[    0.000000] Linux version 7.2.8-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-musl-gcc (GCC) 16.2.0, GNU ld (GNU Binutils) 2.47.20260726) #1 SMP PREEMPT_DYNAMIC Mon Sep 28 18:07:23 UTC 2026
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff]  System RAM
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x00000000000a0000-0x00000000000effff]
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]  device reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff]  System RAM
[    0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x0000000080000000-0x00000000afffffff]
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x00000000c0000000-0x00000000fed1bfff]
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x00000000fed20000-0x00000000feffbfff]
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x00000000ff000000-0x00000000fffbffff]
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff]  device reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff]  System RAM
[    0.000000] BIOS-e820: [gap 0x00000001bec00000-0x000000fcffffffff]
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff]  device reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] DMI: SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 2370562188 cycles
[    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000004] tsc: Detected 2750.000 MHz processor
[    0.000800] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000
[    0.000833] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000836] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000883] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000
[    0.002784] found SMP MP-table at [mem 0x000f5490-0x000f549f]
[    0.005377] ACPI: Early table checksum verification disabled
[    0.005381] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )
[    0.005386] ACPI: RSDT 0x000000007FFE249C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005390] ACPI: FACP 0x000000007FFE227C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005394] ACPI: DSDT 0x000000007FFE0040 00223C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005396] ACPI: FACS 0x000000007FFE0000 000040
[    0.005398] ACPI: APIC 0x000000007FFE2370 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005405] ACPI: HPET 0x000000007FFE2400 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005407] ACPI: MCFG 0x000000007FFE2438 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005408] ACPI: WAET 0x000000007FFE2474 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.005410] ACPI: Reserving FACP table memory at [mem 0x7ffe227c-0x7ffe236f]
[    0.005411] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe227b]
[    0.005411] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[    0.005412] ACPI: Reserving APIC table memory at [mem 0x7ffe2370-0x7ffe23ff]
[    0.005412] ACPI: Reserving HPET table memory at [mem 0x7ffe2400-0x7ffe2437]
[    0.005413] ACPI: Reserving MCFG table memory at [mem 0x7ffe2438-0x7ffe2473]
[    0.005413] ACPI: Reserving WAET table memory at [mem 0x7ffe2474-0x7ffe249b]
[    0.006199] ACPI: PM-Timer IO Port: 0x608
[    0.006209] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.006232] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.006234] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.006236] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.006237] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.006237] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.006238] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.006240] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.006241] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.006244] TSC deadline timer available
[    0.006246] CPU topo: Max. logical packages:   1
[    0.006247] CPU topo: Max. logical nodes:      1
[    0.006247] CPU topo: Num. nodes per package:  1
[    0.006249] CPU topo: Max. logical dies:       1
[    0.006249] CPU topo: Max. dies per package:   1
[    0.006252] CPU topo: Max. threads per core:   1
[    0.006253] CPU topo: Num. cores per package:     4
[    0.006253] CPU topo: Num. threads per package:   4
[    0.006253] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.006264] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.006278] [gap 0xc0000000-0xfed1bfff] available for PCI devices
[    0.006279] Booting paravirtualized kernel on KVM
[    0.006280] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.006303] Zone ranges:
[    0.006303]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006305]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006306]   Normal   [mem 0x0000000100000000-0x00000001bebfffff]
[    0.006307] Movable zone start for each node
[    0.006307] Early memory node ranges
[    0.006307]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.006308]   node   0: [mem 0x0000000000100000-0x000000007ffd7fff]
[    0.006309]   node   0: [mem 0x0000000100000000-0x00000001bebfffff]
[    0.006310] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff]
[    0.008861] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008881] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.265237] On node 0, zone Normal: 40 pages in unavailable ranges
[    0.265267] On node 0, zone Normal: 5120 pages in unavailable ranges
[    0.265274] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.267575] percpu: Embedded 54 pages/cpu s183576 r8192 d29416 u524288
[    0.267602] Kernel command line: root=/dev/vda rw  ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.267668] random: crng init done
[    0.267669] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[    0.279853] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.285435] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.285481] software IO TLB: area num 4.
