# Makefile.in generated by automake 1.17 from Makefile.am.
# tests/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2024 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


VPATH = ../../git/tests
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/babeltrace2
pkgincludedir = $(includedir)/babeltrace2
pkglibdir = $(libdir)/babeltrace2
pkglibexecdir = $(libexecdir)/babeltrace2
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = aarch64-unknown-linux-gnu
host_triplet = aarch64-poky-linux-gnu
target_triplet = aarch64-poky-linux-gnu
#am__append_1 = bindings/python/bt2/test_python_bt2
am__append_2 = lib/test_plugin
#am__append_3 = plugins/src.ctf.fs/query/test_query_support_info \
#	plugins/src.ctf.fs/query/test_query_trace_info \
#	plugins/src.ctf.fs/query/test_query_metadata_info \
#	plugins/sink.ctf.fs/test_assume_single_trace \
#	plugins/sink.ctf.fs/test_stream_names
#am__append_4 = \
#	plugins/flt.lttng-utils.debug-info/test_dwarf_i386-linux-gnu \
#	plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc-linux-gnu \
#	plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc64le-linux-gnu \
#	plugins/flt.lttng-utils.debug-info/test_dwarf_x86_64-linux-gnu \
#	plugins/flt.lttng-utils.debug-info/test_bin_info_i386-linux-gnu \
#	plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc-linux-gnu \
#	plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc64le-linux-gnu \
#	plugins/flt.lttng-utils.debug-info/test_bin_info_x86_64-linux-gnu

##am__append_5 = \
##	cli/convert/test_auto_source_discovery_grouping \
##	cli/convert/test_auto_source_discovery_log_level \
##	cli/convert/test_auto_source_discovery_params \
##	cli/list-plugins/test_list_plugins \
##	cli/params/test_params \
##	cli/query/test_query \
##	cli/test_exit_status

##am__append_6 = plugins/flt.utils.trimmer/test_trimming \
##	plugins/flt.utils.muxer/succeed/test_succeed

am__append_7 = plugins/src.ctf.lttng-live/test_live
#am__append_8 = python-plugin-provider/test_python_plugin_provider
#am__append_9 = plugins/sink.text.pretty/test_pretty
##am__append_10 = \
##	plugins/flt.lttng-utils.debug-info/test_succeed

