[    0.000000] Linux version 7.2.8-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-musl-gcc (GCC) 16.2.0, GNU ld (GNU Binutils) 2.47.20260726) #1 SMP PREEMPT_DYNAMIC Mon Sep 28 18:07:23 UTC 2026
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff]  System RAM
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x00000000000a0000-0x00000000000effff]
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff]  device reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffd7fff]  System RAM
[    0.000000] BIOS-e820: [mem 0x000000007ffd8000-0x000000007fffffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x0000000080000000-0x00000000afffffff]
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x00000000c0000000-0x00000000fed1bfff]
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x00000000fed20000-0x00000000feffbfff]
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff]  device reserved
[    0.000000] BIOS-e820: [gap 0x00000000ff000000-0x00000000fffbffff]
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff]  device reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bebfffff]  System RAM
[    0.000000] BIOS-e820: [gap 0x00000001bec00000-0x000000fcffffffff]
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff]  device reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] DMI: SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 851198380 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2750.000 MHz processor
[    0.000802] last_pfn = 0x1bec00 max_arch_pfn = 0x400000000
[    0.000839] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000842] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000896] last_pfn = 0x7ffd8 max_arch_pfn = 0x400000000
[    0.002772] found SMP MP-table at [mem 0x000f5490-0x000f549f]
[    0.004912] ACPI: Early table checksum verification disabled
[    0.004915] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )
[    0.004920] ACPI: RSDT 0x000000007FFE249C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004925] ACPI: FACP 0x000000007FFE227C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004929] ACPI: DSDT 0x000000007FFE0040 00223C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004931] ACPI: FACS 0x000000007FFE0000 000040
[    0.004932] ACPI: APIC 0x000000007FFE2370 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004934] ACPI: HPET 0x000000007FFE2400 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004935] ACPI: MCFG 0x000000007FFE2438 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004937] ACPI: WAET 0x000000007FFE2474 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004938] ACPI: Reserving FACP table memory at [mem 0x7ffe227c-0x7ffe236f]
[    0.004939] ACPI: Reserving DSDT table memory at [mem 0x7ffe0040-0x7ffe227b]
[    0.004940] ACPI: Reserving FACS table memory at [mem 0x7ffe0000-0x7ffe003f]
[    0.004940] ACPI: Reserving APIC table memory at [mem 0x7ffe2370-0x7ffe23ff]
[    0.004940] ACPI: Reserving HPET table memory at [mem 0x7ffe2400-0x7ffe2437]
[    0.004941] ACPI: Reserving MCFG table memory at [mem 0x7ffe2438-0x7ffe2473]
[    0.004941] ACPI: Reserving WAET table memory at [mem 0x7ffe2474-0x7ffe249b]
[    0.005778] ACPI: PM-Timer IO Port: 0x608
[    0.005788] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.005814] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.005816] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.005817] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.005818] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.005819] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.005820] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.005822] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.005823] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.005825] TSC deadline timer available
[    0.005827] CPU topo: Max. logical packages:   1
[    0.005828] CPU topo: Max. logical nodes:      1
[    0.005828] CPU topo: Num. nodes per package:  1
[    0.005830] CPU topo: Max. logical dies:       1
[    0.005830] CPU topo: Max. dies per package:   1
[    0.005834] CPU topo: Max. threads per core:   1
[    0.005834] CPU topo: Num. cores per package:     4
[    0.005834] CPU topo: Num. threads per package:   4
[    0.005835] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.005845] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.005860] [gap 0xc0000000-0xfed1bfff] available for PCI devices
[    0.005861] Booting paravirtualized kernel on KVM
[    0.005862] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.005885] Zone ranges:
[    0.005885]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.005886]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.005887]   Normal   [mem 0x0000000100000000-0x00000001bebfffff]
[    0.005888] Movable zone start for each node
[    0.005889] Early memory node ranges
[    0.005889]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.005890]   node   0: [mem 0x0000000000100000-0x000000007ffd7fff]
[    0.005891]   node   0: [mem 0x0000000100000000-0x00000001bebfffff]
[    0.005892] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bebfffff]
[    0.032994] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.033015] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.284752] On node 0, zone Normal: 40 pages in unavailable ranges
[    0.284787] On node 0, zone Normal: 5120 pages in unavailable ranges
[    0.284794] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.285106] percpu: Embedded 54 pages/cpu s183576 r8192 d29416 u524288
[    0.285141] Kernel command line: root=/dev/vda rw  ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.285226] random: crng init done
[    0.285226] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[    0.291717] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.308772] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.308812] software IO TLB: area num 4.
