:0) scanned by mount (1995)
[  360.917825] BTRFS info (device loop0): first mount of filesystem c6b74e11-1726-43fe-817a-6fc59de3aeab
[  360.918609] BTRFS info (device loop0): using crc32c checksum algorithm
[  360.926563] BTRFS info (device loop0): turning on async discard
[  360.927124] BTRFS info (device loop0): enabling free space tree
[  360.974662] BTRFS info (device loop0): last unmount of filesystem c6b74e11-1726-43fe-817a-6fc59de3aeab
[  361.445317] loop0: detected capacity change from 0 to 10240
[  361.570576] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  361.575082] EXT4-fs (loop0): mounted filesystem 6a313564-2565-4e1f-9dbf-a7807d4d95bc r/w without journal. Quota mode: disabled.
[  361.605674] EXT4-fs (loop0): unmounting filesystem 6a313564-2565-4e1f-9dbf-a7807d4d95bc.
[  361.696038] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  361.700216] EXT4-fs (loop0): mounted filesystem 6a313564-2565-4e1f-9dbf-a7807d4d95bc r/w without journal. Quota mode: disabled.
[  361.731680] EXT4-fs (loop0): unmounting filesystem 6a313564-2565-4e1f-9dbf-a7807d4d95bc.
[  362.178561] loop0: detected capacity change from 0 to 10240
[  362.296713] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  362.300531] EXT4-fs (loop0): mounted filesystem 6bd50ed6-69a6-46cb-86a0-13bff52efcf3 r/w without journal. Quota mode: disabled.
[  362.332166] EXT4-fs (loop0): unmounting filesystem 6bd50ed6-69a6-46cb-86a0-13bff52efcf3.
[  362.738335] loop0: detected capacity change from 0 to 10240
[  362.864083] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  362.867869] EXT4-fs (loop0): mounted filesystem 42c8a98e-bd48-4d21-af60-544316df2fba r/w without journal. Quota mode: disabled.
[  362.900169] EXT4-fs (loop0): unmounting filesystem 42c8a98e-bd48-4d21-af60-544316df2fba.
[  363.322920] loop0: detected capacity change from 0 to 10240
[  363.543749] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  363.548371] EXT4-fs (loop0): mounted filesystem 24dbf467-d209-4e94-adcc-4e2621e4fbe0 r/w without journal. Quota mode: disabled.
[  363.586847] EXT4-fs (loop0): unmounting filesystem 24dbf467-d209-4e94-adcc-4e2621e4fbe0.
[  363.682141] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  363.686785] EXT4-fs (loop0): mounted filesystem 24dbf467-d209-4e94-adcc-4e2621e4fbe0 r/w without journal. Quota mode: disabled.
[  363.721538] EXT4-fs (loop0): unmounting filesystem 24dbf467-d209-4e94-adcc-4e2621e4fbe0.
[  363.818435] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  363.823822] EXT4-fs (loop0): mounted filesystem 24dbf467-d209-4e94-adcc-4e2621e4fbe0 r/w without journal. Quota mode: disabled.
[  363.858386] EXT4-fs (loop0): unmounting filesystem 24dbf467-d209-4e94-adcc-4e2621e4fbe0.
[  364.339523] loop0: detected capacity change from 0 to 10240
[  364.566477] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  364.570706] EXT4-fs (loop0): mounted filesystem c431fc1b-a5c5-4afa-9fe3-0fd2ca7cf9f8 r/w without journal. Quota mode: disabled.
[  364.603132] EXT4-fs (loop0): unmounting filesystem c431fc1b-a5c5-4afa-9fe3-0fd2ca7cf9f8.
[  364.693692] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  364.698271] EXT4-fs (loop0): mounted filesystem c431fc1b-a5c5-4afa-9fe3-0fd2ca7cf9f8 r/w without journal. Quota mode: disabled.
[  364.731925] EXT4-fs (loop0): unmounting filesystem c431fc1b-a5c5-4afa-9fe3-0fd2ca7cf9f8.