subdir = tests
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(dist_check_SCRIPTS) \
	$(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/common/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	check recheck distdir distdir-am
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
am__tty_colors_dummy = \
  mgn= red= grn= lgn= blu= brg= std=; \
  am__color_tests=no
am__tty_colors = { \
  $(am__tty_colors_dummy); \
  if test "X$(AM_COLOR_TESTS)" = Xno; then \
    am__color_tests=no; \
  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
    am__color_tests=yes; \
  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
    am__color_tests=yes; \
  fi; \
  if test $$am__color_tests = yes; then \
    red='[0;31m'; \
    grn='[0;32m'; \
    lgn='[1;32m'; \
    blu='[1;34m'; \
    mgn='[0;35m'; \
    brg='[1m'; \
    std='[m'; \
  fi; \
}
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
  }
am__recheck_rx = ^[ 	]*:recheck:[ 	]*
am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
  recheck = 1; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
        { \
          if ((getline line2 < ($$0 ".log")) < 0) \
	    recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
        { \
          recheck = 0; \
          break; \
        } \
      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
        { \
          break; \
        } \
    }; \
  if (recheck) \
    print $$0; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
  print "fatal: making $@: " msg | "cat >&2"; \
  exit 1; \
} \
function rst_section(header) \
{ \
  print header; \
  len = length(header); \
  for (i = 1; i <= len; i = i + 1) \
    printf "="; \
  printf "\n\n"; \
} \
{ \
  copy_in_global_log = 1; \
  global_test_result = "RUN"; \
  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
    { \
      if (rc < 0) \
         fatal("failed to read from " $$0 ".trs"); \
      if (line ~ /$(am__global_test_result_rx)/) \
        { \
          sub("$(am__global_test_result_rx)", "", line); \
          sub("[ 	]*$$", "", line); \
          global_test_result = line; \
        } \
      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
        copy_in_global_log = 0; \
    }; \
  if (copy_in_global_log) \
    { \
      rst_section(global_test_result ": " $$0); \
      while ((rc = (getline line < ($$0 ".log"))) != 0) \
      { \
        if (rc < 0) \
          fatal("failed to read from " $$0 ".log"); \
        print line; \
      }; \
      printf "\n"; \
    }; \
  close ($$0 ".trs"); \
  close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
  --color-tests "$$am__color_tests" \
  $$am__collect_skipped_logs \
  --enable-hard-errors "$$am__enable_hard_errors" \
  --expect-failure "$$am__expect_failure"
# To be inserted before the command running the test.  Creates the
# directory for the log if needed.  Stores in $dir the directory
# containing $f, in $tst the test, in $log the log.  Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup);					\
$(am__vpath_adj_setup) $(am__vpath_adj)			\
$(am__tty_colors);					\
srcdir=$(srcdir); export srcdir;			\
case "$@" in						\
  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
    *) am__odir=.;; 					\
esac;							\
test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
if test -f "./$$f"; then dir=./;			\
elif test -f "$$f"; then dir=;				\
else dir="$(srcdir)/"; fi;				\
tst=$$dir$$f; log='$@'; 				\
if test -n '$(IGNORE_SKIPPED_LOGS)'; then		\
  am__collect_skipped_logs='--collect-skipped-logs no';	\
else							\
  am__collect_skipped_logs='';				\
fi;							\
if test -n '$(DISABLE_HARD_ERRORS)'; then		\
  am__enable_hard_errors=no; 				\
else							\
  am__enable_hard_errors=yes; 				\
fi; 							\
case " $(XFAIL_TESTS) " in				\
  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
    am__expect_failure=yes;;				\
  *)							\
    am__expect_failure=no;;				\
esac; 							\
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed).  The result is saved in the shell variable
# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
  bases='$(TEST_LOGS)'; \
  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
  bases=`echo $$bases`
AM_TESTSUITE_SUMMARY_HEADER = ' for $(PACKAGE_STRING)'
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS =  .test
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
  case '$@' in \
    */*) \
      case '$*' in \
        */*) b='$*';; \
          *) b=`echo '$@' | sed 's/\.log$$//'`; \
       esac;; \
    *) \
      b='$*';; \
  esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_builddir)/config/test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
	$(TEST_LOG_FLAGS)
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in \
	$(top_srcdir)/config/test-driver
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} 'git/config/missing' aclocal-1.17
ALLOCA = 
AMTAR = $${TAR-tar}
AM_CFLAGS = -pthread -pthread -Irecipe-sysroot/usr/include/glib-2.0 -Irecipe-sysroot/usr/lib/glib-2.0/include -fno-strict-aliasing -Wnested-externs -Wmissing-prototypes -Wstrict-prototypes -Wdeclaration-after-statement -Wimplicit-function-declaration -Wold-style-definition -Wjump-misses-init -Wall -Wextra -Wundef -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wformat=2 -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wreturn-type -Wswitch-enum -Wswitch-default -Wduplicated-cond -Wduplicated-branches -Wlogical-op -Wrestrict -Wnull-dereference -Wdouble-promotion -Wno-sign-compare -Wno-inline -Wno-declaration-after-statement -Wno-switch-enum -Wno-switch-default -Wno-packed -Wno-pointer-arith -Wno-format-nonliteral -Wno-double-promotion -Wno-cast-align -Wno-cast-function-type -Wno-suggest-attribute=format -Wno-error=unused-parameter -Wno-error=missing-field-initializers -Wno-error=sign-compare -Wno-error=inline -Wno-error=declaration-after-statement -Wno-error=switch-enum -Wno-error=switch-default -Wno-error=packed -Wno-error=pointer-arith -Wno-error=format-nonliteral -Wno-error=double-promotion -Wno-error=cast-align -Wno-error=cast-function-type -Wold-style-definition -Werror=implicit-function-declaration
AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_builddir)/src -I$(top_srcdir)/src -include common/config.h
AM_DEFAULT_VERBOSITY = 1
AR = aarch64-poky-linux-gcc-ar
AS = aarch64-poky-linux-as 
ASCIIDOC = recipe-sysroot-native/usr/bin/asciidoc
AUTOCONF = ${SHELL} 'git/config/missing' autoconf
AUTOHEADER = ${SHELL} 'git/config/missing' autoheader
AUTOMAKE = ${SHELL} 'git/config/missing' automake-1.17
AWK = gawk
BABELTRACE_DEBUG_MODE = 0
BABELTRACE_DEV_MODE = 0
BABELTRACE_LIBRARY_VERSION = 0:0:0
BABELTRACE_MINIMAL_LOG_LEVEL = DEBUG
BABELTRACE_PLUGINS_DIR = ${libdir}/babeltrace2/plugins
BABELTRACE_PLUGIN_PROVIDERS_DIR = ${libdir}/babeltrace2/plugin-providers
BISON_VERSION = 3.8.2