[    0.308813] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB
[    0.308868] Built 1 zonelists, mobility grouping on.  Total pages: 1305462
[    0.310310] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.315825] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.326725] ftrace: allocating 57868 entries in 228 pages
[    0.326727] ftrace: allocated 228 pages with 4 groups
[    0.326757] Dynamic Preempt: full
[    0.326946] rcu: Preemptible hierarchical RCU implementation.
[    0.326946] rcu: 	RCU event tracing is enabled.
[    0.326947] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.326948] 	All grace periods are expedited (rcu_expedited).
[    0.326949] 	Trampoline variant of Tasks RCU enabled.
[    0.326949] 	Rude variant of Tasks RCU enabled.
[    0.326950] 	Tracing variant of Tasks RCU enabled.
[    0.326950] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.326951] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.326956] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.326957] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.333276] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.333456] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.333463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.333531] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.342842] Console: colour VGA+ 80x25
[    0.342903] printk: legacy console [ttyS0] enabled
[    0.607772] ACPI: Core revision 20260408
[    0.609281] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.612417] APIC: Switch to symmetric I/O mode setup
[    0.614309] x2apic enabled
[    0.615538] APIC: Switched APIC routing to: physical x2apic
[    0.618507] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.620544] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.624001] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.625172] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.626003] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.627005] mitigations: Enabled attack vectors: user_kernel, user_user, SMT mitigations: auto
[    0.628003] Speculative Store Bypass: Vulnerable
[    0.629003] Spectre V2 : Mitigation: Retpolines
[    0.630003] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.631003] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.632019] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.633003] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.634003] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.635004] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.636003] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.657774] pid_max: default: 32768 minimum: 301
[    0.658048] landlock: Up and running.
[    0.659028] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.660007] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.661042] VFS: Finished mounting rootfs on nullfs
[    0.662193] smpboot: CPU0: AMD Intel Core Processor (Skylake) (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.663122] Performance Events: PMU not available due to virtualization, using software events only.
[    0.664019] signal: max sigframe size: 1776
[    0.665032] rcu: Hierarchical SRCU implementation.
[    0.666006] rcu: 	Max phase no-delay instances is 400.
[    0.667037] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.668498] smp: Bringing up secondary CPUs ...
[    0.669081] smpboot: x86: Booting SMP configuration:
[    0.670014] .... node  #0, CPUs:      #1 #2 #3
[    0.704020] smp: Brought up 1 node, 4 CPUs
[    0.706006] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.707257] Memory: 5079040K/5221848K available (21792K kernel code, 2592K rwdata, 6604K rodata, 3804K init, 524K bss, 137140K reserved, 0K cma-reserved)
[    0.709027] devtmpfs: initialized
[    0.710139] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.711010] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[    0.712037] xor: automatically using best checksumming function   avx       
[    0.714106] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.715108] thermal_sys: Registered thermal governor 'step_wise'
[    0.715118] cpuidle: using governor menu
[    0.717123] Freeing SMP alternatives memory: 64K
[    0.718145] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.719008] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.720012] PCI: Using configuration type 1 for base access
[    0.721045] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.723416] raid6: using avx2x2 recovery algorithm
[    0.741003] raid6: avx2x1   gen() 39908 MB/s
[    0.759004] raid6: avx2x2   gen() 50663 MB/s
[    0.777004] raid6: avx2x4   gen() 47263 MB/s
[    0.778093] raid6: using algorithm avx2x2 gen() 50663 MB/s
[    0.796004] raid6: .... xor() 38064 MB/s, rmw enabled
[    0.797067] ACPI: Added _OSI(Module Device)
[    0.798006] ACPI: Added _OSI(Processor Device)
[    0.799006] ACPI: Added _OSI(Processor Aggregator Device)
[    0.800697] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.801329] ACPI: \_SB_: platform _OSC: OS support mask [002a7eee]
[    0.802097] ACPI: Interpreter enabled
[    0.803015] ACPI: PM: (supports S0 S3 S5)
[    0.804006] ACPI: Using IOAPIC for interrupt routing
[    0.805028] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.806006] PCI: Using E820 reservations for host bridge windows
[    0.807075] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.809931] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.810017] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.811043] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.812053] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.813051] PCI host bridge to bus 0000:00
[    0.814009] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.815006] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.816006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.817006] pci_bus 0000:00: root bus resource [mem 0x80000000-0xafffffff window]
[    0.818006] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.819007] pci_bus 0000:00: root bus resource [mem 0xc000000000-0xc7ffffffff window]