[  365.222015] loop0: detected capacity change from 0 to 10240
[  365.478907] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  365.483771] EXT4-fs (loop0): mounted filesystem 0a9d1278-2864-4203-8d29-e565ce8a5f1c r/w without journal. Quota mode: disabled.
[  365.518492] EXT4-fs (loop0): unmounting filesystem 0a9d1278-2864-4203-8d29-e565ce8a5f1c.
[  365.622838] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  365.627535] EXT4-fs (loop0): mounted filesystem 0a9d1278-2864-4203-8d29-e565ce8a5f1c r/w without journal. Quota mode: disabled.
[  365.662328] EXT4-fs (loop0): unmounting filesystem 0a9d1278-2864-4203-8d29-e565ce8a5f1c.
[  366.190463] loop0: detected capacity change from 0 to 10240
[  366.192503] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  367.088425] loop0: detected capacity change from 0 to 10240
[  367.216648] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  367.668637] loop0: detected capacity change from 0 to 10240
[  367.898237] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  368.027248] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  368.167296] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  368.698452] loop0: detected capacity change from 0 to 10240
[  368.915621] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  369.048057] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  369.542662] loop0: detected capacity change from 0 to 10240
[  369.786363] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  369.925270] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  370.433675] loop0: detected capacity change from 0 to 10240
[  370.618973] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  370.760601] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  371.835732] loop0: detected capacity change from 0 to 10240
[  371.837456] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  372.287174] loop0: detected capacity change from 0 to 10240
[  372.333885] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  372.373774] EXT4-fs (loop0): re-mounted bca12230-d536-476f-a2e6-cb8aba0d4bd7 ro.
[  372.764606] loop0: detected capacity change from 0 to 10240
[  372.862890] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  372.909954] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  372.959274] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  373.006852] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  373.052097] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  373.100591] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  374.093239] loop0: detected capacity change from 0 to 10240
[  374.175793] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  374.295589] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  375.745511] loop0: detected capacity change from 0 to 10240
[  375.830244] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  375.975113] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  376.519950] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  376.520757] scsi host12: scsi_debug: version 0191 [20210520]
[  376.520757]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  376.523745] scsi 12:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  376.526534] scsi 12:0:0:0: Power-on or device reset occurred
[  376.549564] sd 12:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  376.555009] sd 12:0:0:0: [sda] Write Protect is off
[  376.563875] sd 12:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  376.590178] sd 12:0:0:0: [sda] permanent stream count = 5
[  376.603141] sd 12:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  376.603804] sd 12:0:0:0: [sda] Optimal transfer size 524288 bytes
[  376.688459] sd 12:0:0:0: [sda] Attached SCSI disk
[  377.396669]  sda: sda1 sda2 sda3 sda4
[  378.456572] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  378.831418] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  379.151149] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  379.366715] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  379.464281] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[  379.546259] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem
[  380.017282] sd 12:0:0:0: [sda] Synchronizing SCSI cache