CC = aarch64-poky-linux-gcc  -mcpu=cortex-a57+crc -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=recipe-sysroot
CCDEPMODE = depmode=none
CFLAGS =  -O2 -g -fcanon-prefix-map  -fmacro-prefix-map=git=/usr/src/debug/babeltrace2/2.0.6  -fdebug-prefix-map=git=/usr/src/debug/babeltrace2/2.0.6  -fmacro-prefix-map=build=/usr/src/debug/babeltrace2/2.0.6  -fdebug-prefix-map=build=/usr/src/debug/babeltrace2/2.0.6  -fdebug-prefix-map=recipe-sysroot=  -fmacro-prefix-map=recipe-sysroot=  -fdebug-prefix-map=recipe-sysroot-native=  -fmacro-prefix-map=recipe-sysroot-native=  -pipe
CPP = aarch64-poky-linux-gcc -E --sysroot=recipe-sysroot  -mcpu=cortex-a57+crc -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security
CPPFLAGS = 
CSCOPE = cscope
CTAGS = ctags
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DOXYGEN_PAPER_SIZE = 
DSYMUTIL = 
DUMPBIN = 
DX_CONFIG = 
DX_DOCDIR = 
DX_DOT = 
DX_DOXYGEN = 
DX_DVIPS = 
DX_EGREP = 
DX_ENV = 
DX_FLAG_chi = 
DX_FLAG_chm = 
DX_FLAG_doc = 
DX_FLAG_dot = 
DX_FLAG_html = 
DX_FLAG_man = 
DX_FLAG_pdf = 
DX_FLAG_ps = 
DX_FLAG_rtf = 
DX_FLAG_xml = 
DX_HHC = 
DX_LATEX = 
DX_MAKEINDEX = 
DX_PDFLATEX = 
DX_PERL = 
DX_PROJECT = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = grep -E
ELFUTILS_LIBS = 
ENABLE_DEBUG_INFO_VAL = 0
ETAGS = etags
EXEEXT = 
FGREP = grep -F
FILECMD = file
FLEX_VERSION = 2.6.4
GLIB_CFLAGS = -pthread -Irecipe-sysroot/usr/include/glib-2.0 -Irecipe-sysroot/usr/lib/glib-2.0/include
GLIB_COMPILE_RESOURCES = glib-compile-resources
GLIB_GENMARSHAL = glib-genmarshal
GLIB_LIBS = -lgmodule-2.0 -pthread -lglib-2.0
GLIB_MKENUMS = glib-mkenums
GOBJECT_QUERY = gobject-query
GREP = grep
INSTALL = install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = aarch64-poky-linux-ld --sysroot=recipe-sysroot 
LDFLAGS = -Wl,-O1 -Wl,--hash-style=gnu  -fcanon-prefix-map  -fmacro-prefix-map=git=/usr/src/debug/babeltrace2/2.0.6  -fdebug-prefix-map=git=/usr/src/debug/babeltrace2/2.0.6  -fmacro-prefix-map=build=/usr/src/debug/babeltrace2/2.0.6  -fdebug-prefix-map=build=/usr/src/debug/babeltrace2/2.0.6  -fdebug-prefix-map=recipe-sysroot=  -fmacro-prefix-map=recipe-sysroot=  -fdebug-prefix-map=recipe-sysroot-native=  -fmacro-prefix-map=recipe-sysroot-native=  -Wl,-z,relro,-z,now 
LD_NOTEXT = -Wl,-z,notext
LD_NO_AS_NEEDED = -Wl,--no-as-needed
LD_NO_WHOLE_ARCHIVE = ,--no-whole-archive
LD_WHOLE_ARCHIVE = -Wl,--whole-archive,
LEX = flex
LEXLIB = 
LEX_OUTPUT_ROOT = lex.yy
LIBDIR = /usr/lib
LIBOBJS =  ${LIBOBJDIR}mktime$U.o
LIBS =  -lgmodule-2.0 -pthread -lglib-2.0
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS =  ${LIBOBJDIR}mktime$U.lo
LT_NO_UNDEFINED = 
LT_SYS_LIBRARY_PATH = 
MAINT = 
MAKEINFO = ${SHELL} 'git/config/missing' makeinfo
MANIFEST_TOOL = :
MKDIR_P = mkdir -p
NM = aarch64-poky-linux-gcc-nm
NMEDIT = 
OBJDUMP = aarch64-poky-linux-objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = babeltrace2
PACKAGE_BUGREPORT = jeremie dot galarneau at efficios dot com
PACKAGE_NAME = babeltrace2
PACKAGE_STRING = babeltrace2 2.0.6
PACKAGE_TARNAME = babeltrace2
PACKAGE_URL = https://efficios.com/babeltrace/
PACKAGE_VERSION = 2.0.6
PATH_SEPARATOR = :
PKG_CONFIG = recipe-sysroot-native/usr/bin/pkg-config
PKG_CONFIG_LIBDIR = recipe-sysroot/usr/lib/pkgconfig
PKG_CONFIG_PATH = recipe-sysroot/usr/lib/pkgconfig:recipe-sysroot/usr/share/pkgconfig
PTHREAD_CC = aarch64-poky-linux-gcc  -mcpu=cortex-a57+crc -mbranch-protection=standard -fstack-protector-strong  -O2 -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -Werror=format-security --sysroot=recipe-sysroot
PTHREAD_CFLAGS = -pthread
PTHREAD_LIBS = -lpthread
PYTHON = recipe-sysroot-native/usr/bin/python3-native/python3
PYTHON_CONFIG = 
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_INCLUDE = 
PYTHON_LDFLAGS = 
PYTHON_LIB_PREFIX = ${libdir}
PYTHON_PLATFORM = linux
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 3.12
RANLIB = aarch64-poky-linux-gcc-ranlib
SED = sed
SET_MAKE = 
SHELL = /bin/bash
STRIP = aarch64-poky-linux-strip
SWIG = 
SWIG_LIB = 
VERSION = 2.0.6
WARN_CFLAGS = -fno-strict-aliasing -Wnested-externs -Wmissing-prototypes -Wstrict-prototypes -Wdeclaration-after-statement -Wimplicit-function-declaration -Wold-style-definition -Wjump-misses-init -Wall -Wextra -Wundef -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wformat=2 -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wreturn-type -Wswitch-enum -Wswitch-default -Wduplicated-cond -Wduplicated-branches -Wlogical-op -Wrestrict -Wnull-dereference -Wdouble-promotion -Wno-sign-compare -Wno-inline -Wno-declaration-after-statement -Wno-switch-enum -Wno-switch-default -Wno-packed -Wno-pointer-arith -Wno-format-nonliteral -Wno-double-promotion -Wno-cast-align -Wno-cast-function-type -Wno-suggest-attribute=format -Wno-error=unused-parameter -Wno-error=missing-field-initializers -Wno-error=sign-compare -Wno-error=inline -Wno-error=declaration-after-statement -Wno-error=switch-enum -Wno-error=switch-default -Wno-error=packed -Wno-error=pointer-arith -Wno-error=format-nonliteral -Wno-error=double-promotion -Wno-error=cast-align -Wno-error=cast-function-type
WARN_LDFLAGS = -Wl,--no-as-needed
WARN_SCANNERFLAGS =               --warn-all                                                             
XMLTO = recipe-sysroot-native/usr/bin/xmlto
YACC = bison -y
YFLAGS = 
abs_builddir = build/tests
abs_srcdir = build/../git/tests
abs_top_builddir = build
abs_top_srcdir = build/../git
ac_ct_AR = 
ac_ct_CC = 
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__rm_f_notfound = 
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
am__xargs_n = xargs -n
ax_pthread_config = 
bindir = /usr/bin
build = aarch64-unknown-linux-gnu
build_alias = aarch64-linux
build_cpu = aarch64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = /usr/share
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = /usr
host = aarch64-poky-linux-gnu
host_alias = aarch64-poky-linux
host_cpu = aarch64
host_os = linux-gnu
host_vendor = poky
htmldir = ${docdir}
includedir = /usr/include
infodir = /usr/share/info
install_sh = ${SHELL} git/config/install-sh
libdir = /usr/lib
libexecdir = /usr/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/share/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/babeltrace2
pkgpythondir = ${pythondir}/babeltrace2
pprint_tput = 
prefix = /usr
program_transform_name = s&babeltrace2\.bin&babeltrace2&;s,x,x,
psdir = ${docdir}
pyexecdir = ${exec_prefix}//lib/python3.12/site-packages
pythondir = ${prefix}//lib/python3.12/site-packages
report_fold = 
runstatedir = ${localstatedir}/run
sbindir = /usr/sbin
sharedstatedir = /com
srcdir = .
sysconfdir = /etc
target = aarch64-poky-linux-gnu
target_alias = aarch64-poky-linux
target_cpu = aarch64
target_os = linux-gnu
target_vendor = poky
top_build_prefix = ../
top_builddir = ..
top_srcdir = ../../git
SUBDIRS = \
	utils \
	lib \
	bitfield \
	ctf-writer \
	plugins \
	param-validation