[    0.820006] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.821080] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.822841] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    0.824758] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[    0.825034] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]
[    0.826060] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.827086] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.828431] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.830711] pci 0000:00:02.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.831020] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.832064] pci 0000:00:02.0: BAR 4 [mem 0xc000000000-0xc000003fff 64bit pref]
[    0.833020] pci 0000:00:02.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.835153] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.837019] pci 0000:00:03.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.838021] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]
[    0.839060] pci 0000:00:03.0: BAR 4 [mem 0xc000004000-0xc000007fff 64bit pref]
[    0.841210] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.843102] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.844022] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.845059] pci 0000:00:04.0: BAR 4 [mem 0xc000008000-0xc00000bfff 64bit pref]
[    0.847308] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.849432] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.850310] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.852006] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.853301] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.855021] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.856350] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.857964] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.858412] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.859674] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.860392] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.862059] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.863020] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.864589] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.865837] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.869532] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.870117] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.871121] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.872120] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.873114] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.874113] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.875113] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.876126] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.877071] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.878018] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.879016] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.880015] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.881016] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.882016] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.883015] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.884016] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.885378] iommu: Default domain type: Translated
[    0.886007] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.887044] SCSI subsystem initialized
[    0.888034] ACPI: bus type USB registered
[    0.889020] usbcore: registered new interface driver usbfs
[    0.890015] usbcore: registered new interface driver hub
[    0.891014] usbcore: registered new device driver usb
[    0.892018] pps_core: LinuxPPS API ver. 1 registered
[    0.893006] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.894012] PTP clock support registered
[    0.895143] Bluetooth: Core ver 2.22
[    0.896013] NET: Registered PF_BLUETOOTH protocol family
[    0.897006] Bluetooth: HCI device and connection manager initialized
[    0.898007] Bluetooth: HCI socket layer initialized
[    0.899007] Bluetooth: L2CAP socket layer initialized
[    0.900014] Bluetooth: SCO socket layer initialized
[    0.902022] PCI: Using ACPI for IRQ routing
[    1.009747] e820: register RAM buffer resource [mem 0x0009fc00-0x0009ffff]
[    1.010011] e820: register RAM buffer resource [mem 0x7ffd8000-0x7fffffff]
[    1.011006] e820: register RAM buffer resource [mem 0x1bec00000-0x1bfffffff]
[    1.012040] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    1.013001] pci 0000:00:01.0: vgaarb: bridge control possible
[    1.013001] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.013007] vgaarb: loaded
[    1.013947] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.014006] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    1.018053] clocksource: Switched to clocksource kvm-clock
[    1.019999] acpi PNP0C01:00: Reserved [mem 0xb0000000-0xbfffffff]
[    1.022056] pnp: PnP ACPI init
[    1.023145] ACPI: IRQ 3 override to edge(!), high(!)
[    1.024832] ACPI: IRQ 4 override to edge(!), high(!)
[    1.026821] pnp: PnP ACPI: found 3 devices
[    1.033772] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.036739] NET: Registered PF_INET protocol family
[    1.039190] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.042636] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.045455] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.047990] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.051615] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.055056] TCP: Hash tables configured (established 65536 bind 65536)
[    1.057229] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    1.059505] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.061524] RPC: Registered named UNIX socket transport module.
[    1.063490] RPC: Registered udp transport module.
[    1.065050] RPC: Registered tcp transport module.
[    1.066625] RPC: Registered tcp-with-tls transport module.