[    0.285482] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[    0.285549] Built 1 zonelists, mobility grouping on.  Total pages: 1305462
[    0.288823] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.308531] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.320829] ftrace: allocating 57868 entries in 228 pages
[    0.320832] ftrace: allocated 228 pages with 4 groups
[    0.320879] Dynamic Preempt: full
[    0.323082] rcu: Preemptible hierarchical RCU implementation.
[    0.323083] rcu: 	RCU event tracing is enabled.
[    0.323084] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.323086] 	All grace periods are expedited (rcu_expedited).
[    0.323086] 	Trampoline variant of Tasks RCU enabled.
[    0.323087] 	Rude variant of Tasks RCU enabled.
[    0.323087] 	Tracing variant of Tasks RCU enabled.
[    0.323088] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.323089] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.323096] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.323098] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.354165] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.354377] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.354386] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.354475] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.364100] Console: colour VGA+ 80x25
[    0.364168] printk: legacy console [ttyS0] enabled
[    0.657464] ACPI: Core revision 20260408
[    0.659033] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.662258] APIC: Switch to symmetric I/O mode setup
[    0.664347] x2apic enabled
[    0.665763] APIC: Switched APIC routing to: physical x2apic
[    0.669287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.671598] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.675587] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.676778] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.677589] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.678592] mitigations: Enabled attack vectors: user_kernel, user_user, SMT mitigations: auto
[    0.679590] Speculative Store Bypass: Vulnerable
[    0.680590] Spectre V2 : Mitigation: Retpolines
[    0.681589] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.682589] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.683611] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.684589] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.685590] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.686590] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.687589] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.711784] pid_max: default: 32768 minimum: 301
[    0.712647] landlock: Up and running.
[    0.713620] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.714593] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.715640] VFS: Finished mounting rootfs on nullfs
[    0.716806] smpboot: CPU0: AMD Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.717716] Performance Events: PMU not available due to virtualization, using software events only.
[    0.718622] signal: max sigframe size: 1776
[    0.719624] rcu: Hierarchical SRCU implementation.
[    0.720591] rcu: 	Max phase no-delay instances is 400.
[    0.721629] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.723751] smp: Bringing up secondary CPUs ...
[    0.724679] smpboot: x86: Booting SMP configuration:
[    0.725599] .... node  #0, CPUs:      #1 #2 #3
[    0.759624] smp: Brought up 1 node, 4 CPUs
[    0.761592] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.762862] Memory: 5079048K/5221848K available (21792K kernel code, 2592K rwdata, 6604K rodata, 3804K init, 524K bss, 137136K reserved, 0K cma-reserved)
[    0.767653] devtmpfs: initialized
[    0.768886] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.769610] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[    0.770666] xor: automatically using best checksumming function   avx       
[    0.772777] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.773817] thermal_sys: Registered thermal governor 'step_wise'
[    0.773835] cpuidle: using governor menu
[    0.775747] Freeing SMP alternatives memory: 64K
[    0.776771] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.777596] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.778607] PCI: Using configuration type 1 for base access
[    0.779670] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.807965] raid6: using avx2x2 recovery algorithm
[    0.827310] raid6: avx2x1   gen() 20258 MB/s
[    0.844976] raid6: avx2x2   gen() 26994 MB/s
[    0.862976] raid6: avx2x4   gen() 28754 MB/s
[    0.864748] raid6: using algorithm avx2x4 gen() 28754 MB/s
[    0.883139] raid6: .... xor() 4467 MB/s, rmw enabled
[    0.884687] ACPI: Added _OSI(Module Device)
[    0.886592] ACPI: Added _OSI(Processor Device)
[    0.888592] ACPI: Added _OSI(Processor Aggregator Device)
[    0.890343] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.895604] ACPI: \_SB_: platform _OSC: OS support mask [002a7eee]
[    0.896888] ACPI: Interpreter enabled
[    0.897608] ACPI: PM: (supports S0 S3 S5)
[    0.898594] ACPI: Using IOAPIC for interrupt routing
[    0.899640] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.900593] PCI: Using E820 reservations for host bridge windows
[    0.901768] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.906917] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.907599] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.908692] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.909764] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.910689] PCI host bridge to bus 0000:00
[    0.911599] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.912594] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.913595] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.914593] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
[    0.915594] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.916593] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window]