# Directories added to EXTRA_DIST will be recursively copied to the distribution.
EXTRA_DIST = $(srcdir)/data \
	     bindings/python/bt2/.coveragerc

dist_check_SCRIPTS = \
	bindings/python/bt2/test_clock_class.py \
	bindings/python/bt2/test_component_class.py \
	bindings/python/bt2/test_component.py \
	bindings/python/bt2/test_connection.py \
	bindings/python/bt2/test_event_class.py \
	bindings/python/bt2/test_event.py \
	bindings/python/bt2/test_field_class.py \
	bindings/python/bt2/test_field.py \
	bindings/python/bt2/test_graph.py \
	bindings/python/bt2/test_integer_range_set.py \
	bindings/python/bt2/test_interrupter.py \
	bindings/python/bt2/test_message_iterator.py \
	bindings/python/bt2/test_message.py \
	bindings/python/bt2/test_package.py \
	bindings/python/bt2/test_packet.py \
	bindings/python/bt2/test_plugin.py \
	bindings/python/bt2/test_port.py \
	bindings/python/bt2/test_python_bt2 \
	bindings/python/bt2/test_query_executor.py \
	bindings/python/bt2/test_stream_class.py \
	bindings/python/bt2/test_stream.py \
	bindings/python/bt2/test_trace_collection_message_iterator.py \
	bindings/python/bt2/test_trace.py \
	bindings/python/bt2/test_value.py \
	bindings/python/bt2/utils.py \
	cli/convert/test_auto_source_discovery_grouping \
	cli/convert/test_auto_source_discovery_params \
	cli/convert/test_auto_source_discovery_log_level \
	cli/convert/test_convert_args \
	cli/list-plugins/test_list_plugins \
	cli/params/test_params \
	cli/query/test_query \
	cli/test_exit_status \
	cli/test_help \
	cli/test_intersection \
	cli/test_output_ctf_metadata \
	cli/test_output_path_ctf_non_lttng_trace \
	cli/test_packet_seq_num \
	cli/test_trace_copy \
	cli/test_trace_read \
	cli/test_trimmer \
	plugins/sink.text.details/succeed/test_succeed \
	plugins/sink.text.pretty/test_pretty \
	plugins/sink.text.pretty/test_pretty.py \
	plugins/src.ctf.lttng-live/test_live \
	python-plugin-provider/bt_plugin_test_python_plugin_provider.py \
	python-plugin-provider/test_python_plugin_provider \
	python-plugin-provider/test_python_plugin_provider.py