[  380.673503] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  380.674251] scsi host13: scsi_debug: version 0191 [20210520]
[  380.674251]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  380.677096] scsi 13:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  380.679928] scsi 13:0:0:0: Power-on or device reset occurred
[  380.703509] sd 13:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  380.708886] sd 13:0:0:0: [sda] Write Protect is off
[  380.717657] sd 13:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  380.743297] sd 13:0:0:0: [sda] permanent stream count = 5
[  380.756279] sd 13:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  380.756873] sd 13:0:0:0: [sda] Optimal transfer size 524288 bytes
[  380.844464] sd 13:0:0:0: [sda] Attached SCSI disk
[  381.540913]  sda: sda1 sda2 sda3 sda4
[  382.563976] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  382.689162] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[  382.801181] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[  382.877720] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem
[  383.257135] sd 13:0:0:0: [sda] Synchronizing SCSI cache
[  383.819869] loop0: detected capacity change from 0 to 10240
[  383.999901] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  384.170606] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem
[  386.982131] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  386.982937] scsi host14: scsi_debug: version 0191 [20210520]
[  386.982937]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  386.985929] scsi 14:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  386.988824] scsi 14:0:0:0: Power-on or device reset occurred
[  387.011825] sd 14:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  387.017124] sd 14:0:0:0: [sda] Write Protect is off
[  387.025849] sd 14:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  387.051463] sd 14:0:0:0: [sda] permanent stream count = 5
[  387.064375] sd 14:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  387.064967] sd 14:0:0:0: [sda] Optimal transfer size 524288 bytes
[  387.148604] sd 14:0:0:0: [sda] Attached SCSI disk
[  388.163209]  sda: sda1 sda2 sda3
[  389.269224] sd 14:0:0:0: [sda] Synchronizing SCSI cache
[  436.975010] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  436.975967] scsi host15: scsi_debug: version 0191 [20210520]
[  436.975967]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  436.978791] scsi 15:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  436.981694] scsi 15:0:0:0: Power-on or device reset occurred
[  437.004497] sd 15:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  437.005230] sd 15:0:0:0: [sda] 4096-byte physical blocks
[  437.010282] sd 15:0:0:0: [sda] Write Protect is off
[  437.019006] sd 15:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  437.044508] sd 15:0:0:0: [sda] permanent stream count = 5
[  437.057365] sd 15:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[  437.057923] sd 15:0:0:0: [sda] Optimal transfer size 524288 bytes
[  437.144484] sd 15:0:0:0: [sda] Attached SCSI disk
[  438.109111]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[  438.748588]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[  440.115428]  sda: sda1 sda2 sda3
[  441.348548]  sda: sda1
[  443.013708]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[  444.907952]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[  446.186457]  sda: sda1
[  446.706297]  sda: sda1
[  447.942457]  sda: sda1 sda2 < >
[  448.462902]  sda: sda1 sda2 < >
[  449.710470]  sda: sda1 sda2 < >
[  450.222730]  sda: sda1 sda2 < >
[  451.678795]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[  452.259687]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[  453.737644]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[  454.280506]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[  455.506272]  sda: sda1
[  456.858992]  sda: sda1 sda3
[  458.214689]  sda: sda1 sda2
[  459.707513]  sda: sda1 sda2 sda3 sda4
[  461.002536]  sda: sda1 sda2 sda3
[  461.241068] sd 15:0:0:0: [sda] Synchronizing SCSI cache