[    0.917593] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.918687] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.920575] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    0.922615] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[    0.923623] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[    0.924650] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.925717] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.927039] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.929447] pci 0000:00:02.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.929605] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.930641] pci 0000:00:02.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref]
[    0.931609] pci 0000:00:02.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.933956] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.936360] pci 0000:00:03.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.936605] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[    0.937641] pci 0000:00:03.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref]
[    0.939688] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.942619] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.943604] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.944642] pci 0000:00:04.0: BAR 4 [mem 0xc000008000-0xc00000bfff 64bit pref]
[    0.946803] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.948517] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.948859] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.950364] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.950857] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.952371] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.952904] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.954396] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.954988] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.956205] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.956958] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.958654] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.959605] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.961153] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.962592] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.967575] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.967713] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.968696] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.969698] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.970697] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.971727] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.972724] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.973726] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.974661] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.975607] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.976608] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.977614] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.978608] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.979613] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.980606] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.981608] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.983085] iommu: Default domain type: Translated
[    0.983593] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.984652] SCSI subsystem initialized
[    0.985636] ACPI: bus type USB registered
[    0.986615] usbcore: registered new interface driver usbfs
[    0.987602] usbcore: registered new interface driver hub
[    0.988603] usbcore: registered new device driver usb
[    0.989612] pps_core: LinuxPPS API ver. 1 registered
[    0.990592] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.991599] PTP clock support registered
[    0.992802] Bluetooth: Core ver 2.22
[    0.993602] NET: Registered PF_BLUETOOTH protocol family
[    0.994593] Bluetooth: HCI device and connection manager initialized
[    0.995595] Bluetooth: HCI socket layer initialized
[    0.996594] Bluetooth: L2CAP socket layer initialized
[    0.997597] Bluetooth: SCO socket layer initialized
[    0.998631] PCI: Using ACPI for IRQ routing
[    1.101772] e820: register RAM buffer resource [mem 0x0009fc00-0x0009ffff]
[    1.102600] e820: register RAM buffer resource [mem 0x7ffd8000-0x7fffffff]
[    1.103592] e820: register RAM buffer resource [mem 0x1bec00000-0x1bfffffff]
[    1.104658] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    1.105586] pci 0000:00:01.0: vgaarb: bridge control possible
[    1.105586] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.105595] vgaarb: loaded
[    1.106569] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.106592] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    1.110660] clocksource: Switched to clocksource kvm-clock
[    1.135027] acpi PNP0C01:00: Reserved [mem 0xb0000000-0xbfffffff]
[    1.137309] pnp: PnP ACPI init
[    1.138437] ACPI: IRQ 3 override to edge(!), high(!)
[    1.140179] ACPI: IRQ 4 override to edge(!), high(!)
[    1.146141] pnp: PnP ACPI: found 3 devices
[    1.153960] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.157000] NET: Registered PF_INET protocol family
[    1.162478] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.166075] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.169077] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.171921] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.174610] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.189599] TCP: Hash tables configured (established 65536 bind 65536)
[    1.192244] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    1.195032] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.197558] RPC: Registered named UNIX socket transport module.
[    1.199917] RPC: Registered udp transport module.
[    1.201658] RPC: Registered tcp transport module.
[    1.203260] RPC: Registered tcp-with-tls transport module.