TESTS_BINDINGS = $(am__append_1)
TESTS_CLI = cli/convert/test_convert_args cli/test_help \
	cli/test_intersection cli/test_output_path_ctf_non_lttng_trace \
	cli/test_packet_seq_num cli/test_trace_copy \
	cli/test_trace_read cli/test_trimmer $(am__append_5)
TESTS_LIB = lib/test_bt_uuid lib/test_bt_values lib/test_graph_topo \
	lib/test_remove_destruction_listener_in_destruction_listener \
	lib/test_simple_sink lib/test_trace_ir_ref $(am__append_2)
TESTS_BITFIELD = \
	bitfield/test_bitfield

TESTS_CTF_WRITER = \
	ctf-writer/test_ctf_writer

TESTS_PLUGINS = plugins/src.ctf.fs/fail/test_fail \
	plugins/src.ctf.fs/succeed/test_succeed \
	plugins/src.ctf.fs/test_deterministic_ordering \
	plugins/sink.ctf.fs/succeed/test_succeed \
	plugins/sink.text.details/succeed/test_succeed $(am__append_3) \
	$(am__append_4) $(am__append_6) $(am__append_7) \
	$(am__append_9) $(am__append_10)
TESTS_PYTHON_PLUGIN_PROVIDER = $(am__append_8)
TESTS_PARAM_VALIDATION = \
	param-validation/test_param_validation

LOG_DRIVER_FLAGS = --merge --comments
LOG_DRIVER = env AM_TAP_AWK='$(AWK)' \
	     BT_TESTS_SRCDIR='$(abs_top_srcdir)/tests' \
	     BT_TESTS_BUILDDIR='$(abs_top_builddir)/tests' \
	     BT_TESTS_AWK_BIN="$(AWK)" \
	     BT_TESTS_GREP_BIN="$(GREP)" \
	     BT_TESTS_PYTHON_BIN="$(PYTHON)" \
	     BT_TESTS_PYTHON_CONFIG_BIN="$(PYTHON_CONFIG)" \
	     BT_TESTS_SED_BIN="$(SED)" \
	     $(SHELL) $(srcdir)/utils/tap-driver.sh

TESTS_NO_BITFIELD = \
	$(TESTS_BINDINGS) \
	$(TESTS_CLI) \
	$(TESTS_CTF_WRITER) \
	$(TESTS_LIB) \
	$(TESTS_PARAM_VALIDATION) \
	$(TESTS_PLUGINS) \
	$(TESTS_PYTHON_PLUGIN_PROVIDER)

TESTS = $(TESTS_NO_BITFIELD) $(TESTS_BITFIELD)
all: all-recursive

.SUFFIXES:
.SUFFIXES: .log .test .test$(EXEEXT) .trs
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign tests/Makefile
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
	rm -f $< $@
	$(MAKE) $(AM_MAKEFLAGS) $<

# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
	@:
$(TEST_SUITE_LOG): $(TEST_LOGS)
	@$(am__set_TESTS_bases); \
	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
	redo_bases=`for i in $$bases; do \
	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
	            done`; \
	if test -n "$$redo_bases"; then \
	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
	  if $(am__make_dryrun); then :; else \
	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
	  fi; \
	fi; \
	if test -n "$$am__remaking_logs"; then \
	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
	       "recursion detected" >&2; \
	elif test -n "$$redo_logs"; then \
	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
	fi; \
	if $(am__make_dryrun); then :; else \
	  st=0;  \
	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
	  for i in $$redo_bases; do \
	    test -f $$i.trs && test -r $$i.trs \
	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
	    test -f $$i.log && test -r $$i.log \
	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
	  done; \
	  test $$st -eq 0 || exit 1; \
	fi
	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
	ws='[ 	]'; \
	results=`for b in $$bases; do echo $$b.trs; done`; \
	test -n "$$results" || results=/dev/null; \
	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
	  success=true; \
	else \
	  success=false; \
	fi; \
	br='==================='; br=$$br$$br$$br$$br; \
	result_count () \
	{ \
	    if test x"$$1" = x"--maybe-color"; then \
	      maybe_colorize=yes; \
	    elif test x"$$1" = x"--no-color"; then \
	      maybe_colorize=no; \
	    else \
	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
	    fi; \
	    shift; \
	    desc=$$1 count=$$2; \
	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
	      color_start=$$3 color_end=$$std; \
	    else \
	      color_start= color_end=; \
	    fi; \
	    echo "$${color_start}# $$desc $$count$${color_end}"; \
	}; \
	create_testsuite_report () \
	{ \
	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
	  result_count $$1 "PASS: " $$pass  "$$grn"; \
	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
	  result_count $$1 "FAIL: " $$fail  "$$red"; \
	  result_count $$1 "XPASS:" $$xpass "$$red"; \
	  result_count $$1 "ERROR:" $$error "$$mgn"; \
	}; \
	output_system_information () \
	{ \
          echo;                                     \
	  { uname -a | $(AWK) '{                    \
  printf "System information (uname -a):";          \
  for (i = 1; i < NF; ++i)                          \
    {                                               \
      if (i != 2)                                   \
        printf " %s", $$i;                          \
    }                                               \
  printf "\n";                                      \
}'; } 2>&1;                                         \
	  if test -r /etc/os-release; then          \
	    echo "Distribution information (/etc/os-release):"; \
	    sed 8q /etc/os-release;                 \
	  elif test -r /etc/issue; then             \
	    echo "Distribution information (/etc/issue):";      \
	    cat /etc/issue;                         \
	  fi;                                       \
	}; \
	please_report () \
	{ \
echo "Some test(s) failed.  Please report this to $(PACKAGE_BUGREPORT),";    \
echo "together with the test-suite.log file (gzipped) and your system";      \
echo "information.  Thanks.";                                                \
	}; \
	{								\
	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
	    $(am__rst_title);						\
	  create_testsuite_report --no-color;				\
	  output_system_information;                                    \
	  echo;								\
	  echo ".. contents:: :depth: 2";				\
	  echo;								\
	  for b in $$bases; do echo $$b; done				\
	    | $(am__create_global_log);					\
	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
	if $$success; then						\
	  col="$$grn";							\
	 else								\
	  col="$$red";							\
	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
	fi;								\
	echo "$${col}$$br$${std}"; 					\
	echo "$${col}Testsuite summary"$(AM_TESTSUITE_SUMMARY_HEADER)"$${std}";	\
	echo "$${col}$$br$${std}"; 					\
	create_testsuite_report --maybe-color;				\
	echo "$$col$$br$$std";						\
	if $$success; then :; else					\
	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG) for debugging.$${std}";\
	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
	    please_report | sed -e "s/^/$${col}/" -e s/'$$'/"$${std}"/; \
	  fi;								\
	  echo "$$col$$br$$std";					\
	fi;								\
	$$success || exit 1