[  461.764262] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  461.765046] scsi host16: scsi_debug: version 0191 [20210520]
[  461.765046]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  461.768056] scsi 16:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  461.770899] scsi 16:0:0:0: Power-on or device reset occurred
[  461.793681] sd 16:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  461.794460] sd 16:0:0:0: [sda] 4096-byte physical blocks
[  461.799741] sd 16:0:0:0: [sda] Write Protect is off
[  461.808585] sd 16:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  461.834282] sd 16:0:0:0: [sda] permanent stream count = 5
[  461.847280] sd 16:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[  461.847972] sd 16:0:0:0: [sda] Optimal transfer size 524288 bytes
[  461.932441] sd 16:0:0:0: [sda] Attached SCSI disk
[  463.294712]  sda: sda1 sda2 sda3 sda4
[  465.234831]  sda: sda1 sda2 sda3 sda4
[  467.295385]  sda: sda1 sda2 sda3 sda4
[  467.557054] sd 16:0:0:0: [sda] Synchronizing SCSI cache
[  468.126922] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  468.127983] scsi host17: scsi_debug: version 0191 [20210520]
[  468.127983]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  468.130794] scsi 17:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  468.133901] scsi 17:0:0:0: Power-on or device reset occurred
[  468.156861] sd 17:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  468.157825] sd 17:0:0:0: [sda] 4096-byte physical blocks
[  468.163394] sd 17:0:0:0: [sda] Write Protect is off
[  468.172366] sd 17:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  468.198064] sd 17:0:0:0: [sda] permanent stream count = 5
[  468.211003] sd 17:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[  468.211722] sd 17:0:0:0: [sda] Optimal transfer size 524288 bytes
[  468.296506] sd 17:0:0:0: [sda] Attached SCSI disk
[  469.659520]  sda: sda1 sda2 sda3 sda4 sda5
[  470.473937]  sda: sda1 sda2 sda3 sda4 sda5
[  471.191033]  sda: sda1 sda2 sda3 sda4 sda5
[  471.889499]  sda: sda1 sda2 sda3 sda4 sda5
[  472.589918]  sda: sda1 sda2 sda3 sda4 sda5
[  473.292267]  sda: sda1 sda2 sda3 sda4 sda5
[  474.214348]  sda: sda1 sda2 sda3 sda4 sda5
[  475.141977]  sda: sda1 sda2 sda3 sda4 sda5
[  476.070134]  sda: sda1 sda2 sda3 sda4 sda5
[  477.117821]  sda: sda1 sda2 sda3 sda4 sda5
[  478.164440]  sda: sda1 sda2 sda3 sda4 sda5
[  479.209315]  sda: sda1 sda2 sda3 sda4 sda5
[  482.038561]  sda: sda1 sda2 sda3 sda4
[  484.315219]  sda: sda1
[  485.042176]  sda: sda1
[  486.861932]  sda: sda1 sda2 sda3 sda4
[  487.583591]  sda: sda1 sda2 sda3 sda4
[  487.838095] sd 17:0:0:0: [sda] Synchronizing SCSI cache
[  488.455434] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  488.456228] scsi host18: scsi_debug: version 0191 [20210520]
[  488.456228]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  488.459211] scsi 18:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  488.462092] scsi 18:0:0:0: Power-on or device reset occurred
[  488.485344] sd 18:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  488.491066] sd 18:0:0:0: [sda] Write Protect is off
[  488.500096] sd 18:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  488.526156] sd 18:0:0:0: [sda] permanent stream count = 5
[  488.539391] sd 18:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  488.540119] sd 18:0:0:0: [sda] Optimal transfer size 524288 bytes
[  488.633083] sd 18:0:0:0: [sda] Attached SCSI disk
[  489.278789]  sda: sda1
[  491.450801]  sda: sda1
[  493.611938]  sda: sda1
[  495.929225]  sda: sda1
[  496.480927] sd 18:0:0:0: [sda] Synchronizing SCSI cache
[  497.099641] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  497.100474] scsi host19: scsi_debug: version 0191 [20210520]
[  497.100474]   dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0
[  497.103212] scsi 19:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  497.106057] scsi 19:0:0:0: Power-on or device reset occurred
[  497.128868] sd 19:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB)
[  497.134234] sd 19:0:0:0: [sda] Write Protect is off
[  497.143014] sd 19:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  497.168539] sd 19:0:0:0: [sda] permanent stream count = 5