[    1.068441] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.070552] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.072588] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.074623] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.076887] pci_bus 0000:00: resource 7 [mem 0x80000000-0xafffffff window]
[    1.079154] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    1.081423] pci_bus 0000:00: resource 9 [mem 0xc000000000-0xc7ffffffff window]
[    1.084026] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    1.086109] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    1.088229] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    1.090282] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    1.092424] PCI: CLS 0 bytes, default 64
[    1.093824] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.095944] software IO TLB: mapped [mem 0x000000007fed8000-0x000000007ffd8000] (1MB)
[    1.098552] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    1.102253] Initialise system trusted keyrings
[    1.104318] workingset: timestamp_bits=46 (anon: 41) max_order=21 bucket_order=0 (anon: 0)
[    1.107155] NFS: Registering the id_resolver key type
[    1.108842] Key type id_resolver registered
[    1.110235] Key type id_legacy registered
[    1.111565] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.113879] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    1.116531] Key type cifs.idmap registered
[    1.117988] Key type asymmetric registered
[    1.119374] Asymmetric key parser 'x509' registered
[    1.121008] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.123460] io scheduler mq-deadline registered
[    1.124953] io scheduler kyber registered
[    1.126318] io scheduler bfq registered
[    1.127744] input: Power Button as /devices/platform/LNXPWRBN:00/input/input0
[    1.130129] ACPI: button: Power Button [PWRF]
[    1.131963] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    1.135063] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    1.138145] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    1.141134] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.143469] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.146131] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.150662] ACPI: bus type drm_connector registered
[    1.152283] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console
[    1.158794] Console: switching to colour dummy device 80x25
[    1.160711] [drm] Found bochs VGA, ID 0xb0c5.
[    1.162150] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.
[    1.164627] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0
[    1.230636] Console: switching to colour frame buffer device 160x50
[    1.259295] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.267357] brd: module loaded
[    1.268904] loop: module loaded
[    1.270158] virtio_blk virtio2: 4/0/0 default/read/poll queues
[    1.273848] virtio_blk virtio2: [vda] 1118320 512-byte logical blocks (573 MB/546 MiB)
[    1.278412] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    1.281068] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    1.283180] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    1.287006] scsi host0: ahci
[    1.288095] scsi host1: ahci
[    1.289166] scsi host2: ahci
[    1.290244] scsi host3: ahci
[    1.291304] scsi host4: ahci
[    1.292361] scsi host5: ahci
[    1.293353] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 31 lpm-pol 1
[    1.296014] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 31 lpm-pol 1
[    1.298712] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 31 lpm-pol 1
[    1.301429] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 31 lpm-pol 1
[    1.304067] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 31 lpm-pol 1
[    1.306748] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 31 lpm-pol 1
[    1.311511] e100: Intel(R) PRO/100 Network Driver
[    1.313037] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.314810] e1000: Intel(R) PRO/1000 Network Driver
[    1.316401] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.318273] e1000e: Intel(R) PRO/1000 Network Driver
[    1.319881] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.321829] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.323598] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.343580] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.345670] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.349182] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    1.356582] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.358626] hub 1-0:1.0: USB hub found
[    1.359867] hub 1-0:1.0: 6 ports detected
[    1.361401] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.363148] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.365723] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    1.367792] hub 2-0:1.0: USB hub found
[    1.369053] hub 2-0:1.0: 2 ports detected
[    1.370999] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.372794] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.375394] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    1.377460] hub 3-0:1.0: USB hub found
[    1.378727] hub 3-0:1.0: 2 ports detected
[    1.380553] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.382306] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.384947] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    1.387018] hub 4-0:1.0: USB hub found
[    1.388284] hub 4-0:1.0: 2 ports detected
[    1.389753] usbcore: registered new interface driver usb-storage
[    1.391855] usbcore: registered new interface driver usbserial_generic
[    1.394011] usbserial: USB Serial support registered for generic
[    1.396051] usbcore: registered new interface driver ftdi_sio
[    1.397983] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.400426] usbcore: registered new interface driver pl2303
[    1.402319] usbserial: USB Serial support registered for pl2303
[    1.404347] i8042: PNP: No PS/2 controller found.