check-TESTS: $(dist_check_SCRIPTS)
	@$(am__rm_f) $(RECHECK_LOGS)
	@$(am__rm_f) $(RECHECK_LOGS:.log=.trs)
	@$(am__rm_f) $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
	exit $$?;
recheck: all $(dist_check_SCRIPTS)
	@$(am__rm_f) $(TEST_SUITE_LOG)
	@set +e; $(am__set_TESTS_bases); \
	bases=`for i in $$bases; do echo $$i; done \
	         | $(am__list_recheck_tests)` || exit 1; \
	log_list=`for i in $$bases; do echo $$i.log; done`; \
	log_list=`echo $$log_list`; \
	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
	        am__force_recheck=am--force-recheck \
	        TEST_LOGS="$$log_list"; \
	exit $$?
bindings/python/bt2/test_python_bt2.log: bindings/python/bt2/test_python_bt2
	@p='bindings/python/bt2/test_python_bt2'; \
	b='bindings/python/bt2/test_python_bt2'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/convert/test_convert_args.log: cli/convert/test_convert_args
	@p='cli/convert/test_convert_args'; \
	b='cli/convert/test_convert_args'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/test_help.log: cli/test_help
	@p='cli/test_help'; \
	b='cli/test_help'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/test_intersection.log: cli/test_intersection
	@p='cli/test_intersection'; \
	b='cli/test_intersection'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/test_output_path_ctf_non_lttng_trace.log: cli/test_output_path_ctf_non_lttng_trace
	@p='cli/test_output_path_ctf_non_lttng_trace'; \
	b='cli/test_output_path_ctf_non_lttng_trace'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/test_packet_seq_num.log: cli/test_packet_seq_num
	@p='cli/test_packet_seq_num'; \
	b='cli/test_packet_seq_num'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/test_trace_copy.log: cli/test_trace_copy
	@p='cli/test_trace_copy'; \
	b='cli/test_trace_copy'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/test_trace_read.log: cli/test_trace_read
	@p='cli/test_trace_read'; \
	b='cli/test_trace_read'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/test_trimmer.log: cli/test_trimmer
	@p='cli/test_trimmer'; \
	b='cli/test_trimmer'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/convert/test_auto_source_discovery_grouping.log: cli/convert/test_auto_source_discovery_grouping
	@p='cli/convert/test_auto_source_discovery_grouping'; \
	b='cli/convert/test_auto_source_discovery_grouping'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/convert/test_auto_source_discovery_log_level.log: cli/convert/test_auto_source_discovery_log_level
	@p='cli/convert/test_auto_source_discovery_log_level'; \
	b='cli/convert/test_auto_source_discovery_log_level'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/convert/test_auto_source_discovery_params.log: cli/convert/test_auto_source_discovery_params
	@p='cli/convert/test_auto_source_discovery_params'; \
	b='cli/convert/test_auto_source_discovery_params'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/list-plugins/test_list_plugins.log: cli/list-plugins/test_list_plugins
	@p='cli/list-plugins/test_list_plugins'; \
	b='cli/list-plugins/test_list_plugins'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/params/test_params.log: cli/params/test_params
	@p='cli/params/test_params'; \
	b='cli/params/test_params'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/query/test_query.log: cli/query/test_query
	@p='cli/query/test_query'; \
	b='cli/query/test_query'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
cli/test_exit_status.log: cli/test_exit_status
	@p='cli/test_exit_status'; \
	b='cli/test_exit_status'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
ctf-writer/test_ctf_writer.log: ctf-writer/test_ctf_writer
	@p='ctf-writer/test_ctf_writer'; \
	b='ctf-writer/test_ctf_writer'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
lib/test_bt_uuid.log: lib/test_bt_uuid
	@p='lib/test_bt_uuid'; \
	b='lib/test_bt_uuid'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
lib/test_bt_values.log: lib/test_bt_values
	@p='lib/test_bt_values'; \
	b='lib/test_bt_values'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
lib/test_graph_topo.log: lib/test_graph_topo
	@p='lib/test_graph_topo'; \
	b='lib/test_graph_topo'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
lib/test_remove_destruction_listener_in_destruction_listener.log: lib/test_remove_destruction_listener_in_destruction_listener
	@p='lib/test_remove_destruction_listener_in_destruction_listener'; \
	b='lib/test_remove_destruction_listener_in_destruction_listener'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
lib/test_simple_sink.log: lib/test_simple_sink
	@p='lib/test_simple_sink'; \
	b='lib/test_simple_sink'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
lib/test_trace_ir_ref.log: lib/test_trace_ir_ref
	@p='lib/test_trace_ir_ref'; \
	b='lib/test_trace_ir_ref'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
lib/test_plugin.log: lib/test_plugin
	@p='lib/test_plugin'; \
	b='lib/test_plugin'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
param-validation/test_param_validation.log: param-validation/test_param_validation
	@p='param-validation/test_param_validation'; \
	b='param-validation/test_param_validation'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/src.ctf.fs/fail/test_fail.log: plugins/src.ctf.fs/fail/test_fail
	@p='plugins/src.ctf.fs/fail/test_fail'; \
	b='plugins/src.ctf.fs/fail/test_fail'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/src.ctf.fs/succeed/test_succeed.log: plugins/src.ctf.fs/succeed/test_succeed
	@p='plugins/src.ctf.fs/succeed/test_succeed'; \
	b='plugins/src.ctf.fs/succeed/test_succeed'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/src.ctf.fs/test_deterministic_ordering.log: plugins/src.ctf.fs/test_deterministic_ordering
	@p='plugins/src.ctf.fs/test_deterministic_ordering'; \
	b='plugins/src.ctf.fs/test_deterministic_ordering'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/sink.ctf.fs/succeed/test_succeed.log: plugins/sink.ctf.fs/succeed/test_succeed
	@p='plugins/sink.ctf.fs/succeed/test_succeed'; \
	b='plugins/sink.ctf.fs/succeed/test_succeed'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/sink.text.details/succeed/test_succeed.log: plugins/sink.text.details/succeed/test_succeed
	@p='plugins/sink.text.details/succeed/test_succeed'; \
	b='plugins/sink.text.details/succeed/test_succeed'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/src.ctf.fs/query/test_query_support_info.log: plugins/src.ctf.fs/query/test_query_support_info
	@p='plugins/src.ctf.fs/query/test_query_support_info'; \
	b='plugins/src.ctf.fs/query/test_query_support_info'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/src.ctf.fs/query/test_query_trace_info.log: plugins/src.ctf.fs/query/test_query_trace_info