[  497.181368] sd 19:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[  497.181960] sd 19:0:0:0: [sda] Optimal transfer size 524288 bytes
[  497.272479] sd 19:0:0:0: [sda] Attached SCSI disk
[  498.022514]  sda: sda1
[  498.563154]  sda: sda1
[  499.214300]  sda: sda1
[  499.834291]  sda: sda1
[  500.471908]  sda: sda1
[  501.106520]  sda: sda1
[  501.738373]  sda: sda1
[  502.400260]  sda: sda1
[  503.038640]  sda: sda1
[  503.686661]  sda: sda1
[  504.330555]  sda: sda1
[  504.984116]  sda: sda1
[  505.639929]  sda: sda1
[  506.417267]  sda: sda1 sda2
[  507.102761]  sda: sda1 sda2 sda3
[  507.677252]  sda: sda1 sda2 sda3
[  508.323115]  sda: sda1 sda2 sda3
[  509.858269]  sda: sda1
[  510.604339]  sda: sda1
[  511.441056]  sda: sda1
[  512.280610]  sda: sda1
[  513.152340]  sda: sda1
[  514.071468]  sda: sda1
[  514.953470]  sda: sda1
[  515.812213]  sda: sda1
[  516.640319]  sda: sda1
[  517.472402]  sda: sda1
[  518.308449]  sda: sda1
[  519.146148]  sda: sda1
[  519.993291]  sda: sda1
[  520.945180]  sda: sda1 sda2
[  521.836979]  sda: sda1 sda2 sda3
[  522.580955]  sda: sda1 sda2 sda3
[  523.439775]  sda: sda1 sda2 sda3
[  524.980238]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[  525.532664]  sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[  525.814098] sd 19:0:0:0: [sda] Synchronizing SCSI cache
[  526.374172] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  526.375029] scsi host20: scsi_debug: version 0191 [20210520]
[  526.375029]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  526.378085] scsi 20:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  526.380808] scsi 20:0:0:0: Power-on or device reset occurred
[  526.403848] sd 20:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  526.404570] sd 20:0:0:0: [sda] 4096-byte physical blocks
[  526.409754] sd 20:0:0:0: [sda] Write Protect is off
[  526.418618] sd 20:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  526.445743] sd 20:0:0:0: [sda] permanent stream count = 5
[  526.458647] sd 20:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[  526.459221] sd 20:0:0:0: [sda] Optimal transfer size 524288 bytes
[  526.548571] sd 20:0:0:0: [sda] Attached SCSI disk
[  527.826464]  sda: sda1 sda2 sda3 sda4
[  529.681908]  sda: sda1 sda2 sda3 sda4
[  531.586102]  sda: sda1 sda2 sda3 sda4
[  533.977242] sd 20:0:0:0: [sda] Synchronizing SCSI cache
[  534.534571] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1)
[  534.535461] scsi host21: scsi_debug: version 0191 [20210520]
[  534.535461]   dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0
[  534.538253] scsi 21:0:0:0: Direct-Access     Linux    scsi_debug       0191 PQ: 0 ANSI: 7
[  534.540978] scsi 21:0:0:0: Power-on or device reset occurred
[  534.564201] sd 21:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB)
[  534.564879] sd 21:0:0:0: [sda] 4096-byte physical blocks
[  534.570182] sd 21:0:0:0: [sda] Write Protect is off
[  534.579093] sd 21:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  534.604849] sd 21:0:0:0: [sda] permanent stream count = 5
[  534.617901] sd 21:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[  534.618482] sd 21:0:0:0: [sda] Optimal transfer size 524288 bytes
[  534.713162] sd 21:0:0:0: [sda] Attached SCSI disk
[  539.676454]  sda: sda1
[  541.364588]  sda: sda1
[  541.769132] sd 21:0:0:0: [sda] Synchronizing SCSI cache
[  543.105022] loop0: detected capacity change from 0 to 10240
[  543.172407] Adding 5116k swap on /dev/loop0.  Priority:-1 extents:1 across:5116k 
[  543.628184] loop0: detected capacity change from 0 to 10240
[  543.724126] Adding 5116k swap on /dev/loop0.  Priority:-1 extents:1 across:5116k 
[  544.153629] loop0: detected capacity change from 0 to 10240
[  544.255639] Adding 5116k swap on /dev/loop0.  Priority:-1 extents:1 across:5116k 
[  544.696459] loop0: detected capacity change from 0 to 10240
[  544.856570] Adding 5116k swap on /dev/loop0.  Priority:-1 extents:1 across:5116k 
[  545.308640] loop0: detected capacity change from 0 to 10240
[  545.465246] Adding 5116k swap on /dev/loop0.  Priority:-1 extents:1 across:5116k 
[  560.660417] udevd[12988]: starting version 3.2.14
[  560.679420] udevd[12989]: starting eudev-3.2.14