[    1.205108] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.207306] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.209418] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.211515] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.213848] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
[    1.216160] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    1.218533] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window]
[    1.221476] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    1.223717] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    1.225877] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    1.227990] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    1.230268] PCI: CLS 0 bytes, default 64
[    1.231732] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.233935] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB)
[    1.236615] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    1.240638] Initialise system trusted keyrings
[    1.242397] workingset: timestamp_bits=46 (anon: 41) max_order=21 bucket_order=0 (anon: 0)
[    1.245481] NFS: Registering the id_resolver key type
[    1.247207] Key type id_resolver registered
[    1.248637] Key type id_legacy registered
[    1.250014] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.252260] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.254908] Key type cifs.idmap registered
[    1.256396] Key type asymmetric registered
[    1.257775] Asymmetric key parser 'x509' registered
[    1.259418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.261931] io scheduler mq-deadline registered
[    1.263441] io scheduler kyber registered
[    1.264814] io scheduler bfq registered
[    1.266379] input: Power Button as /devices/platform/LNXPWRBN:00/input/input0
[    1.268851] ACPI: button: Power Button [PWRF]
[    1.270842] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    1.274102] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    1.277136] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    1.280244] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.282583] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.287603] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.292699] ACPI: bus type drm_connector registered
[    1.295170] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
[    1.303219] Console: switching to colour dummy device 80x25
[    1.305465] [drm] Found bochs VGA, ID 0xb0c5.
[    1.307092] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[    1.309856] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
[    1.384605] Console: switching to colour frame buffer device 160x50
[    1.426801] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.431639] brd: module loaded
[    1.433771] loop: module loaded
[    1.435284] virtio_blk virtio2: 4/0/0 default/read/poll queues
[    1.439490] virtio_blk virtio2: [vda] 1117968 512-byte logical blocks (572 MB/546 MiB)
[    1.445126] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    1.448240] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    1.450712] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    1.454334] scsi host0: ahci
[    1.455674] scsi host1: ahci
[    1.457005] scsi host2: ahci
[    1.458298] scsi host3: ahci
[    1.459596] scsi host4: ahci
[    1.461122] scsi host5: ahci
[    1.462297] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 31 lpm-pol 1
[    1.465425] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 31 lpm-pol 1
[    1.468532] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 31 lpm-pol 1
[    1.471625] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 31 lpm-pol 1
[    1.474751] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 31 lpm-pol 1
[    1.477794] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 31 lpm-pol 1
[    1.483081] e100: Intel(R) PRO/100 Network Driver
[    1.484832] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.486896] e1000: Intel(R) PRO/1000 Network Driver
[    1.488745] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.490916] e1000e: Intel(R) PRO/1000 Network Driver
[    1.492750] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.494987] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.497003] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.501019] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.503189] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.521578] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    1.529282] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.531803] hub 1-0:1.0: USB hub found
[    1.533244] hub 1-0:1.0: 6 ports detected
[    1.535049] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.537100] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.540067] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    1.542519] hub 2-0:1.0: USB hub found
[    1.543971] hub 2-0:1.0: 2 ports detected
[    1.546530] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.548577] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.551560] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    1.555082] hub 3-0:1.0: USB hub found
[    1.556745] hub 3-0:1.0: 2 ports detected
[    1.559114] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.561106] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.564130] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    1.566568] hub 4-0:1.0: USB hub found
[    1.568029] hub 4-0:1.0: 2 ports detected
[    1.569815] usbcore: registered new interface driver usb-storage
[    1.572154] usbcore: registered new interface driver usbserial_generic
[    1.574743] usbserial: USB Serial support registered for generic
[    1.577032] usbcore: registered new interface driver ftdi_sio
[    1.579210] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.581993] usbcore: registered new interface driver pl2303
[    1.584076] usbserial: USB Serial support registered for pl2303
[    1.586343] i8042: PNP: No PS/2 controller found.