	@p='plugins/src.ctf.fs/query/test_query_trace_info'; \
	b='plugins/src.ctf.fs/query/test_query_trace_info'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/src.ctf.fs/query/test_query_metadata_info.log: plugins/src.ctf.fs/query/test_query_metadata_info
	@p='plugins/src.ctf.fs/query/test_query_metadata_info'; \
	b='plugins/src.ctf.fs/query/test_query_metadata_info'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/sink.ctf.fs/test_assume_single_trace.log: plugins/sink.ctf.fs/test_assume_single_trace
	@p='plugins/sink.ctf.fs/test_assume_single_trace'; \
	b='plugins/sink.ctf.fs/test_assume_single_trace'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/sink.ctf.fs/test_stream_names.log: plugins/sink.ctf.fs/test_stream_names
	@p='plugins/sink.ctf.fs/test_stream_names'; \
	b='plugins/sink.ctf.fs/test_stream_names'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.lttng-utils.debug-info/test_dwarf_i386-linux-gnu.log: plugins/flt.lttng-utils.debug-info/test_dwarf_i386-linux-gnu
	@p='plugins/flt.lttng-utils.debug-info/test_dwarf_i386-linux-gnu'; \
	b='plugins/flt.lttng-utils.debug-info/test_dwarf_i386-linux-gnu'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc-linux-gnu.log: plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc-linux-gnu
	@p='plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc-linux-gnu'; \
	b='plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc-linux-gnu'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc64le-linux-gnu.log: plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc64le-linux-gnu
	@p='plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc64le-linux-gnu'; \
	b='plugins/flt.lttng-utils.debug-info/test_dwarf_powerpc64le-linux-gnu'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.lttng-utils.debug-info/test_dwarf_x86_64-linux-gnu.log: plugins/flt.lttng-utils.debug-info/test_dwarf_x86_64-linux-gnu
	@p='plugins/flt.lttng-utils.debug-info/test_dwarf_x86_64-linux-gnu'; \
	b='plugins/flt.lttng-utils.debug-info/test_dwarf_x86_64-linux-gnu'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.lttng-utils.debug-info/test_bin_info_i386-linux-gnu.log: plugins/flt.lttng-utils.debug-info/test_bin_info_i386-linux-gnu
	@p='plugins/flt.lttng-utils.debug-info/test_bin_info_i386-linux-gnu'; \
	b='plugins/flt.lttng-utils.debug-info/test_bin_info_i386-linux-gnu'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc-linux-gnu.log: plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc-linux-gnu
	@p='plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc-linux-gnu'; \
	b='plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc-linux-gnu'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc64le-linux-gnu.log: plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc64le-linux-gnu
	@p='plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc64le-linux-gnu'; \
	b='plugins/flt.lttng-utils.debug-info/test_bin_info_powerpc64le-linux-gnu'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.lttng-utils.debug-info/test_bin_info_x86_64-linux-gnu.log: plugins/flt.lttng-utils.debug-info/test_bin_info_x86_64-linux-gnu
	@p='plugins/flt.lttng-utils.debug-info/test_bin_info_x86_64-linux-gnu'; \
	b='plugins/flt.lttng-utils.debug-info/test_bin_info_x86_64-linux-gnu'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.utils.trimmer/test_trimming.log: plugins/flt.utils.trimmer/test_trimming
	@p='plugins/flt.utils.trimmer/test_trimming'; \
	b='plugins/flt.utils.trimmer/test_trimming'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.utils.muxer/succeed/test_succeed.log: plugins/flt.utils.muxer/succeed/test_succeed
	@p='plugins/flt.utils.muxer/succeed/test_succeed'; \
	b='plugins/flt.utils.muxer/succeed/test_succeed'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/src.ctf.lttng-live/test_live.log: plugins/src.ctf.lttng-live/test_live
	@p='plugins/src.ctf.lttng-live/test_live'; \
	b='plugins/src.ctf.lttng-live/test_live'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/sink.text.pretty/test_pretty.log: plugins/sink.text.pretty/test_pretty
	@p='plugins/sink.text.pretty/test_pretty'; \
	b='plugins/sink.text.pretty/test_pretty'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
plugins/flt.lttng-utils.debug-info/test_succeed.log: plugins/flt.lttng-utils.debug-info/test_succeed
	@p='plugins/flt.lttng-utils.debug-info/test_succeed'; \
	b='plugins/flt.lttng-utils.debug-info/test_succeed'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
python-plugin-provider/test_python_plugin_provider.log: python-plugin-provider/test_python_plugin_provider
	@p='python-plugin-provider/test_python_plugin_provider'; \
	b='python-plugin-provider/test_python_plugin_provider'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
bitfield/test_bitfield.log: bitfield/test_bitfield
	@p='bitfield/test_bitfield'; \
	b='bitfield/test_bitfield'; \
	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
	@p='$<'; \
	$(am__set_b); \
	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
	--log-file $$b.log --trs-file $$b.trs \
	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
	"$$tst" $(AM_TESTS_FD_REDIRECT)
#.test$(EXEEXT).log:
#	@p='$<'; \
#	$(am__set_b); \
#	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
#	--log-file $$b.log --trs-file $$b.trs \
#	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
#	"$$tst" $(AM_TESTS_FD_REDIRECT)
distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(dist_check_SCRIPTS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
all-am:
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:
	-$(am__rm_f) $(TEST_LOGS)
	-$(am__rm_f) $(TEST_LOGS:.log=.trs)
	-$(am__rm_f) $(TEST_SUITE_LOG)

clean-generic:

distclean-generic:
	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(am__recursive_targets) check-am install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
	buildtest-TESTS check check-TESTS check-am clean clean-generic \
	clean-libtool cscopelist-am ctags ctags-am distclean \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	recheck runtest-TESTS tags tags-am uninstall uninstall-am

.PRECIOUS: Makefile


define check_target
check-$(1):
	$(MAKE) $(AM_MAKEFLAGS) TESTS="$2" check
endef

$(eval $(call check_target,bindings,$(TESTS_BINDINGS)))
$(eval $(call check_target,bitfield,$(TESTS_BITFIELD)))
$(eval $(call check_target,cli,$(TESTS_CLI)))
$(eval $(call check_target,ctf-writer,$(TESTS_CTF_WRITER)))
$(eval $(call check_target,lib,$(TESTS_LIB)))
$(eval $(call check_target,plugins,$(TESTS_PLUGINS)))
$(eval $(call check_target,python-plugin-provider,$(TESTS_PYTHON_PLUGIN_PROVIDER)))

check-no-bitfield:
	$(MAKE) $(AM_MAKEFLAGS) TESTS="$(TESTS_NO_BITFIELD)" check

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%