[    1.405942] mousedev: PS/2 mouse device common for all mice
[    1.407885] rtc_cmos PNP0B00:00: RTC can wake from S4
[    1.410264] rtc_cmos PNP0B00:00: registered as rtc0
[    1.411977] rtc_cmos PNP0B00:00: setting system clock to 2026-10-20T07:31:26 UTC (1792481486)
[    1.414828] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    1.417600] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[    1.417749] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.420618] usbcore: registered new interface driver usbhid
[    1.422490] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    1.424226] usbhid: USB HID core driver
[    1.427966] u32 classifier
[    1.428884]     input device check on
[    1.430090]     Actions configured
[    1.431279] NET: Registered PF_INET6 protocol family
[    1.433121] Segment Routing with IPv6
[    1.434347] In-situ OAM (IOAM) with IPv6
[    1.435642] NET: Registered PF_PACKET protocol family
[    1.437289] Bridge firewalling registered
[    1.438607] l2tp_core: L2TP core driver, V2.0
[    1.440033] Key type dns_resolver registered
[    1.441465] NET: Registered PF_VSOCK protocol family
[    1.443313] IPI shorthand broadcast: enabled
[    1.445732] sched_clock: Marking stable (1160001909, 285538140)->(1636704720, -191164671)
[    1.448441] registered taskstats version 1
[    1.449828] Loading compiled-in X.509 certificates
[    1.453306] Key type .fscrypt registered
[    1.454600] Key type fscrypt-provisioning registered
[    1.456380] Btrfs loaded, zoned=no, fsverity=no
[    1.458216] Key type encrypted registered
[    1.459588] netconsole: network logging started
[    1.594570] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.616315] ata4: SATA link down (SStatus 0 SControl 300)
[    1.618479] ata2: SATA link down (SStatus 0 SControl 300)
[    1.620520] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.622912] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.625002] ata3.00: applying bridge limits
[    1.626793] ata5: SATA link down (SStatus 0 SControl 300)
[    1.628849] ata1: SATA link down (SStatus 0 SControl 300)
[    1.630700] ata3.00: configured for UDMA/100
[    1.632579] ata6: SATA link down (SStatus 0 SControl 300)
[    1.634757] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.651785] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.666694] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.685553] IP-Config: Complete:
[    1.686779]      device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15
[    1.690513]      host=192.168.7.16, domain=, nis-domain=(none)
[    1.692672]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.692675]      nameserver0=8.8.8.8
[    1.696852] clk: Disabling unused clocks
[    1.698769] md: Waiting for all devices to be available before autodetect
[    1.700778] md: If you don't use raid, use raid=noautodetect
[    1.702477] md: Autodetecting RAID arrays.
[    1.703712] md: autorun ...
[    1.704580] md: ... autorun DONE.
[    1.707114] EXT4-fs (vda): mounted filesystem 6dedf79d-1044-4db6-8809-9a44d1c5a13e r/w with ordered data mode. Quota mode: disabled.
[    1.710582] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.712494] devtmpfs: mounted
[    1.713528] VFS: Pivoted into new rootfs
[    1.715299] Freeing unused kernel image (initmem) memory: 3804K
[    1.717044] Write protecting the kernel read-only data: 30720k
[    1.718905] Freeing unused kernel image (text/rodata gap) memory: 732K
[    1.720957] Freeing unused kernel image (rodata/data gap) memory: 1588K
[    1.722909] Run /sbin/init as init process
INIT: version 3.14 booting
[    1.733653] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.736774] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
Starting udev
[    1.751614] udevd[143]: starting version 3.2.15
[    1.755363] udevd[144]: starting eudev-3.2.15
[    1.852573] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.985916] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    2.039772] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    2.098831] EXT4-fs (vda): re-mounted 6dedf79d-1044-4db6-8809-9a44d1c5a13e.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh ECDSA host key...
  generating ssh ML-DSA-44/ED25519 host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 6.1.99+snapshot-cfa43fa34c0072a1e9c64b05f0da8e6c322d2882 qemux86-64 /dev/ttyS0

Type 'root' to login with superuser privileges (no password will be asked).

qemux86-64 login: [   12.162075] __vm_enough_memory: pid: 402, comm: python3, bytes: 4398046511104 not enough memory for the allocation
[   24.751275] __vm_enough_memory: pid: 402, comm: python3, bytes: 4398046511104 not enough memory for the allocation
[   24.764433] __vm_enough_memory: pid: 402, comm: python3, bytes: 4398046511104 not enough memory for the allocation
[   24.777266] __vm_enough_memory: pid: 402, comm: python3, bytes: 4398046511104 not enough memory for the allocation