[    1.588230] mousedev: PS/2 mouse device common for all mice
[    1.590572] rtc_cmos PNP0B00:00: RTC can wake from S4
[    1.593286] rtc_cmos PNP0B00:00: registered as rtc0
[    1.595281] rtc_cmos PNP0B00:00: setting system clock to 2026-10-17T11:40:04 UTC (1792237204)
[    1.598549] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    1.601861] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    1.601896] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.605342] usbcore: registered new interface driver usbhid
[    1.607471] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    1.609481] usbhid: USB HID core driver
[    1.609505] u32 classifier
[    1.609506]     input device check on
[    1.609506]     Actions configured
[    1.609581] NET: Registered PF_INET6 protocol family
[    1.619760] Segment Routing with IPv6
[    1.621176] In-situ OAM (IOAM) with IPv6
[    1.622681] NET: Registered PF_PACKET protocol family
[    1.624633] Bridge firewalling registered
[    1.626211] l2tp_core: L2TP core driver, V2.0
[    1.627858] Key type dns_resolver registered
[    1.629645] NET: Registered PF_VSOCK protocol family
[    1.632006] IPI shorthand broadcast: enabled
[    1.635326] sched_clock: Marking stable (1320016440, 315201283)->(1855768175, -220550452)
[    1.638567] registered taskstats version 1
[    1.640166] Loading compiled-in X.509 certificates
[    1.643320] Key type .fscrypt registered
[    1.644903] Key type fscrypt-provisioning registered
[    1.647079] Btrfs loaded, zoned=no, fsverity=no
[    1.649468] Key type encrypted registered
[    1.651064] netconsole: network logging started
[    1.773231] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.787267] ata1: SATA link down (SStatus 0 SControl 300)
[    1.789627] ata6: SATA link down (SStatus 0 SControl 300)
[    1.792127] ata2: SATA link down (SStatus 0 SControl 300)
[    1.794560] ata5: SATA link down (SStatus 0 SControl 300)
[    1.796899] ata4: SATA link down (SStatus 0 SControl 300)
[    1.799447] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.802047] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.804746] ata3.00: applying bridge limits
[    1.807059] ata3.00: configured for UDMA/100
[    1.809239] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.824507] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.843484] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.864226] IP-Config: Complete:
[    1.865512]      device=eth0, hwaddr=52:54:00:12:34:0e, ipaddr=192.168.7.14, mask=255.255.255.0, gw=192.168.7.13
[    1.869256]      host=192.168.7.14, domain=, nis-domain=(none)
[    1.871392]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.871394]      nameserver0=8.8.8.8
[    1.875579] clk: Disabling unused clocks
[    1.878483] md: Waiting for all devices to be available before autodetect
[    1.880382] md: If you don't use raid, use raid=noautodetect
[    1.881947] md: Autodetecting RAID arrays.
[    1.883082] md: autorun ...
[    1.883886] md: ... autorun DONE.
[    1.888786] EXT4-fs (vda): mounted filesystem ee4be785-a819-46eb-86e6-301f4bc69ac8 r/w with ordered data mode. Quota mode: disabled.
[    1.892054] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.893876] devtmpfs: mounted
[    1.894767] VFS: Pivoted into new rootfs
[    1.896469] Freeing unused kernel image (initmem) memory: 3804K
[    1.898138] Write protecting the kernel read-only data: 30720k
[    1.899906] Freeing unused kernel image (text/rodata gap) memory: 732K
[    1.901887] Freeing unused kernel image (rodata/data gap) memory: 1588K
[    1.903701] Run /sbin/init as init process
INIT: version 3.14 booting
[    1.919910] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.923407] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
Starting udev
[    2.000070] udevd[141]: starting version 3.2.14
[    2.004970] udevd[142]: starting eudev-3.2.14
[    2.040286] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    2.171930] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    2.226564] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    2.287574] EXT4-fs (vda): re-mounted ee4be785-a819-46eb-86e6-301f4bc69ac8.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh ECDSA host key...
  generating ssh ML-DSA-44/ED25519 host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 6.1.99+snapshot-403e82d6d2651725933b75db8b8837008115dbf0 qemux86-64 /dev/ttyS0

Type 'root' to login with superuser privileges (no password will be asked).

qemux86-64 login: [   13.091180] __vm_enough_memory: pid: 401, comm: python3, bytes: 4398046511104 not enough memory for the allocation
[   15.491857] __vm_enough_memory: pid: 401, comm: python3, bytes: 4398046511104 not enough memory for the allocation
[   15.515462] __vm_enough_memory: pid: 401, comm: python3, bytes: 4398046511104 not enough memory for the allocation
[   15.529757] __vm_enough_memory: pid: 401, comm: python3, bytes: 4398046511104 not enough memory for the allocation
